Netgear GS724TPS GS7xxTPS User Manual - Page 41
System > Management > Time > SNTP Server Configuration, SNTP Server 1, Delete, APPLY
UPC - 606449061086
View all Netgear GS724TPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
GS700TPS Smart Switch Software Administration Manual To configure SNTP servers: 1. Click System > Management > Time > SNTP Server Configuration. The SNTP Server Configuration screen displays: Figure 3-4 The SNTP Server Configuration screen contains the following fields: • SNTP Server 1 - Enter the primary SNTP server IP address. The Primary SNTP server is the first server used to retrieve the system time. • Delete - Removes the currently configured SNTP Server 1. • SNTP Server 2 - Enter the secondary SNTP server IP address. The Secondary SNTP server retrieves the system time if the Primary SNTP server becomes unavailable. • Delete - Removes the currently configured SNTP Server 2. 2. Enter the SNTP Server 1 and SNTP Server 2 in the provided fields. 3. Click APPLY to update the system settings. To remove SNTP servers: 1. Check the Delete box for each SNTP server that is to be removed. 2. Click APPLY to update the system settings. • Short-Reach State - Displays the Short-Reach mode on the interface. The possible field values are: - On - Indicates that the Short-Reach mode is enabled. - Off - Indicates that the Short-Reach mode is disabled. Managing System Settings 3-7 v1.0, June 2009