Netgear GS510TP GS510TP Install Guide - Page 2

GS510TP IG 19Sept11.fm Page 2 Monday, September 19, 2011 1:50 PM Make sure the switch has completed its boot cycle and is operational before you click Discover. The Smart Control Center utility finds the switch and displays information such as its MAC Address, IP Address, and model number. Web Browser Access Button Discover Button If you cannot view your switch, verify that the cable connections are secure and that the IP address configuration of the administrative computer is in the same subnet as the switch. Then click the Discover button. 3. Click to select the line displaying the details of your switch. If there are multiple Smart Switches in your network, then be sure to select the switch you want to configure. September 2011 4. Click Web Browser Access to launch a Web browser on the administrative computer and view the switch log in screen. The Login dialog appears. 5. Enter the default password of password in lowercase letters and click Login. The System Information page appears. 6. Configure the switch for your network. For information about switch features and for assistance with configuration procedures, consult the online Software Administration Manual. For information about each field to view or configure, click the help icon available on each page of the switch user interface. Troubleshooting Tips • The GS510TP Smart Switch must be operational before you discover it. After you power up the GS510TP switch, wait at least two minutes before you click the Discover button on the Smart Control Center utility. • Make sure the Ethernet cables are securely plugged in. For each powered-on device connected to the Smart Switch with a securely plugged in Ethernet cable, the corresponding port status LED will light. • Make sure the administrative computer's network settings are correct. In most cases, computers are configured to obtain an IP address automatically via DHCP. If your network uses static IP addresses, be sure the switch and computer are configured with valid IP addresses that are in the same subnet. Technical Support Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label of your product and use it to register your product at http://www.NETGEAR.com/register. Registration is required before you can use the telephone support service. Registration via our website is strongly recommended. Go to http://support.netgear.com for product updates and web support. For additional information about setting up, configuring, and using your switch, see the Software Administration Manual. For complete DoC, please visit the NETGEAR EU Declarations of Conformity website at: http://support.netgear.com/app/answers/detail/a_id/11621/. This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union, this product should be treated and recycled in accordance with the laws of your jurisdiction implementing the WEEE Directive. ©2011 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registered trademarks of NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice.