Netgear GS716Tv2 GS716Tv2/GS724Tv3 Installation Guide - Page 2

Technical Support - default ip address

Get Netgear GS716Tv2 - ProSafe Gigabit Managed Switch PDF manuals and user guides View all Netgear GS716Tv2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 2 highlights

cable connections are secure, that the IP address configuration of the PC is in the same subnet as the switch, and click the Discover button. 3. Click to select the line displaying the details of your switch. If there are multiple switches in your network, be sure to select the one you want to configure. 4. Click Web Access to view the switch log in screen. 5. Enter the default password of password in lower case letters and click Login. The switch will display the switch settings main page. Configure the switch for your network. Consult the Reference Manual on the Resource CD or the online help in the switch for assistance with configuration procedures. After you log in to the switch, the main Web Access menu displays. Use the configuration menu options to configure your switch. Troubleshooting Tips Here are some tips for correcting simple problems you may have. • Be sure to power on your PC and switch in the correct sequence. Follow this sequence. Turn off the switch and computer. First, turn on the switch and wait two minutes. Next, turn on the computer. • Make sure the Ethernet cables are securely plugged in. For each powered on computer connected to the switch with a securely plugged in Ethernet cable, the corresponding switch LAN port status light will be lit. • Make sure the network settings of the computer are correct. In most cases, computers should be configured to obtain an IP address automatically via DHCP. For help with this, refer to the GS716T/GS724T Reference Manual; a link to the online Reference Manual is on the Resource CD. If your network uses static IP addresses, be sure the switch and computer are configured with valid IP addresses. Technical Support Thank you for selecting NETGEAR products. After completing the Smart Wizard configuration assistant, locate the serial number on the bottom label of your product, and use it to register your product at http://www.NETGEAR.com/register. Registration is required before you can use our telephone support service. Registration via our website is strongly recommended. Go to http://kbserver.netgear.com for product updates and Web support. For Warranty and Regional Customer Support information, see the Resource CD that came with your product. This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union, this product should be treated and recycled in accordance with the laws of your jurisdiction implementing the WEEE Directive. © 2009 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registered trademarks of NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice. April 2009

  • 1
  • 2
This symbol was placed in accordance with the European Union Directive 2002/96 on
the Waste Electrical and Electronic Equipment (the WEEE Directive). If disposed of
within the European Union, this product should be treated and recycled in accordance
with the laws of your jurisdiction implementing the WEEE Directive.
© 2009 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registered
trademarks of NETGEAR, Inc. in the United States and/or other countries. Other brand and product
names are trademarks or registered trademarks of their respective holders. Information is subject to
change without notice.
April 2009
cable connections are secure, that the IP address configuration of the PC is in the
same subnet as the switch, and click the
Discover
button.
3.
Click to select the line displaying the details of your switch. If there are multiple
switches in your network, be sure to select the one you want to configure.
4.
Click
Web Access
to view the switch log in screen.
5.
Enter the default password of
password
in lower case letters and click
Login
. The
switch will display the switch settings main page. Configure the switch for your
network. Consult the
Reference Manual
on the
Resource CD
or the online help in the
switch for assistance with configuration procedures.
After you log in to the switch, the main Web Access menu displays.
Use the configuration menu options to configure your switch.
Troubleshooting Tips
Here are some tips for correcting simple problems you may have.
•
Be sure to power on your PC and switch in the correct sequence.
Follow this sequence. Turn off the switch and computer. First, turn on the switch and
wait two minutes. Next, turn on the computer.
•
Make sure the Ethernet cables are securely plugged in.
For each powered on computer connected to the switch with a securely plugged in
Ethernet cable, the corresponding switch LAN port status light will be lit.
•
Make sure the network settings of the computer are correct.
In most cases, computers should be configured to obtain an IP address automatically
via DHCP. For help with this, refer to the
GS716T/GS724T Reference Manual
; a link
to the online
Reference Manual
is on the
Resource CD.
If your network uses static IP addresses, be sure the switch and computer are
configured with valid IP addresses.
Technical Support
Thank you for selecting NETGEAR products.
After completing the Smart Wizard configuration assistant, locate the serial number on the
bottom label of your product, and use it to register your product at
Registration is required before you can use our
telephone support service. Registration via our website is strongly recommended.
Go to
for product updates and Web support. For Warranty and
Regional Customer Support information, see the
Resource CD
that came with your
product.