Netgear GS724Tv2 Shared access to the Internet for multiple VLANs - No routing - Page 3
Multi-Homing, extract from the DGFV338 Help Physical Setup, Logical Setup - firmware
View all Netgear GS724Tv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Multi-Homing (extract from the DGFV338 Help page) Network Configuration Secondary LAN IP Setup If you have computers using different IP networks in the LAN, (for example: 172.16.2.0, 10.0.0.0), then you can add "aliases" to the LAN port and give computers on those networks, access to the Internet. Available Secondary LAN IPs The tables lists the secondary LAN IP addresses added to the router. IP Address: The IP address alias added to the LAN port of the router. This is the gateway for computers that need to access the Internet. Subnet Mask: IPv4 Subnet Mask. Action/Edit: Click to make changes to the selected entry. Select All: Selects all the entries in the Available Secondary LAN IPs table. Delete: Deletes selected entries from the Available Secondary LAN IPs table. Add Secondary LAN IP Address To add a secondary LAN IP address, type in the IP Address and the Subnet Mask in the respective text fields and click Add. Note: Additional IP addresses cannot be configured in the DHCP server. The hosts on the secondary subnets must be manually configured with the IP addresses, gateway IP and DNS server IPs. IMPORTANT! Make sure the secondary IP addresses are different from the LAN, WAN, and any other subnet attached to this router. Example: ADSL IP address: 10.0.0.1 with subnet 255.0.0.0 WAN Ethernet IP address: 20.0.0.1 with subnet 255.0.0.0 LAN IP address: 192.168.1.1 with subnet 255.255.255.0 Secondary LAN IP: 192.168.20.1 with subnet 255.255.255.0 Physical Setup 1x GS724TS Prosafe Smartswitch - Firmware 3.1.0.1 2x Windows XP Computers (2 on each VLAN) 1 x DGFV338 Prosafe Firewall Router (Router firmware 3.4.0.19) Logical Setup GS724TS: Management IP on VLAN1 (192.168.0.239) DGFV338 : Primary range 192.168.0.1/24 (DHCP enabled) Seconday range 172.16.0.1/24 (DHCP not enabled) PC1 - VLAN20 - 192.168.0.2/24 PC2 - VLAN30 - 172.16.0.2/24 VLAN20: Ports 0/5 and 0/6 and 0/9 (PVID 20 for all the ports) VLAN30: Ports 0/7 and 0/8 and 0/9 (PVID 30 for all the ports) VLAN40: Port 0/5 - 0/9 (PVID 40 only for port 0/9)