Netgear GS108Tv2 GS108Tv2/GS110TP Software Reference Manual - Page 52
Host Configuration
View all Netgear GS108Tv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
GS108T and GS110TP Smart Switch Software Administration Manual 3. To specify the DNS server to which the switch sends DNS queries, enter an IP address in standard IPv4 dot notation in the DNS Server Address and click Add. The server appears in the list below. You can specify up to eight DNS servers. The precedence is set in the order created. 4. To remove a DNS server from the list, select the check box next to the server you want to remove and click Delete. If no DNS server is specified, the check box is global and will delete all the DNS servers listed. 5. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 6. Click Apply to send the updated configuration to the switch. Configuration changes take effect immediately. Host Configuration Use this page to manually map host names to IP addresses or to view dynamic DNS mappings. To access this page, click System Management DNS Host Configuration. Figure 2-8 To add a static entry to the local DNS table: 1. Specify the static host name to add. Enter up to 158 characters. 2-16 v1.0, April 2010 Configuring System Information