Netgear GS716Tv3 Hardware Installation Guide - Page 9
Features, Per port LEDs, System LEDs.
View all Netgear GS716Tv3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
GS716T, GS724T and GS748T Gigabit Smart Switch Features • GS716Tv3/GS724Tv4 has 16/24 10/100/1000Mbps ethernet copper ports and 2 dedicated 1000Mbps fiber ports. • GS748Tv5 has 48 10/100/1000Mbps ethernet copper port, 2 Combo ports and 2 dedicated 1000Mbps fiber ports. • The following SFP types are supported: • 1000BASE-SX • 1000BASE-LX • 100BASE-FX (for combo ports on GS748T only) • The devices support full NETGEAR Smart Switch functionality. • The devices provide full compatibility with IEEE standards: • IEEE 802.3i, (10BASE-T) • IEEE 802.3u (100BASE-TX, 100BASE-FX) • IEEE 802.3x (Full-duplex flow control) • IEEE 802.3ab (1000BASE-T) • IEEE 802.3z (1000BASE-X) • Auto-sensing and auto-negotiating capabilities for all ports. • Auto Uplink™ on all ports to make the right connection. • Automatic address learning function to build the packet-forwarding information table. The table contains up to 16K Media Access Control (MAC) addresses. • Full-duplex and half-duplex functions for all 10/100/1000 Mbps ports. • Store-and-Forward transmission to remove bad packets from the network. • Full-duplex IEEE 802.3x pause frame flow control. • Active flow control to minimize packet loss/frame drops. • Half-duplex back-pressure control. • Per port LEDs, System LEDs. • Standard NETGEAR 7xx series chassis. • NETGEAR Green product series power-saving features: • Automatic power consumption adjustment based on the RJ-45 cable length. • Per port automatic power down when the port link is down. • Energy Efficient Ethernet (EEE), defined by IEEE 802.3az, supports operation in a Low Power Mode. 5