Netgear GS716Tv1 GS716T Product datasheet - Page 2

ProSafe™ 16- and 24-Port Gigabit Smart Switches GS716T, GS724T Technical Specifications • Network Protocol and Standards Compatibility - IEEE 802.3 10BASE-T Ethernet - IEEE 802.3u 100BASE-TX Fast Ethernet - IEEE 802.3ab 1000BASE-T Gigabit Ethernet - IEEE 802.3x full-duplex flow control • Interfaces - GS724T: 24 RJ-45 connectors for 10BASE-T, 100BASE-TX, and 1000BASE-T (Auto Uplink on all ports) - GS716T: 16 RJ-45 connectors for 10BASE-T, 100BASE-TX and 1000BASE-T (Auto Uplink on all ports) - 2 SFP slots for fiber Gigabit Ethernet modules • Administrative Switch Management - IEEE 802.1D Spanning Tree Protocol - RFC 1157 SNMP v1, v2c - RFC 1213 MIB II - RFC 1643 Ethernet Interface MIB - RFC1493 Bridge MIB - Private Enterprise MIB - Jumbo Frame Support (up to 9216 bytes) - IEEE 802.1Q Tag VLAN (up to 64 Static VLAN groups) - Port-based VLAN (up to 24 groups) - IEEE 802.1p (Class of Service) - Diffserv - Port-based QoS (options High/Normal) - Port Trunking - Manual as per IEEE802.3ad Link Aggregation - DHCP client function - Port mirroring (many to one) - Port setting - Web-based configuration, anywhere on the network - Smartwizard Discovery Utility program auto discovers devices (up to 254 agents/switches); set system configuration to each agent - Configuration Backup/Restore (easy to configure more than one switch) - Password access control and Restricted IP Access List - Firmware upgradeable • Active Flow Control - Full-duplex IEEE 802.3x pause frame flow control - Half-duplex back-pressure control • Performance Specifications - Forwarding modes: Store-and-forward - Bandwidth: GS724T = 48 Gbps, GS716T = 32 Gbps - Network latency: Less than 20 µs for 64byte frames in store-and-forward mode for100 Mbps to 100 Mbps transmission - Buffer memory: 256 KB embedded memory per unit - Priority Queues: 4 - Priority Queuing: Weighted Round Robin (WRR) - Address database size: 8,000 media access control (MAC) addresses per system - Addressing: 48-bit MAC address - Mean Time Between Failure (MTBF): GS724T = 115,221 hours (~ 13 years), GS716T = 65,789 (~7.5 years) - Acoustic Noise: - GS724T = 41 dBA - GS716T = 42.5 dBA • LEDs - Unit: power - Per port: link, activity, speed, duplex • Power Supply - Power Consumption: 29 W maximum - 100-240VAC/50-60 Hz universal input • Physical Specifications - Dimensions (h x w x d): 1.7 x 17.3 x 8.1 in (43 x 440 x 205 mm) - Weight: 5.9 lb (2.7 kg) • Environmental Specifications - Operating temperature: 32° to 104°F (0° to 40° C) - Storage temperature: -4° to 158°F (-20° to 70° C) - Operating humidity: 90% maximum relative humidity, non-condensing - Storage humidity: 95% maximum relative humidity, non-condensing - Operating altitude: 10,000 ft (3,000 m) maximum - Storage altitude: 10,000 ft (3,000 m) maximum • Electromagnetic Compliance - CE mark, commercial - FCC Part 15 Class A - VCCI Class A - EN 55022 (CISPR 22) - EN 55024 (CISPR 24) - C-Tick • Safety Agency Approvals - UL listed (UL 1950)/cUL - IEC950/EN60950 - CE mark, commercial - CUL 60950 (Listed)/EN60950 (Low Voltage Directive) System Requirements - Category 5 network cables - Network card for each PC - Network software (e.g., Windows®) Modules - NETGEAR ProSafe AGM731F 1000BASE-SX SFP GBIC Module with LC connectors for 50um or 62.5um multi-mode fiber cable - NETGEAR ProSafe AGM732F Fiber 1000BASE-LX SFP GBIC Module with LC connectors for 9um single-mode fiber cable - NETGEAR ProSafe AGM733 Fiber 1000BASE-ZX SFP GBIC Module with LC connectors for 9um single-mode fiber cable Warranty - NETGEAR Lifetime Warranty† ProSupport™ Service Packs Available • On Call 24 x 7 - PMB0331-100 (US) - PMB0331 (non-US) • Xpress HW - PRR0331 Package Contents - 24-port Gigabit Smart Switch (GS724T) - Rubber footpads - Power cord - Rack-mount kit - Smart Switch resource CD - Smart Switch installation guide - Warranty/support information card