Netgear GS728TPv2 User Manual
Netgear GS728TPv2 Manual
 |
View all Netgear GS728TPv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Netgear GS728TPv2 manual content summary:
- Netgear GS728TPv2 | User Manual - Page 1
User Manual 24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Models GS728TPv2, GS728TPPv2, GS752TPv2, and GS752TPP User Manual March 2020 202-12021-03 NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134, USA - Netgear GS728TPv2 | User Manual - Page 2
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Support and Community Visit netgear.com/support to get your questions answered and access the latest downloads. You can also check out our NETGEAR Community for helpful advice at community.netgear.com. Regulatory - Netgear GS728TPv2 | User Manual - Page 3
sections. - We updated the Auto-VoIP VLAN information. - We made many other minor changes and improvements. • We published the manual in a new format. • Changed Switch management options and default management mode. • Added Use the NETGEAR Switch Discovery Tool to discover the IP address of the - Netgear GS728TPv2 | User Manual - Page 4
default management mode 15 Manage the switch by using the local browser UI 16 Software Requirements to use the local browser UI 16 Supported 23 Use the NETGEAR Insight app to discover the IP address of the switch 25 Use the NETGEAR Switch Discovery Tool to discover the IP address of the switch - Netgear GS728TPv2 | User Manual - Page 5
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Fan LED in the Device View 46 PoE Max LED in the Device View 46 LED Mode LED in the Device View 47 Configure interface settings 47 Access the NETGEAR support website 52 Access the user manual online 53 - Netgear GS728TPv2 | User Manual - Page 6
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Configure SNMPv1 and SNMPv2 trap settings 109 Configure SNMPv1 and SNMPv2 trap flags 112 View the supported MIBs 113 Configure SNMPv3 users 114 Configure Link Layer Discovery Protocol 116 Configure LLDP - Netgear GS728TPv2 | User Manual - Page 7
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Configure the PVID settings 177 Configure a MAC-based VLAN 180 Configure protocol-based VLAN groups 182 Configure protocol-based VLAN group membership 184 Configure a voice VLAN 185 Configure GARP switch - Netgear GS728TPv2 | User Manual - Page 8
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Configure the MLD snooping querier VLAN settings 248 Configure multicast VLAN registration 250 Configure the global MVR settings 251 Configure an MVR group 252 Configure MVR group membership 253 Configure the - Netgear GS728TPv2 | User Manual - Page 9
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Manage Class of Service queues 316 Manage Differentiated Services 318 Defining DiffServ service interface 339 View DiffServ service statistic 343 Chapter 6 Manage Device Security Change the local device password - Netgear GS728TPv2 | User Manual - Page 10
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Manage port authentication on individual ports 385 View the port summary 389 View the client summary 391 Set up traffic control 392 Manage MAC filtering 392 Configure storm control settings 397 Manage port - Netgear GS728TPv2 | User Manual - Page 11
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Use HTTP to export a file from the switch to a computer 501 Export a file from the switch to a USB device 502 Download a file to the switch or update the software 503 Use TFTP to download a file to the switch - Netgear GS728TPv2 | User Manual - Page 12
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Quality of service settings 558 Security settings 558 System management settings 559 Settings for other features 559 Hardware technical specifications 560 12 User Manual - Netgear GS728TPv2 | User Manual - Page 13
of 380W. • GS752TPv2. NETGEAR 48-Port Gigabit PoE+ Smart Managed Pro Switch With 4 SFP Ports. This model provides a PoE power budget of 380W. • GS752TPP. NETGEAR 48-Port Gigabit PoE+ Smart Managed Pro Switch With 4 SFP Ports. This model provides a PoE power budget of 760W. The manual describes the - Netgear GS728TPv2 | User Manual - Page 14
and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Note: In this manual, we refer to all switch models as the switch. Unless noted otherwise, all information applies to all switch models. Note: For more information about the topics covered in this manual, visit the support - Netgear GS728TPv2 | User Manual - Page 15
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Switch management options and default management mode If you prefer, you can use the switch as a plug-and-play device, so you do not need to set up a custom configuration. - Netgear GS728TPv2 | User Manual - Page 16
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Manage the switch by using the local browser UI This manual describes how to use the local browser UI to manage and monitor the switch. For information about using the NETGEAR Insight app and Insight Cloud portal - Netgear GS728TPv2 | User Manual - Page 17
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Navigation tab Configuration menu Language menu Logout button Page help Button Page menu Configuration status and to reveal multiple submenu links, as the following figure shows. Get Started 17 User Manual - Netgear GS728TPv2 | User Manual - Page 18
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Link Submenu links Figure 2. Switch page take effect immediately. Clicking the Cancel button cancels the configuration on the page and resets the data on the page to the previous values of the switch. Clicking the - Netgear GS728TPv2 | User Manual - Page 19
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Table 1. Command buttons the switch. The online help pages are context sensitive. For example, if the IP Configuration page is open, the help topic for that page displays if you click the Started 19 User Manual - Netgear GS728TPv2 | User Manual - Page 20
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports NETGEAR is enabled by default, allowing a DHCP server or router on the network to assign an IP address to the NETGEAR Switch Discovery Tool to discover the IP address of the switch on page 26. • NETGEAR Smart Control - Netgear GS728TPv2 | User Manual - Page 21
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports When you know the IP manual, which you can download from netgear.com/support/product/SCC. • NETGEAR Insight app and Insight Cloud portal. You can change the management mode of the switch so that you can use the NETGEAR - Netgear GS728TPv2 | User Manual - Page 22
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 9. If your browser displays a security message and does not let you proceed, do one of the following, depending on the browser that you are using: • - Netgear GS728TPv2 | User Manual - Page 23
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Note: After you add the switch to an Insight network location, the Insight network password replaces the switch local device password. For information about the credentials, see Credentials for the local browser - Netgear GS728TPv2 | User Manual - Page 24
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 10. If your browser displays a security message and does not let you proceed, do one of the following, depending on the browser that you are - Netgear GS728TPv2 | User Manual - Page 25
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Note: After you add the switch to an Insight network location, the Insight network password replaces the switch local device password. For information about the credentials, see Credentials for the local browser UI - Netgear GS728TPv2 | User Manual - Page 26
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 5. Enter the email address and password for your account and tap LOG IN. After you log in to your account, the IP address of the switch displays in the device list. 6. Write down the IP address for future use. You - Netgear GS728TPv2 | User Manual - Page 27
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports To open the program, double-click the NETGEAR Switch Discovery Tool icon on your desktop. The initial page displays a menu and a button. 8. From the Choose a connection menu, select the network connection that - Netgear GS728TPv2 | User Manual - Page 28
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 6. Write down the switch IP address assigned by the DHCP server. For information about how to access the local browser UI of the switch, see Access the switch on-network when you know the switch IP address on page - Netgear GS728TPv2 | User Manual - Page 29
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Note: If you connect your computer directly to the switch using an Ethernet cable, the IP address settings of your computer do not need to be in the same IP subnet as the switch. The SCC can detect the IP address - Netgear GS728TPv2 | User Manual - Page 30
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports browser, enter the IP address of the switch. The page that displays depends on whether you logged in before. NETGEAR provides enhanced security password and click the Update Setting button. Get Started 30 User Manual - Netgear GS728TPv2 | User Manual - Page 31
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports • Mozilla Firefox. If Mozilla Firefox displays a Your connection is not secure message, click the ADVANCED button. Then, click the Add Exception button. In the pop- - Netgear GS728TPv2 | User Manual - Page 32
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Access the switch off- NETGEAR. • Get a registration key. For more information about these registration options, see Register the switch on page 35. The default IP address of the switch is 192.168.0.239. The IP - Netgear GS728TPv2 | User Manual - Page 33
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Note: NETGEAR provides enhanced password. Enter the local device password. The default local device password is password. The first time that you enter the default local device password, the Change Default Password - Netgear GS728TPv2 | User Manual - Page 34
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports • Registration key. If you obtained a registration key, enter it. For more information, see Register the switch with your NETGEAR account and get a registration key for offline access on page 38). For information - Netgear GS728TPv2 | User Manual - Page 35
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports you are then required to customize the password for increased security. Subsequent times that you log in to the local browser UI, use your customized local device password. • NETGEAR Insight network location password - Netgear GS728TPv2 | User Manual - Page 36
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports You can use one the following . For more information, visit netgear.com/support, and see the knowledge base articles about NETGEAR Insight. Register the switch with your NETGEAR account and access the switch - Netgear GS728TPv2 | User Manual - Page 37
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports password and click the Update NETGEAR email address and password. For information about the credentials, see Credentials for the local browser UI on page 34. 6. Click the Login button. 7. If the Change Default Password - Netgear GS728TPv2 | User Manual - Page 38
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Register the switch with your NETGEAR account and get a registration key for offline access After you register your switch with NETGEAR, you can get a registration key, access the switch offline or not connected to - Netgear GS728TPv2 | User Manual - Page 39
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Note: If you already disabled the DHCP client and assigned a static IP address to the switch, change the IP settings of your computer to be in the same subnet as the static IP and password and click the Update Setting - Netgear GS728TPv2 | User Manual - Page 40
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports • Microsoft Edge. If Microsoft Edge displays a There is a problem with this website's security certificate message or a similar warning, select Details > Go on to the webpage. Note: For information about - Netgear GS728TPv2 | User Manual - Page 41
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports • If you previously managed the switch through the Insight app or Cloud portal, enter the Insight network password for the last Insight network location. For information about the credentials, see Credentials for - Netgear GS728TPv2 | User Manual - Page 42
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports • Changing back to Directly Connect to Web Browser Interface mode. - The NETGEAR Insight Mobile App and Insight Cloud Portal management mode is disabled and the current Insight-manageable device settings are saved - Netgear GS728TPv2 | User Manual - Page 43
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. Read the text, and click the OK button. The pop-up window closes. 8. Click the Apply button. Another pop-up window opens. 9. Click the OK - Netgear GS728TPv2 | User Manual - Page 44
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 4. Enter one of the following passwords: • After initial login, enter your local device password. By default, the local device password is password. You must change this password browser. Get Started 44 User Manual - Netgear GS728TPv2 | User Manual - Page 45
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Access the switch on-network and connected to the Internet on page 20 or Access - Netgear GS728TPv2 | User Manual - Page 46
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports You can select a menu option to access the page that contains the configuration or monitoring options. 8. To display the main menu, right-click the switch graphic but do not right-click a specific port. The menu - Netgear GS728TPv2 | User Manual - Page 47
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Note: The physical PoE Max LED on the switch can also blink yellow, indicating that at least once during the previous two minutes, less than 7W of PoE power was available. LED Mode LED in the Device View The LED - Netgear GS728TPv2 | User Manual - Page 48
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports For some features that allow you to configure interface settings, you can apply the same settings simultaneously to any of the following: • A single port • Multiple ports • All ports row. Get Started 48 User Manual - Netgear GS728TPv2 | User Manual - Page 49
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 4. Configure the desired settings. 5. Click the Apply button. Your settings are saved. To configure a single LAG is highlighted, and the interface number appears in the heading row. Get Started 49 User Manual - Netgear GS728TPv2 | User Manual - Page 50
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 3. Configure the desired settings. 4. Click the Apply button. Your settings are saved. To configure multiple ports: 1. Ensure that the page is displaying all ports, and not only the LAGs. 2. Select the check box - Netgear GS728TPv2 | User Manual - Page 51
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 3. Configure the desired settings. 4. Click the Apply button. Your settings are saved. To configure all LAGs: 1. Click the LAG link to display only the LAG - Netgear GS728TPv2 | User Manual - Page 52
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Access the NETGEAR support website From the local browser UI, you can access the NETGEAR support website at netgear.com/support. To access the support website from the local browser UI: 1. Connect your computer to - Netgear GS728TPv2 | User Manual - Page 53
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Access the user manual online The user manual (the guide you are now reading) is available at the NETGEAR download center at netgear.com/support/download/. To access the user manual online from the local browser UI - Netgear GS728TPv2 | User Manual - Page 54
• Configure the IP network settings for management access • Configure the time settings • Configure denial of service settings • Configure DNS SNMP • Configure Link Layer Discovery Protocol • Configure a DHCP L2 relay • Configure DHCP snooping • Configure Dynamic ARP Inspection • Set up PoE - Netgear GS728TPv2 | User Manual - Page 55
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports View or define system information When you log in, the System Information page displays. You can configure and view general device information. To view or - Netgear GS728TPv2 | User Manual - Page 56
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 6. Define the following fields: • System Name. Enter the name to identify this switch. You can use up to 255 alphanumeric characters. The default address of the switch. Configure System Information 56 User Manual - Netgear GS728TPv2 | User Manual - Page 57
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports View the fan status You can view the status of the fans in all units. These fans remove the heat generated by the power, CPU, - Netgear GS728TPv2 | User Manual - Page 58
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Table 6. Fan status (continued) Field Type Speed Duty level(%) State Description Specifies whether the fan module is fixed or removable. The fan speed. The duty level of the fan. Specifies whether the fan is - Netgear GS728TPv2 | User Manual - Page 59
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. To refresh the page, click the Refresh button. The following table describes the nonconfigurable Power supplies information. Table 7. Power supplies status Field Power supply Description - Netgear GS728TPv2 | User Manual - Page 60
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. To refresh the page, click the Refresh button. The following table describes the nonconfigurable information displayed in the Versions section of the System Information page. - Netgear GS728TPv2 | User Manual - Page 61
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The System Information , trigger a notification. The notification occurs through SNMP trap and syslog messages. To configure the CPU enter the IP address of the switch. Configure System Information 61 User - Netgear GS728TPv2 | User Manual - Page 62
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports If you do not know the IP address of the switch, see Access the switch on-network and connected to the Internet on page 20 or Access the switch off-network on - Netgear GS728TPv2 | User Manual - Page 63
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports • Falling Interval. The utilization monitoring time period can be configured from 5 seconds to 86400 seconds in multiples of 5 seconds. • Free Memory Threshold. The free memory - Netgear GS728TPv2 | User Manual - Page 64
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The Device Status field displays the current status of the device. The status is one of the following: modification time of the file stored in the USB flash drive. Configure System Information 64 User Manual - Netgear GS728TPv2 | User Manual - Page 65
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Configure the IP network settings for management access You can configure network information for the local browser UI, which is the logical interface used for in-band connectivity - Netgear GS728TPv2 | User Manual - Page 66
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 6. Select the appropriate radio button to determine how to configure the network information for the switch management interface: • Dynamic IP Address (DHCP). Specifies that the switch must obtain the IP address - Netgear GS728TPv2 | User Manual - Page 67
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 9. Click the Apply button. Your settings are saved. Configure the IPv6 network settings for the local browser interface You can configure IPv6 network information for - Netgear GS728TPv2 | User Manual - Page 68
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports auto-configuration features to acquire an IPv6 address. Auto- the IPv6 Gateway field, specify the default gateway for the IPv6 network interface. IP address of the switch. Configure System Information 68 User - Netgear GS728TPv2 | User Manual - Page 69
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports If you do not know the IP address of the switch, see Access the switch on-network and connected to the Internet on page 20 or Access the switch off-network on - Netgear GS728TPv2 | User Manual - Page 70
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Configure the time settings The switch supports the Simple Network Time Protocol (SNTP). As its name suggests, it is a less complicated version of Network Time Protocol, which is a system for synchronizing the - Netgear GS728TPv2 | User Manual - Page 71
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. Select the Clock Source time zone is different from UTC. The allowed range is 0 to 59. The default value is 0. 13. Click the Apply button. Your settings are saved. Configure System Information 71 User Manual - Netgear GS728TPv2 | User Manual - Page 72
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Access the switch on-network and connected to the Internet on page 20 or Access - Netgear GS728TPv2 | User Manual - Page 73
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The page refreshes and displays the SNTP Global Configuration section, the SNTP Global Status section, and the SNTP GLobal Status section. You can set the - Netgear GS728TPv2 | User Manual - Page 74
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 14. In the Unicast Poll Interval field, specify the number of seconds between unicast poll requests expressed as a power of 2. to The allowed range is 6 to 10. The default value is 6. 15. In the Broadcast Poll - Netgear GS728TPv2 | User Manual - Page 75
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports For information about the credentials, see Status information Field Version Supported mode Last Update Time Last Attempt Time Last Attempt Status Server IP Address Address Type Server Information 75 User Manual - Netgear GS728TPv2 | User Manual - Page 76
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports as an SNTP client and cannot provide time services to other systems. Time sources are established by is used for polling a server for which the IP address is known. SNTP servers that were configured on Manual - Netgear GS728TPv2 | User Manual - Page 77
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The device retrieves synchronization information, either by actively requesting information or at every poll interval. You can view and modify information for adding and modifying - Netgear GS728TPv2 | User Manual - Page 78
and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. From the Server Type menu, select the type of SNTP address to enter in the address field. The address can be either an IPv4 address or host name (DNS). The default value is IPv4. 8. In the Address field, specify the IP - Netgear GS728TPv2 | User Manual - Page 79
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Table 14. SNTP Server Status information (continued) Field Last Attempt Status Requests Failed Requests Description The status of the last SNTP request or unsolicited message - Netgear GS728TPv2 | User Manual - Page 80
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The System Information page displays. 6. Select System > Management > Time > SNTP Server Configuration. The SNTP Server Configuration page displays. 7. Select the check box next to the - Netgear GS728TPv2 | User Manual - Page 81
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Configure daylight saving time settings You can configure settings for summer time, which is also known as daylight saving time. Used in some countries around - Netgear GS728TPv2 | User Manual - Page 82
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. Select a Daylight Saving (DST) radio button: • Disable. Disable daylight saving time. • Recurring. Daylight saving time occurs at the same time every year. The start and - Netgear GS728TPv2 | User Manual - Page 83
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Table 15. Daylight saving setting is Recurring, Recurring EU, or Recurring USA (continued) Field Description to a switch that is off-network using an Ethernet cable. Configure System Information 83 User Manual - Netgear GS728TPv2 | User Manual - Page 84
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Access the switch on-network and connected to the - Netgear GS728TPv2 | User Manual - Page 85
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The following table service settings You can configure the Denial of Service (DoS) settings for the switch. The switch provides support for classifying and blocking specific types of DoS attacks. Configure Auto - Netgear GS728TPv2 | User Manual - Page 86
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The Local Device Login page displays. If you did not yet register the switch with your NETGEAR account, the Register to unlock all features page displays. For more information, see Register the switch on page 35. - Netgear GS728TPv2 | User Manual - Page 87
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 4. Enter one of the following passwords: • After initial login, enter your local device password. By default, the local device password is password. You must change this password at initial login. • If you - Netgear GS728TPv2 | User Manual - Page 88
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports • Denial of Service Max ICMP Packet Size. Specify the maximum allowed ICMP packet size. If you select the Denial of Service ICMPv4 Enable radio button or the Denial of Service ICMPv6 Enable radio button, the - Netgear GS728TPv2 | User Manual - Page 89
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports • Denial of Service TCP Port. Enabling TCP Port DoS prevention causes the switch to drop packets with a TCP source port that is equal to the TCP destination port. By default, this option is disabled. • Denial of - Netgear GS728TPv2 | User Manual - Page 90
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports • If you previously managed the switch through the Insight app or Cloud portal, enter the Insight network password default domain name is netgear.com and the user enters test, then test is changed to test.netgear Manual - Netgear GS728TPv2 | User Manual - Page 91
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 12. Click the Apply button. Your settings are saved. 13. To refresh the page, click the Refresh button. The following table displays DNS Server Configuration - Netgear GS728TPv2 | User Manual - Page 92
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. In the DNS Server Configuration table, select the check box for the DNS server. Note: If you do not select a DNS server, all the DNS - Netgear GS728TPv2 | User Manual - Page 93
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. In the Host Name (1 to 255 characters) field, specify the static host name to add. Its length cannot exceed 255 characters and it is a required field. 8. In the IPv4/IPv6 Address field, enter the IP address to - Netgear GS728TPv2 | User Manual - Page 94
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 6. Select System > Management > DNS > Host Configuration. The DNS Host Configuration page displays. 7. Select the check box next to the entry to remove. 8. Click the Delete button. Change the host name or IP - Netgear GS728TPv2 | User Manual - Page 95
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 10. To clear all the dynamic host name entries from the list, click the Clear button. The dynamic host mapping table shows host name-to-IP address entries that the switch learned. The following table describes the - Netgear GS728TPv2 | User Manual - Page 96
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Auto Power Down Mode Disable or Enable radio button. By default, this mode is disabled. When a port link of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see - Netgear GS728TPv2 | User Manual - Page 97
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports If you did not yet register the switch with your NETGEAR account, the Register to unlock all features page displays. For more information, see Register the switch on page 35. 4. Enter one of the following passwords - Netgear GS728TPv2 | User Manual - Page 98
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Use the Device View For information about the device view, see Use the Device View of the local browser UI on page 44. Configure Power over Ethernet You can configure the global Power over Ethernet (PoE) - Netgear GS728TPv2 | User Manual - Page 99
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports supports these standards. PoE and PoE+ let you power such devices without the need for a separate power supply. The switch supports By default, power is supplied in ascending port order (that is, lower port numbers - Netgear GS728TPv2 | User Manual - Page 100
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports However, the PDs consume less power than defined by their classes: The PD attached to Port 1 consumes 7.3W, the PD attached to Port 2 consumes 4.7W, and the PD attached to Port 3 consumes 8.9W. So even though the - Netgear GS728TPv2 | User Manual - Page 101
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Configure the global PoE settings To configure the global PoE settings: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, - Netgear GS728TPv2 | User Manual - Page 102
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 9. To active the PoE traps, from the Traps menu, select Enable. Selecting Disable deactivates the PoE traps. The default setting is Enabled. 10. Click the Apply button. Your settings are saved. The following table - Netgear GS728TPv2 | User Manual - Page 103
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports • If you previously managed the switch through the Insight app or Cloud portal, enter the Insight network password for the last Insight network location. For information about the credentials, see Credentials for - Netgear GS728TPv2 | User Manual - Page 104
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports • Legacy. The port is powered using high-inrush current, which is used by legacy PDs that require more than 15W to power up. • Pre-802.3at. The port is initially powered in the IEEE 802.3af mode and, before 75 msec - Netgear GS728TPv2 | User Manual - Page 105
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The following table describes the nonconfigurable fields on the page. Table 23. PoE Port Configuration Field High Power Max Power (mW) Class Output Voltage (Volts) Output Current (mA) Output Power (W) Status - Netgear GS728TPv2 | User Manual - Page 106
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Configure SNMP You can configure SNMP settings for SNMPv1/v2 and SNMPv3. The switch software supports the configuration of SNMP groups and users that can manage traps that the SNMP agent generates. The switch - Netgear GS728TPv2 | User Manual - Page 107
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The System Information page displays. 6. Select System > SNMP > SNMP V1/V2 > Community Configuration. 7. In the Management Station IP field, specify the IP existing SNMP community To modify an existing SNMP community: - Netgear GS728TPv2 | User Manual - Page 108
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The Local Device Login page displays. If you did not yet register the switch with your NETGEAR account, the Register to unlock all features page displays. For more information, see Register the switch on page 35. - Netgear GS728TPv2 | User Manual - Page 109
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports • If you previously managed the switch through the Insight app or Cloud portal, enter the Insight network password for the last Insight network location. For information about the credentials, see Credentials for - Netgear GS728TPv2 | User Manual - Page 110
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports For information about the credentials, see Credentials for the local browser UI on page 34. 5. Click the Login button. The System Information page displays. 6. Select System > SNMP > SNMP V1/V2 > Trap Configuration - Netgear GS728TPv2 | User Manual - Page 111
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 4. Enter one of the following passwords: • After initial login, enter your local device password. By default, the local device password is password. You must change this password at initial login. • If you - Netgear GS728TPv2 | User Manual - Page 112
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports For information about the credentials, see Credentials for the local browser UI on page 34. 5. Click the Login button. The System Information page displays. 6. Select System > SNMP > SNMP V1/V2 > Trap - Netgear GS728TPv2 | User Manual - Page 113
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 6. Select System > SNMP > SNMP V1/V2 > Trap Flags. 7. Enable or disable the following system traps: • Authentication. When enabled, SNMP traps are sent when events involving authentication occur, such as when a - Netgear GS728TPv2 | User Manual - Page 114
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports By default, the local device password is password. You must change this password at initial login. • If you previously managed the switch through the Insight app or Cloud portal, enter the Insight network password - Netgear GS728TPv2 | User Manual - Page 115
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports If you do not know the IP address of the switch, see Access the switch on-network and connected to the Internet on page 20 or Access the switch off-network on - Netgear GS728TPv2 | User Manual - Page 116
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Configure Link Layer Discovery Protocol The IEEE 802.1AB-defined standard, Link Layer Discovery Protocol (LLDP), allows stations on an 802 LAN to advertise major - Netgear GS728TPv2 | User Manual - Page 117
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports By default, the local device password is password. You must change this password at initial login. • If you previously managed the switch through the Insight app or Cloud portal, enter the Insight network password - Netgear GS728TPv2 | User Manual - Page 118
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Configure LLDP port settings You can specify LLDP settings for a port. To configure LLDP settings for a port: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to - Netgear GS728TPv2 | User Manual - Page 119
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. Select one or more interfaces by taking one of the following actions: • To configure a single interface, select the check box associated with the port, or type the port number in the Go To Interface field and - Netgear GS728TPv2 | User Manual - Page 120
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports View the LLDP-MED network policy You can display information about the LLPD-MED network policy TLV transmitted in the LLDP frames on the selected - Netgear GS728TPv2 | User Manual - Page 121
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The following table describes the LLDP-MED network policy information that displays on the page. Table 25. LLDP-MED network policy information Field Network Policy Number Application VLAN ID VLAN Type User - Netgear GS728TPv2 | User Manual - Page 122
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports By default, the local device password is password. You must change this password at initial login. • If you previously managed the switch through the Insight app or Cloud portal, enter the Insight network password - Netgear GS728TPv2 | User Manual - Page 123
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The Local Device Login page displays. If you did not yet register the switch with your NETGEAR account, the Register to unlock all features page displays. For more information, see Register the switch on page 35. - Netgear GS728TPv2 | User Manual - Page 124
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Field Description Port ID The port number. Port Description The user-defined description of the port. For information about how to configure the port description, see Configure the port settings and maximum - Netgear GS728TPv2 | User Manual - Page 125
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Field VLAN Type User Priority DSCP Description Specifies whether the VLAN associated with the policy is tagged or untagged. The priority associated with the policy. The DSCP associated with a particular policy - Netgear GS728TPv2 | User Manual - Page 126
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Port Chassis ID Subtype Chassis ID Port ID Subtype Port ID System Name Description The Media Service data displayed in the remote system's Port ID field. The physical address of the port on the remote system from which - Netgear GS728TPv2 | User Manual - Page 127
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Field Description Chassis ID Subtype The type of data displayed in the Chassis ID field on the remote system. Chassis ID The remote 802 LAN device's chassis. Port ID Subtype The type of data displayed in - Netgear GS728TPv2 | User Manual - Page 128
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Field Hardware Revision Firmware Revision Software Revision Serial Number Model Name Asset ID Location Information Civic Coordinates ECS ELIN Unknown Network Policies Application Type VLAN ID VLAN Call Service (ECS - Netgear GS728TPv2 | User Manual - Page 129
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports as Layer 3 relay agent. In some network configurations, Layer 2 (L2) devices must append the Relay Agent Information option because they are closer to the end - Netgear GS728TPv2 | User Manual - Page 130
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. Select the Enable radio button The default admin mode is disabled. 8. Click the Apply button. Your settings are saved. Configure a DHCP L2 relay interface You can configure a DHCP L2 relay interface. To - Netgear GS728TPv2 | User Manual - Page 131
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports For information about the credentials, see Credentials for the local browser UI on page 34. 5. Click the Login button. The System Information page displays. 6. Select System> Services interface. The default is Disable - Netgear GS728TPv2 | User Manual - Page 132
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports View DHCP L2 relay interface statistics You can view DHCP L2 relay interface statistics. To view DHCP L2 relay interface statistics: 1. Connect your computer to - Netgear GS728TPv2 | User Manual - Page 133
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports • VLAN. Only VLANs are displayed. • LAG. Only LAGs are displayed. • All. Physical interfaces, VLANs the Clear button to reset the statistics. Configure DHCP , IP address, lease time, binding type, VLAN number Manual - Netgear GS728TPv2 | User Manual - Page 134
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Configure the global DHCP snooping settings You can view and configure the global settings for DHCP snooping. To configure the global DHCP snooping settings: 1. Connect - Netgear GS728TPv2 | User Manual - Page 135
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 8. To enable the verification of the sender's MAC address for DHCP snooping, select the MAC Address Validation Enable radio button. When MAC address validation is - Netgear GS728TPv2 | User Manual - Page 136
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Configure DHCP snooping interface settings You can view and configure each port as a trusted or untrusted port. Any DHCP responses received on a trusted port are forwarded. If a port is configured as untrusted, any - Netgear GS728TPv2 | User Manual - Page 137
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports • LAG. Only LAGs are displayed. • All. Both physical interfaces and LAGs are displayed. 8. Select one N/A. 13. Click the Apply button. Your settings are saved. Configure System Information 137 User Manual - Netgear GS728TPv2 | User Manual - Page 138
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Configure static DHCP bindings You can view, add, and remove static bindings in the DHCP snooping bindings database and to view or clear the dynamic - Netgear GS728TPv2 | User Manual - Page 139
and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 8. In the MAC Address field, specify the MAC address for the binding to be added. This is the key to the binding database. 9. From the VLAN ID menu, select the ID of the VLAN the client is authorized to use. 10. In the IP - Netgear GS728TPv2 | User Manual - Page 140
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 4. Enter one of the following passwords: • After initial login, enter your local device password. By default, the local device password is password. You must change this password : a. Specify the IP address of the TFTP - Netgear GS728TPv2 | User Manual - Page 141
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports View or clear DHCP snooping statistics You can view and clear per-interface statistics about the DHCP messages filtered by the DHCP snooping feature on - Netgear GS728TPv2 | User Manual - Page 142
and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. Select whether to display physical interfaces, LAGs, or both by clicking one of the following links above the table heading: • 1 (the unit ID of the switch). Only physical interfaces are displayed. This is the default - Netgear GS728TPv2 | User Manual - Page 143
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports the ARP packet equals the destination MAC address. This check applies only to ARP responses, since the target MAC address is unspecified in ARP requests. You can also enable IP address checking. When this option is - Netgear GS728TPv2 | User Manual - Page 144
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. Select the Validate Source MAC Enable radio button. 8. Select the Validate Destination MAC Enable radio button. 9. Select the Validate IP Enable radio button. 10. Click the Apply button. Your settings are saved - Netgear GS728TPv2 | User Manual - Page 145
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports • If you previously managed the switch through the Insight app or Cloud portal, enter the Insight network password VLAN. • Select Disable to disable dynamic ARP inspection logging for the selected VLAN. The default - Netgear GS728TPv2 | User Manual - Page 146
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Configure DAI on an interface To configure DAI on LAG1 as a trusted port and rate limiting for ports 1-10: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to - Netgear GS728TPv2 | User Manual - Page 147
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports rate limit range is 0-300. The default is 15 packets per second (pps). IP address to a MAC address on a VLAN. When hosts use static IP enabled on a VLAN, DAI consults and associate it with VLAN 100: 1. Connect your computer - Netgear GS728TPv2 | User Manual - Page 148
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports If you do not know the IP address of the switch, see Access the switch on-network and connected to the Internet on page 20 or Access the switch off-network on - Netgear GS728TPv2 | User Manual - Page 149
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 11. In the Source IP Address field, specify the IP address of a host. 12. In the Source MAC Address field, specify the MAC address of the host that is statically mapped to the IP address specified in the Source IP - Netgear GS728TPv2 | User Manual - Page 150
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports View DAI Statistics per VLAN To view DAI statistics per VLAN: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or - Netgear GS728TPv2 | User Manual - Page 151
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Field Description ACL Permits The number of ARP packets that were permitted by DAI because a matching ARP ACL rule was found for this VLAN. Bad Source MAC The number of ARP packets that were dropped by DAI as - Netgear GS728TPv2 | User Manual - Page 152
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Access the switch on-network and connected to the - Netgear GS728TPv2 | User Manual - Page 153
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The Local Device Login page displays. If you did not yet register the switch with your NETGEAR account, the Register to unlock all features page displays. For more information, see Register the switch on page 35. - Netgear GS728TPv2 | User Manual - Page 154
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Specify the settings for a recurring PoE timer schedule A recurring schedule allows you to set up a single schedule that starts at a particular date and that recurs either with a specific end date or - Netgear GS728TPv2 | User Manual - Page 155
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The fields in the Timer Schedule Configuration section might adjust to let you configure a timer schedule with Add button. The entry for the timer schedule is added. Configure System Information 155 User Manual - Netgear GS728TPv2 | User Manual - Page 156
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Change the settings for a recurring PoE timer schedule entry You can change the settings for an existing recurring PoE timer schedule entry. (You cannot do this for an existing absolute PoE timer schedule.) To - Netgear GS728TPv2 | User Manual - Page 157
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Delete a PoE timer schedule entry You can delete a PoE timer schedule entry that you no longer need. To delete a PoE timer schedule entry: 1. Connect your computer to the same network as the switch. You can use a - Netgear GS728TPv2 | User Manual - Page 158
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Delete a PoE timer schedule You can delete a PoE timer schedule that you no longer need. All entries that are part of the PoE timer schedule are also deleted. To delete a PoE timer schedule: 1. Connect your - Netgear GS728TPv2 | User Manual - Page 159
3 3Configure Switching This chapter contains the following sections: • Configure the port settings and maximum frame size • Configure link aggregation groups • Configure VLANs • Configure Auto-VoIP • Configure Spanning Tree Protocol • Configure multicast • Manage IGMP snooping • Manage MLD snooping - Netgear GS728TPv2 | User Manual - Page 160
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Configure the port settings and maximum frame size You can view, configure, and monitor the physical port information for the ports (that is, the physical interfaces) on the switch. To configure the port settings - Netgear GS728TPv2 | User Manual - Page 161
and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. Select whether to display physical interfaces, LAGs, or both by clicking one of the following links above the table heading: • 1 (the unit ID of the switch). Only physical interfaces are displayed. This is the default - Netgear GS728TPv2 | User Manual - Page 162
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Possible field values are as follows: • Auto. All supported speeds. • 10. 10 Mbits/second • 100. 100 Mbits/second The delimiter characters for setting different speed values are a comma (,), a period (.) and a - Netgear GS728TPv2 | User Manual - Page 163
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 17. Click the Apply button. Your settings are saved. The following table describes the nonconfigurable data that is displayed. Table 28. Port Configuration information Field Port Type Physical Status Link Status - Netgear GS728TPv2 | User Manual - Page 164
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports To configure LAG settings: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer - Netgear GS728TPv2 | User Manual - Page 165
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 10. From the Hash Mode menu, select the load-balancing mode for a port channel (LAG): • 1 Src/Dest MAC, incoming port. This mode uses the source and destination MAC addresses and incoming port manually. The default - Netgear GS728TPv2 | User Manual - Page 166
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Configure LAG membership You can select two or more full-duplex Ethernet links to be aggregated together to form a link aggregation group (LAG), which is also known as a port channel. The switch can treat the port - Netgear GS728TPv2 | User Manual - Page 167
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports You can enter any string of up to 15 alphanumeric characters. A valid name must be specified for you to create the LAG. 9. In the Ports table, click each port that you want to include as a member of the selected - Netgear GS728TPv2 | User Manual - Page 168
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. In the LACP System Priority field, specify the device's link aggregation priority relative to the devices at the other ends of the links on which - Netgear GS728TPv2 | User Manual - Page 169
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports For information about the credentials, see Credentials for the local browser UI on page 34. 5. Click the Login button. The System Information page displays. 6. Select Switching> LAG > Advanced > LACP Port - Netgear GS728TPv2 | User Manual - Page 170
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports By default, all ports on the switch are in the same broadcast domain. VLANs electronically separate ports on the same switch into separate broadcast domains so that broadcast packets are not sent to all the ports - Netgear GS728TPv2 | User Manual - Page 171
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports • If you previously managed the switch through the Insight app or Cloud portal, enter the Insight network password for the last Insight network location. For information about the credentials, see Credentials for - Netgear GS728TPv2 | User Manual - Page 172
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Delete a VLAN To delete a VLAN from the switch: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to - Netgear GS728TPv2 | User Manual - Page 173
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Reset the VLAN configuration on the switch to the default settings If you reset the VLAN configuration on the switch to the default settings, all VLANs that you added are deleted. (The predefined VLANS are not - Netgear GS728TPv2 | User Manual - Page 174
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 8. Click the Apply button. Your settings are saved. Your settings are saved. Except for the predefined default VLANs, all VLANs are deleted. Configure VLAN membership To configure VLAN membership: 1. Connect your - Netgear GS728TPv2 | User Manual - Page 175
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. In the VLAN ID menu, select the VLAN ID. 8. In the Group Operation menu, select one of the following options, which applies to all ports in the VLAN: • Untag All. For all ports that are members of the VLAN, - Netgear GS728TPv2 | User Manual - Page 176
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Your settings are saved. The following table describes the nonconfigurable information displayed on the page. Table 30. Advanced VLAN membership Field VLAN Name VLAN Type Definition The name for the VLAN that - Netgear GS728TPv2 | User Manual - Page 177
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 5. Click the Login button. The System Information page displays. 6. Select Switching > VLAN > Advanced > VLAN Status. The following table describes the nonconfigurable information displayed on the page. Table 31. - Netgear GS728TPv2 | User Manual - Page 178
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports To configure the PVID settings: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your - Netgear GS728TPv2 | User Manual - Page 179
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports You can select multiple interfaces. To select all the interfaces, select the Interface check box in the heading row. 10. In the PVID field, specify the VLAN ID to assign to untagged or priority-tagged frames - Netgear GS728TPv2 | User Manual - Page 180
-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Table 32. Nonconfigurable fields on the PVID Configuration page (continued) Field Tagged VLANs Forbidden VLANs Dynamic VLANs Description The number of tagged VLANs for the interface. The number of forbidden VLANs - Netgear GS728TPv2 | User Manual - Page 181
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports • If you previously managed the switch through the Insight app or Cloud portal, enter the Insight network password for the last Insight network location. For information about the credentials, see Credentials for - Netgear GS728TPv2 | User Manual - Page 182
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports For information about the credentials, see Credentials for the local browser UI on page 34. 5. Click the Login button. The System Information page displays. 6. Select Switching> VLAN > Advanced > MAC Based VLAN. - Netgear GS728TPv2 | User Manual - Page 183
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports If you did not yet register the switch with your NETGEAR account, the Register to unlock all features page displays. For more information, see Register the switch on page 35. 4. Enter one of the following passwords - Netgear GS728TPv2 | User Manual - Page 184
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The following table describes the nonconfigurable information displayed on the page. Table 33. Protocol Based VLAN Group Configuration information Field Group ID Ports Description A number used to identify the - Netgear GS728TPv2 | User Manual - Page 185
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. From the Group ID menu, select the protocol-based VLAN group ID. The Group Name field shows the name that is associated with the group. 8. In the Ports table and LAG table, click each port and LAG that you want - Netgear GS728TPv2 | User Manual - Page 186
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The Local Device Login page displays. If you did not yet register the switch with your NETGEAR account, the Register to unlock all features page displays. For more information, see Register the switch on page 35. - Netgear GS728TPv2 | User Manual - Page 187
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 9. From the Interface Mode menu, select the voice VLAN mode for selected interfaces: • Disable. This is the default value. • None. Allow the IP phone to use its own configuration to send untagged voice traffic. • VLAN - Netgear GS728TPv2 | User Manual - Page 188
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports GARP is part of the IEEE 802.1p extension to its 802.1D (spanning tree) specification. It includes the following: • GARP Information Declaration (GID). The - Netgear GS728TPv2 | User Manual - Page 189
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports This selects the GARP VLAN registration protocol administrative mode for the switch. The default is Disable. 8. Click the Apply button. Your settings are saved. Configure GARP ports Note: It can take up to 10 - Netgear GS728TPv2 | User Manual - Page 190
and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. Select whether to display physical interfaces, LAGs, or both by clicking one of the following links above the table heading: • 1 (the unit ID of the switch). Only physical interfaces are displayed. This is the default - Netgear GS728TPv2 | User Manual - Page 191
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports centiseconds (10 seconds). An instance of this timer exists for each GARP participant for each port. 13. Click the Apply button. Your settings are saved. Configure Auto-VoIP Voice over Internet Protocol (VoIP) - Netgear GS728TPv2 | User Manual - Page 192
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports For information about the credentials, see Credentials for the local browser UI on page 34. 5. Click the Login button. The System Information page displays. 6. Select Switching > Auto-VoIP > Protocol-based > Port - Netgear GS728TPv2 | User Manual - Page 193
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 9. Click the Apply button. Your settings are saved. Configure the Auto-VoIP OUI-based properties With Organizationally Unique Identifier (OUI)-based Auto-VoIP, voice prioritization is provided based on OUI bits. To - Netgear GS728TPv2 | User Manual - Page 194
-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The default value is 7. 9. Click the Apply button. Your settings are saved. Configure the OUI-based port settings The port settings page allows you to configure the OUI port settings. To configure the OUI-based port - Netgear GS728TPv2 | User Manual - Page 195
and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. Select whether to display physical interfaces, LAGs, or both by clicking one of the following links above the table heading: • 1 (the unit ID of the switch). Only physical interfaces are displayed. This is the default - Netgear GS728TPv2 | User Manual - Page 196
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Manage the OUI table Device hardware manufacturers can include an OUI in a network adapter to help identify a hardware device. The OUI is a unique 24-bit - Netgear GS728TPv2 | User Manual - Page 197
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports For information about the credentials, see Credentials for the local browser UI on page 34. 5. Click the Login button. The System Information page displays. 6. Select Switching > Auto-VoIP > OUI-based > OUI Table. - Netgear GS728TPv2 | User Manual - Page 198
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Delete one or more OUI prefixes from the OUI table To delete one or more OUI prefixes from the OUI table: 1. Connect your computer to - Netgear GS728TPv2 | User Manual - Page 199
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Access the switch on-network and connected to the - Netgear GS728TPv2 | User Manual - Page 200
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Configure Spanning Tree port settings on page 204. • MSTP. Multiple Spanning Tree Protocol (MSTP, also referred to as MST) supports multiple instances of spanning tree to efficiently channel VLAN 200 User Manual - Netgear GS728TPv2 | User Manual - Page 201
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Access the switch on-network and connected to the - Netgear GS728TPv2 | User Manual - Page 202
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Port in progress on any port assigned to the the CST. Port to access the designated port saves its configuration BPDU information. The derived value of the Root Port IP address of the switch. Configure Switching 202 User - Netgear GS728TPv2 | User Manual - Page 203
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports If you do not know the IP address of the switch, see Access the switch on-network and connected to the Internet on page 20 or Access the switch off-network on - Netgear GS728TPv2 | User Manual - Page 204
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports less than or equal to (2 * Bridge Forward Delay) - 1 and greater than or equal to 2 * (Bridge Hello Time +1). The default the corresponding VLAN IDs associated with each of them. Table consisting of the VLAN IDs and - Netgear GS728TPv2 | User Manual - Page 205
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports If you do not know the IP address of the switch, see Access the switch on-network and connected to the Internet on page 20 or Access the switch off-network on - Netgear GS728TPv2 | User Manual - Page 206
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 10. From the Fast Link menu, select whether the specified port is an edge port within the CST. The possible values are Enable and Disable. The default value is Disable. 11. From the BPDU Forwarding menu, configure - Netgear GS728TPv2 | User Manual - Page 207
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports View the CST port status You can display the common spanning tree (CST) and internal spanning tree for a specific port on the switch. To view the CST port status: 1. Connect your computer to the same network as the - Netgear GS728TPv2 | User Manual - Page 208
and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. Select whether to display physical interfaces, LAGs, or both by clicking one of the following links above the table heading: • 1 (the unit ID of the switch). Only physical interfaces are displayed. This is the default - Netgear GS728TPv2 | User Manual - Page 209
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Table 38. CST port status (continued) Field CST Path Cost Port Forwarding State Description Path cost to the CST regional root. The forwarding state of this port. View the Rapid STP information You can view - Netgear GS728TPv2 | User Manual - Page 210
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports • All. Both physical interfaces and LAGs are displayed. The following table describes the Rapid STP status information displayed on the page. Table 39. Rapid STP - Netgear GS728TPv2 | User Manual - Page 211
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports default value is 32768. The valid range is 0-61440. • VLAN Id. The menu includes all VLANs that are configured on the switch. You can select VLANs Cost Root Port Description in progress on any port assigned to the - Netgear GS728TPv2 | User Manual - Page 212
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Modify an MST instance To modify an MST instance: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired - Netgear GS728TPv2 | User Manual - Page 213
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Access the switch on-network and connected to the - Netgear GS728TPv2 | User Manual - Page 214
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports If you do not know the IP address of the switch, see Access the switch on-network and connected to the Internet on page 20 or Access the switch off-network on - Netgear GS728TPv2 | User Manual - Page 215
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 10. Configure the MST values for the selected interfaces: • Port Priority. The priority for a particular port within the selected MST instance. The port priority is set in multiples of 16. If you specify a value - Netgear GS728TPv2 | User Manual - Page 216
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Table 41. MST port status information (continued) Field Designated Bridge Designated Port Description The bridge identifier of the bridge with the designated port. It is made up using the bridge priority and the - Netgear GS728TPv2 | User Manual - Page 217
and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. Select whether to display physical interfaces, LAGs, or both by clicking one of the following links above the table heading: • 1 (the unit ID of the switch). Only physical interfaces are displayed. This is the default - Netgear GS728TPv2 | User Manual - Page 218
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports To view, search, or clear the MFDB table: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection - Netgear GS728TPv2 | User Manual - Page 219
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports If the address exists, the entry is displayed. An exact match is required. Table 43. MFDB table information Field Description MAC Address The multicast MAC address for which you requested data. VLAN ID The VLAN - Netgear GS728TPv2 | User Manual - Page 220
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The System Information page displays. 6. Select Switching > Multicast > MFDB > MFDB Statistics. The following table describes the MFDB Statistics fields. Table 44. MFDB Statistics information Field - Netgear GS728TPv2 | User Manual - Page 221
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports • If you previously managed the switch through the Insight app or Cloud portal, enter the Insight network password for the last Insight network location. For information about the credentials, see Credentials for - Netgear GS728TPv2 | User Manual - Page 222
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Allowing switches to snoop IGMP packets can solve this problem. While the IGMP packets are being forwarded throughout the network, the switch uses the information in the packets to determine which segments must - Netgear GS728TPv2 | User Manual - Page 223
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. Select the IGMP Snooping Status Enable or Disable radio button. This specifies the administrative mode for IGMP snooping for the switch. The default is Disable. 8. Select the Validate IGMP IP header Enable or - Netgear GS728TPv2 | User Manual - Page 224
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Configure IGMP snooping for interfaces To configure IGMP snooping for interfaces: 1. Connect your computer to the same network as the switch. You can use a WiFi - Netgear GS728TPv2 | User Manual - Page 225
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports • LAG. Only LAGs are displayed select whether fast leave mode is enabled. The option are Enable and Disable. The default is Disable. 14. Click the Apply button. Your settings are saved. View, search, User Manual - Netgear GS728TPv2 | User Manual - Page 226
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Access the switch on-network and connected to the - Netgear GS728TPv2 | User Manual - Page 227
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Table 46. IGMP Snooping Table information (continued) Field Description Interface Description The text description of this multicast table entry. Possible values are Management Configured, Network - Netgear GS728TPv2 | User Manual - Page 228
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. To enable IGMP snooping on a VLAN, in the VLAN ID field, enter the VLAN ID. 8. Configure the IGMP snooping values: • Admin Mode. Enable or disable IGMP snooping for the specified VLAN ID. The default is Disable - Netgear GS728TPv2 | User Manual - Page 229
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Modify IGMP snooping settings for a VLAN To modify IGMP snooping settings for a VLAN: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to - Netgear GS728TPv2 | User Manual - Page 230
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Disable IGMP snooping on a VLAN and remove it from the table To disable IGMP snooping on a VLAN and remove it from the table: 1. Connect your computer to the same network as the switch. You can use a WiFi or - Netgear GS728TPv2 | User Manual - Page 231
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports To configure one or more IGMP multicast router interfaces: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired - Netgear GS728TPv2 | User Manual - Page 232
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 8. Select one or more interfaces by taking one of the following actions: • To configure a single interface, select the check box associated with the port, or type the port number in the Go To Interface field and - Netgear GS728TPv2 | User Manual - Page 233
-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The System Information page displays. 6. Select Switching> Multicast > IGMP Snooping > Multicast Router VLAN Configuration. 7. From the Interface menu, select the interface. 8. In the VLAN ID field, enter the VLAN - Netgear GS728TPv2 | User Manual - Page 234
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports If you do not know the IP address of the switch, see Access the switch on-network and connected to the Internet on page 20 or Access the switch off-network on - Netgear GS728TPv2 | User Manual - Page 235
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 8. Click the Apply button. Your settings are saved. Configure an IGMP snooping querier for VLANs You can configure IGMP queriers for use with VLANs on the network. To configure IGMP snooping for a VLAN: 1. Connect - Netgear GS728TPv2 | User Manual - Page 236
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 8. Configure the following settings: • VLAN ID. The VLAN ID for which the IGMP snooping querier is to be enabled. • Querier Election Participate Mode. Enable or disable querier this mode: - Disable. Upon seeing - Netgear GS728TPv2 | User Manual - Page 237
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The following table describes the nonconfigurable information displayed on the page. Table 47. Querier VLAN Status information Field Description VLAN ID The VLAN ID on which IGMP snooping querier is - Netgear GS728TPv2 | User Manual - Page 238
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The MLD protocol is derived from IGMP. MLD version 1 (MLDv1) is equivalent to IGMPv2, and MLD version 2 (MLDv2) is equivalent to IGMPv3. MLD is a subprotocol - Netgear GS728TPv2 | User Manual - Page 239
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. Select the MLD Snooping Admin Mode Enable radio button. By default the group address. The VLANs on which MLD snooping web browser, enter the IP address of the switch. If you do not know the IP address of the switch - Netgear GS728TPv2 | User Manual - Page 240
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports If you did not yet register the switch with your NETGEAR account, the Register to unlock all features page displays. For more information, see Register the switch on page 35. 4. Enter one of the following passwords - Netgear GS728TPv2 | User Manual - Page 241
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 10. In the Membership Interval field, specify the time that the switch must wait for a report for a particular group on a particular interface before it deletes - Netgear GS728TPv2 | User Manual - Page 242
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports By default, the local device password is password. You must change this password at initial login. • If you previously managed the switch through the Insight app or Cloud portal, enter the Insight network password VLAN - Netgear GS728TPv2 | User Manual - Page 243
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Modify the MLD snooping settings for a VLAN To the modify MLD snooping settings for a VLAN: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your - Netgear GS728TPv2 | User Manual - Page 244
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Access the switch on-network and connected to the - Netgear GS728TPv2 | User Manual - Page 245
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 11. Enter one of the following passwords: • After initial login, enter your local device password. By default, the local device password is password. You must change this password Configure Switching 245 User Manual - Netgear GS728TPv2 | User Manual - Page 246
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Configure an MLD multicast router VLAN To configure an MLD multicast router VLAN: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the - Netgear GS728TPv2 | User Manual - Page 247
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 10. Click the Apply button. Your settings are saved. Configure an MLD snooping querier You can configure the settings for an MLD snooping querier. To - Netgear GS728TPv2 | User Manual - Page 248
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. Configure the following settings: • Querier Admin Mode. Enable or disable MLD snooping for the switch. The default is Disable. • Querier Address. Enter an IP address. This specifies the snooping querier address - Netgear GS728TPv2 | User Manual - Page 249
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports If you did not yet register the switch with your NETGEAR account, the Register to unlock all features page displays. For more information, see Register the switch on page 35. 4. Enter one of the following passwords - Netgear GS728TPv2 | User Manual - Page 250
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The following table describes the nonconfigurable information displayed on the page. Table 49. MLD Snooping Querier VLAN Address The IP address of the last querier from which a query was snooped on the VLAN. Last - Netgear GS728TPv2 | User Manual - Page 251
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Configure the global MVR settings To configure the global MVR settings: 1. Connect your computer to the same network as the switch. You can use a WiFi - Netgear GS728TPv2 | User Manual - Page 252
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports All source ports belong to this VLAN. The value can be set in a range of 1 to 4093. The default value is 1. 9. In the MVR Global Query Response Time field, set the maximum time that the switch must wait for an - Netgear GS728TPv2 | User Manual - Page 253
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports By default, the local device password is password. You must change this password at initial login. • If you previously managed the switch through the Insight app or Cloud portal, enter the Insight network password - Netgear GS728TPv2 | User Manual - Page 254
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports If you do not know the IP address of the switch, see Access the switch on-network and connected to the Internet on page 20 or Access the switch off-network on - Netgear GS728TPv2 | User Manual - Page 255
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Configure the MVR interface settings To configure the MVR interface setting: 1. Connect your computer to the same network as the switch. You can use a WiFi - Netgear GS728TPv2 | User Manual - Page 256
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports • All. Both physical interfaces and LAGs are displayed. 8. Select one or more interfaces by taking one of the following actions: • To configure a single interface, select the check box associated with the port, or - Netgear GS728TPv2 | User Manual - Page 257
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports By default, the local device password is password. You must change this password at initial login. • If you previously managed the switch through the Insight app or Cloud portal, enter the Insight network password - Netgear GS728TPv2 | User Manual - Page 258
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports View, search, and manage the MAC address table You can view or configure the MAC address table. This table contains information about unicast entries for - Netgear GS728TPv2 | User Manual - Page 259
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. Use the Search menu and field to search for a MAC address, VLAN ID, or interface number: • Search by MAC Address. From value of an existing instance of dot1dStaticAddress. Configure Switching 259 User Manual - Netgear GS728TPv2 | User Manual - Page 260
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Set the dynamic address aging interval You can set the address aging interval for the forwarding database. This is the time-out period in seconds - Netgear GS728TPv2 | User Manual - Page 261
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Add a static MAC address to the MAC address table To add a static MAC address to the MAC address table: 1. Connect your computer to the same - Netgear GS728TPv2 | User Manual - Page 262
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports ports that are members of the same VLAN, just like any other broadcast packet. The packet is not forwarded to the port the interface level. Loop protection is supported on physical interfaces and static LAG interfaces - Netgear GS728TPv2 | User Manual - Page 263
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports If you do not know the IP address of the switch, see Access the switch on-network and connected to the Internet on page 20 or Access the switch off-network on - Netgear GS728TPv2 | User Manual - Page 264
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 11. Click the Apply button. Your settings are saved. View and configure Layer 2 loop protection on a port To view and configure L2 loop protection on a port: 1. Connect your computer to the same network as the - Netgear GS728TPv2 | User Manual - Page 265
and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. Select whether to display physical interfaces, LAGs, or both by clicking one of the following links above the table heading: • 1 (the unit ID of the switch). Only physical interfaces are displayed. This is the default - Netgear GS728TPv2 | User Manual - Page 266
Routing This chapter contains the following sections. • Routing concepts • Configure the routing mode • Configure IPv6 routing • Configure VLAN routing • Configure router discovery for a VLAN routing interface • Manage routes and view the routing table • Configure Address Resolution Protocol 266 - Netgear GS728TPv2 | User Manual - Page 267
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Routing concepts The switch supports IP routing. When a packet enters the switch, the switch checks the destination MAC address to determine if it matches any of the configured routing interfaces. If - Netgear GS728TPv2 | User Manual - Page 268
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports If you did not yet register the switch with your NETGEAR account, the Register to unlock all features page displays. For more information, see Register the switch on page 35. 4. Enter one of the following passwords - Netgear GS728TPv2 | User Manual - Page 269
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports View the IP routing statistics You can view the IP routing statistics as specified in RFC 1213. To view the IP routing statistics: 1. Connect your computer to the same network as the switch. You can use a WiFi or - Netgear GS728TPv2 | User Manual - Page 270
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The following table describes the nonconfigurable information displayed on the page. Table 56. IP IP IP options, and so on. The number of input datagrams discarded because the IP address in their IP IP IP destination IP - Netgear GS728TPv2 | User Manual - Page 271
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Table 56. IP IP datagrams for which no problems default gateways are down. The maximum number of seconds for which received fragments are held while they are awaiting reassembly at this entity. The number of IP Manual - Netgear GS728TPv2 | User Manual - Page 272
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Table 56. IP . The number of ICMP messages that this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value does not include sent. Configure Routing 272 User Manual - Netgear GS728TPv2 | User Manual - Page 273
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Configure IPv6 routing Note: IPv6 is supported on VLAN interfaces only, not on physical ports. Configure the global IPv6 routing settings You can configure the global IPv6 routing settings for the switch. To enable - Netgear GS728TPv2 | User Manual - Page 274
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. Next to IPv6 Unicast Routing, specify whether IPv6 unicast routing is globally enabled by selecting the Enable radio button or the Disable radio button. 8. Click - Netgear GS728TPv2 | User Manual - Page 275
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports • Best Routes Only. Show only the best active routes. • Configured Routes Only. Show only the manually configured routes. 8. To refresh the page with the latest information about the switch, click the Refresh - Netgear GS728TPv2 | User Manual - Page 276
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports For information about the credentials, see Credentials for the local browser UI on page 34. 5. Click the Login button. The System Information page displays. 6. Select Routing> IPv6 > Advanced > VLAN default default - Netgear GS728TPv2 | User Manual - Page 277
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The default 0 to 600. The default is 1. 13. In default router. The range of router life time is 0 to 9000. The default to 4294967295. The default is 0. 15. 3600000. The default is 0. default The default The default value - Netgear GS728TPv2 | User Manual - Page 278
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 22. Click the Apply button. Your settings are saved. The following table describes the nonconfigurable data that is displayed. Table 58. IPv6 VLAN Configuration information Field Routing Mode Operational Mode - Netgear GS728TPv2 | User Manual - Page 279
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. From the Interface menu, select the interface to be configured. When the selection is changed, the page refreshes, causing all fields to be updated address configuration. The default value is Enable. Manual - Netgear GS728TPv2 | User Manual - Page 280
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports View the IPv6 routing statistics To view the IPv6 routing statistics: 1. Connect your computer to the same network as the switch. You can use a WiFi - Netgear GS728TPv2 | User Manual - Page 281
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The previous figure shows the top of the page only. 7. To refresh the page with the latest discarded because no route could be found to transmit them to their destination. Configure Routing 281 User Manual - Netgear GS728TPv2 | User Manual - Page 282
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports not carry enough data. The number of input IPv6 datagrams for which no problems were encountered to prevent their continued processing, but that were discarded for reasons . Configure Routing 282 User Manual - Netgear GS728TPv2 | User Manual - Page 283
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Table 59. IPv6 Statistics information (continued) Field Ip6ReasmOKs Ip6ReasmFails Ip6FragOKs received. The number of ECT0 packets received. The number of CE packets received. Configure Routing 283 User Manual - Netgear GS728TPv2 | User Manual - Page 284
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The following table describes the nonconfigurable ICMPv6 data that is Time Exceeded messages sent. Icmp6OutParmProblems The number of ICMP Parameter Problem messages sent. Configure Routing 284 User Manual - Netgear GS728TPv2 | User Manual - Page 285
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Table 60. ICMPv6 Statistics information ( 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Access the switch on-network and - Netgear GS728TPv2 | User Manual - Page 286
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports If you did not yet register the switch with your NETGEAR account, the Register to unlock all features page displays. For more information, see Register the switch on page 35. 4. Enter one of the following passwords - Netgear GS728TPv2 | User Manual - Page 287
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Table 61. IPv6 Neighbor Table information (continued) Field MAC Address isRtr Neighbor State Last Updated Description The MAC address associated with an interface. Indicates whether the neighbor is a router. If - Netgear GS728TPv2 | User Manual - Page 288
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 4. Enter one of the following passwords: • After initial login, enter your local device password. By default, the local device password is password. You must change this password . Configure Routing 288 User Manual - Netgear GS728TPv2 | User Manual - Page 289
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Configure IPv6 route preferences You can configure the default preference for each protocol. These values are arbitrary values in the range of 1 to 255 and are independent of route metrics. Most routing protocols - Netgear GS728TPv2 | User Manual - Page 290
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 8. Click the Apply button. Your settings are saved. The Local field displays the local preference. Configure VLAN routing You can configure the switch with some ports supporting VLANs and some ports supporting - Netgear GS728TPv2 | User Manual - Page 291
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Access the switch on-network and connected to the - Netgear GS728TPv2 | User Manual - Page 292
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 10. In the Ports table, click each port once, twice, or three times to configure one of the following modes or reset the port to the default settings: • T (Tagged). Select the ports on which all frames transmitted - Netgear GS728TPv2 | User Manual - Page 293
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports By default, the local device password is password. You must change this password at initial login. • If you previously managed the switch through the Insight app or Cloud portal, enter the Insight network password - Netgear GS728TPv2 | User Manual - Page 294
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Delete a VLAN routing interface You can delete a VLAN routing interface that you no longer need. To delete a VLAN routing interface: 1. Connect your computer to the same network as the switch. You can use a WiFi or - Netgear GS728TPv2 | User Manual - Page 295
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Configure router discovery for a VLAN routing interface By default, a VLAN routing interface does not send router advertisements.You can enable the router advertisements for a VLAN routing interface and configure - Netgear GS728TPv2 | User Manual - Page 296
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports If you select Enable, router advertisements are transmitted from the selected interface. 9. In the Advertise Address field, specify the IP Manually add a route and view the routing table To manually add a default - Netgear GS728TPv2 | User Manual - Page 297
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports If you did not yet register the switch with your NETGEAR account, the Register to unlock all features page displays. For more information, see Register the switch on page 35. 4. Enter one of the following passwords - Netgear GS728TPv2 | User Manual - Page 298
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports IP route prefix for the destination. Subnet Mask The portion of the IP outgoing router IP address to adjacent neighbors or the IP address of the local default is 1. The range is 0-255. Configure Routing 298 User - Netgear GS728TPv2 | User Manual - Page 299
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Modify a route You can modify an existing route. To modify an existing route: 1. Connect your computer to the same network as the switch. You can - Netgear GS728TPv2 | User Manual - Page 300
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Delete a route You can delete a route that you no longer need. To delete a route: 1. Connect your computer to the same network as the switch. You - Netgear GS728TPv2 | User Manual - Page 301
-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The switch supports both dynamic and manual ARP configurations. With a manual ARP configuration, you can statically add entries to the ARP table. A device that sends an IP packet must learn the MAC address of the IP - Netgear GS728TPv2 | User Manual - Page 302
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports By default, the local device password is password. You must change this password at initial login. • If you previously managed the switch through the Insight app or Cloud portal, enter the Insight network password - Netgear GS728TPv2 | User Manual - Page 303
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Table 64. ARP cache information (continued) Field Description Routing VLANs ARP Cache IP Address The IP address. It must be the IP address of a device on a subnet attached to one of the switch's existing - Netgear GS728TPv2 | User Manual - Page 304
48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports For information about the credentials, see Credentials for the local browser UI on page 34. 5. Click the Login button. The System Information page displays. 6. Select Routing> ARP > Advanced > ARP Create. 7. In the IP Manual - Netgear GS728TPv2 | User Manual - Page 305
-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports • Click the > button to display the next page of the table data entries. Table 65. Routing VLANs ARP Cache information Field IP Address Interface MAC Address Type Age Description The IP address. It must be the IP - Netgear GS728TPv2 | User Manual - Page 306
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 15 to 21600 seconds. The default value is 1200 seconds. 8. to 10 seconds. The default value is 1 second. 9. 0 to 10. The default value is 4. 10. to 512. The default value is 512. out. The default setting is Enable - Netgear GS728TPv2 | User Manual - Page 307
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an - Netgear GS728TPv2 | User Manual - Page 308
5 5Configure Quality of Service This chapter contains the following sections: • Quality of Service concepts • Manage Class of Service • Manage Differentiated Services 308 - Netgear GS728TPv2 | User Manual - Page 309
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Quality of Service concepts In a switch, each physical port consists of one or more queues for transmitting packets on the attached network. Multiple queues per port are often provided to give preference to - Netgear GS728TPv2 | User Manual - Page 310
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports ports, in accordance with the configured default priority of the ingress port. This process is also used for cases where a trusted port mapping cannot be honored, such as when a non-IP packet arrives at a port - Netgear GS728TPv2 | User Manual - Page 311
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. Either configure the same CoS trust mode settings for all CoS-configurable interfaces or configure CoS settings per interface. By default enter the IP address of the switch. If you do not know the IP address of - Netgear GS728TPv2 | User Manual - Page 312
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The Local Device Login page displays. If you did not yet register the switch with your NETGEAR account, the Register to unlock all features page displays. For more information, see Register the switch on page 35. - Netgear GS728TPv2 | User Manual - Page 313
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports • To configure priority queues. The default value is 802.1p. • DSCP. The six most significant bits of the DiffServ field are called the Differentiated Services Code Point (DSCP Quality of Service 313 User Manual - Netgear GS728TPv2 | User Manual - Page 314
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Access the switch on-network and connected to the - Netgear GS728TPv2 | User Manual - Page 315
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports • To configure multiple interfaces with the same settings, select the check box associated with each interface. • To configure all interfaces with the same settings, select - Netgear GS728TPv2 | User Manual - Page 316
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports For information about the credentials, NETGEAR account, the Register to unlock all features page displays. For more information, see Register the switch on page 35. Configure Quality of Service 316 User Manual - Netgear GS728TPv2 | User Manual - Page 317
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 4. Enter one of the following passwords: • After initial login, enter your local device password. By default, the local device password is password. You must change this password IP precedence Service 317 User Manual - Netgear GS728TPv2 | User Manual - Page 318
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Manage Differentiated Services The QoS feature contains Differentiated Services (DiffServ) support that allows traffic to be classified into streams and given certain QoS treatment in accordance with defined per- - Netgear GS728TPv2 | User Manual - Page 319
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Note the following about the DiffServ process: • Packets are filtered and processed based on defined criteria. The filtering criteria is defined by a class. The processing - Netgear GS728TPv2 | User Manual - Page 320
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 5. Click the Login button. The System Information page displays. 6. Select QoS > DiffServ > Advanced > DiffServ Configuration. 7. Select the administrative mode for DiffServ: • Enable. Differentiated services are - Netgear GS728TPv2 | User Manual - Page 321
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Configure a DiffServ class You can add a new DiffServ class name, or rename or delete an existing class. You can also define the criteria to associate - Netgear GS728TPv2 | User Manual - Page 322
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. In the Class length. 8. From the Class Type menu, select the class type. The switch supports only the class type value All, which means that all the various match criteria Quality of Service 322 User Manual - Netgear GS728TPv2 | User Manual - Page 323
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports • Class of Service. Select this radio button to require the Class of Service (CoS) value in an Ethernet frame header to match the specified CoS value. This option lists all the values for the Class of Service match - Netgear GS728TPv2 | User Manual - Page 324
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports - Mask. The bit mask in IP dotted-decimal format indicating which parts of the source IP address to use for matching against packet content. • Source L4 Port criteria. Configure Quality of Service 324 User Manual - Netgear GS728TPv2 | User Manual - Page 325
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Rename an existing DiffServ class To rename an existing DiffServ class: 1. Connect your computer to the same network as the switch. You can use a WiFi - Netgear GS728TPv2 | User Manual - Page 326
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Access the switch on-network and connected to the Internet on page 20 or Access - Netgear GS728TPv2 | User Manual - Page 327
-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports If you did not yet register the switch with your NETGEAR account, the Register to unlock all features page displays. For more information, see Register the switch on page 35. 4. Enter one of the following passwords - Netgear GS728TPv2 | User Manual - Page 328
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports If you do not know the IP address of the switch, see Access the switch on-network and connected to the Internet on page 20 or Access the switch off-network on - Netgear GS728TPv2 | User Manual - Page 329
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 128. • Source L4 Port. Select this radio button to require a packet's TCP/UDP source port to match the specified menu includes Other as an option for unnamed ports. • Destination Prefix/Length. Select this radio - Netgear GS728TPv2 | User Manual - Page 330
-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports passwords: • After initial login, enter your local device password. By default, the local device password is password. You must change this password at initial login. Configure Quality of Service 330 User Manual - Netgear GS728TPv2 | User Manual - Page 331
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports • If you previously managed the switch through the Insight app or Cloud portal, enter the Insight network password for the last Insight network location. For information about the credentials, see Credentials for - Netgear GS728TPv2 | User Manual - Page 332
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The Class Name page displays. 7. Click the class name, which is a hyperlink. The page on which you can change the class configuration displays. 8. Change the - Netgear GS728TPv2 | User Manual - Page 333
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Configure a DiffServ Policy You can associate a collection of classes with one or more policies. Create and configure a DiffServ policy To create and configure a DiffServ policy: 1. - Netgear GS728TPv2 | User Manual - Page 334
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The new policy is added. 10. After creating the policy, click the policy name. The policy name is a hyperlink to the page on which you - Netgear GS728TPv2 | User Manual - Page 335
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports • Redirect. Select this radio button to require packets to be redirected to an interface or LAG, one of which you must select from the menu. • Mark IP default confirming action and the default Service 335 User Manual - Netgear GS728TPv2 | User Manual - Page 336
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Table 69. DiffServ policy configuration policy attribute (continued) Field Member Class Name Description The name of the class instance within the policy. Rename an existing - Netgear GS728TPv2 | User Manual - Page 337
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Change the policy attributes for an existing DiffServ policy To change the policy attributes for an existing DiffServ policy: 1. Connect your computer to the same - Netgear GS728TPv2 | User Manual - Page 338
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Access the switch on-network and connected to the - Netgear GS728TPv2 | User Manual - Page 339
-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports If you did not yet register the switch with your NETGEAR account, the Register to unlock all features page displays. For more information, see Register the switch on page 35. 4. Enter one of the following passwords - Netgear GS728TPv2 | User Manual - Page 340
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports By default, the local device password is password. You must change this password at initial login. • If you previously managed the switch through the Insight app or Cloud portal, enter the Insight network password - Netgear GS728TPv2 | User Manual - Page 341
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The following table describes the nonconfigurable information displayed on the page. Table 70. Service Interface Configuration information Field Direction Operational Status Description Shows the traffic - Netgear GS728TPv2 | User Manual - Page 342
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 8. Select the check box for the interface. 9. From the Policy In Name menu, select another policy name. 10. Click the Apply button. Your settings are - Netgear GS728TPv2 | User Manual - Page 343
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 8. Select the check boxes that are associated with the interfaces from which you want to remove the policy. 9. From the Policy In Name menu, select - Netgear GS728TPv2 | User Manual - Page 344
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. Click the Refresh button to refresh the page with the latest information about the switch. The following table describes the information available on the Service Statistics page. Table 71. DiffServ Service - Netgear GS728TPv2 | User Manual - Page 345
Security This chapter contains the following sections: • Change the local device password for the local browser UI • Manage the RADIUS settings • Configure the access • Control access with profiles and rules • Configure port authentication • Set up traffic control • Configure access control lists 345 - Netgear GS728TPv2 | User Manual - Page 346
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Change the local device password for the local browser UI You can change the local device password for local browser UI: To change the local device password for the local browser UI: 1. Connect your computer to the - Netgear GS728TPv2 | User Manual - Page 347
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The entered password is displayed in dots. Passwords are up to 20 alphanumeric characters in length, and are case sensitive. 8. In the New Password field, specify the optional new or changed password 347 User Manual - Netgear GS728TPv2 | User Manual - Page 348
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports number of retransmissions for one RADIUS server must pass before the switch attempts the next RADIUS server. Therefore, the maximum delay in receiving a RADIUS response - Netgear GS728TPv2 | User Manual - Page 349
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The Current Server IP Address field is blank if no servers are configured (see Configure a RADIUS authentication server on the switch on page 350). The switch supports from 1 to 15. The default value is 4. 8. In Manual - Netgear GS728TPv2 | User Manual - Page 350
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Configure a RADIUS authentication server on the switch You can configure various settings for a RADIUS authentication server. Add a primary RADIUS authentication server to the switch To - Netgear GS728TPv2 | User Manual - Page 351
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 9. From the Secret Configured menu, select Yes. You must select Yes before you can configure the RADIUS secret. After you add the RADIUS server, this - Netgear GS728TPv2 | User Manual - Page 352
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports For information about the credentials, see Credentials for the local browser UI on page 34. 5. Click the Login button. The System Information page displays. 6. Select - Netgear GS728TPv2 | User Manual - Page 353
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. Select the check box next to the IP address of the server to remove. 8. Click the Delete button. The RADIUS server is removed. 9. Click the Apply button. Your settings are saved. Configure a RADIUS - Netgear GS728TPv2 | User Manual - Page 354
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. In the Accounting Server Address field, specify the IP address of the RADIUS accounting server to add. 8. In the Port field, specify the UDP port number the server uses to verify the RADIUS accounting server - Netgear GS728TPv2 | User Manual - Page 355
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 4. Enter one of the following passwords: • After initial login, enter your local device password. By default, the local device password is password. You must change this password at initial login. • If you - Netgear GS728TPv2 | User Manual - Page 356
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports box next to the IP address of the services: • Authentication. Provides authentication during login and through user names and user-defined passwords the IP address of the switch. If you do not know the IP address - Netgear GS728TPv2 | User Manual - Page 357
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The Local Device Login page displays. If you did not yet register the switch with your NETGEAR account, the Register to unlock all features page displays. For more information, see Register the switch on page 35. - Netgear GS728TPv2 | User Manual - Page 358
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports If you do not know the IP address of the switch, see Access the switch on-network and connected to the Internet on page 20 or Access the switch off-network on - Netgear GS728TPv2 | User Manual - Page 359
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 13. Click the Apply button. Your settings are saved. Modify the settings for a TACACS+ server on the switch To modify the settings for a TACACS+ server - Netgear GS728TPv2 | User Manual - Page 360
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Remove a TACACS+ server from the switch To remove a TACACS+ server from the switch: 1. Connect your computer to the same network as the switch. You can - Netgear GS728TPv2 | User Manual - Page 361
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Configure authentication lists A login list specifies one or more authentication methods to validate switch or port access for the admin user. You can configure a default login list. Note: The admin user is - Netgear GS728TPv2 | User Manual - Page 362
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. Select the check box even if you specified more than one method. • RADIUS. The user's ID and password are authenticated using the RADIUS server. If you select RADIUS or TACACS+ as the Security 362 User Manual - Netgear GS728TPv2 | User Manual - Page 363
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Configure an HTTPS authentication list You can configure the default login list for secure HTTP (HTTPS). To configure an HTTPS authentication list: 1. Connect your computer to the same network as the switch. You - Netgear GS728TPv2 | User Manual - Page 364
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports stored ID and password are used for The user's ID and password are authenticated using the 's ID and password are authenticated using default list. The default IP address of the switch. Manage Device Security 364 User - Netgear GS728TPv2 | User Manual - Page 365
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports If you do not know the IP address of the switch, see Access the switch on-network and connected to the Internet on page 20 or Access the switch off-network on - Netgear GS728TPv2 | User Manual - Page 366
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Manage the Smart Control Center Utility As a security enhancement, you can disable the Smart Control Center SCC utility. By default, the utility is enabled and allows you to configure the switch (see Discover the - Netgear GS728TPv2 | User Manual - Page 367
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. Select the one of the following SCC Admin Mode radio buttons: • Enable. SCC can discover the switch and perform actions on the switch. This is the default setting. • Disable. SCC can discover the switch but - Netgear GS728TPv2 | User Manual - Page 368
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports If you did not yet register the switch with your NETGEAR account, the Register to unlock all features page displays. For more information, see Register the switch on page 35. 4. Enter one of the following passwords - Netgear GS728TPv2 | User Manual - Page 369
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Configure the HTTPS settings Secure HTTP (HTTPS) enables the transmission of HTTP over an encrypted Secure Sockets Layer (SSL) or Transport Layer Security (TLS) connection. - Netgear GS728TPv2 | User Manual - Page 370
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. Select the HTTPS Admin Mode Enable or Disable radio button. This enables or disables the administrative mode of secure HTTP (HTTPS). The configured value is displayed. The default Device Security 370 User Manual - Netgear GS728TPv2 | User Manual - Page 371
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Access the switch on-network and connected to the - Netgear GS728TPv2 | User Manual - Page 372
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Delete an SSL certificate Note: Before you can delete a certificate, you must disable HTTPS (see Configure the HTTPS settings on page 369) and log back - Netgear GS728TPv2 | User Manual - Page 373
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Transfer an existing certificate to the switch You can transfer a certificate file to the switch. For the switch to accept HTTPS connections from a device, the - Netgear GS728TPv2 | User Manual - Page 374
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports default is IPv4. 9. In the TFTP Server IP field, specify the address of the TFTP server. The address can be an IP to 96 characters. The default is blank. 11. In up to 32 characters. The default is blank. 12. Select the - Netgear GS728TPv2 | User Manual - Page 375
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Control access with profiles and rules Access control allows you to configure an access control profile and set rules for access to the local browser UI, access by SNMP stations, and client access to a TFTP - Netgear GS728TPv2 | User Manual - Page 376
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Rule Type Service Type Source IP Address Mask Priority service type chosen. The policy is restricted by the service type chosen. The source IP address of the client originating the management traffic. The subnet mask of the IP - Netgear GS728TPv2 | User Manual - Page 377
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Add a rule to the access profile After you add the access profile, you can add one or more security access rules to the access profile. - Netgear GS728TPv2 | User Manual - Page 378
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. From the Rule Type menu, select UI. If that situation occurs, you must reset the switch to factory default settings (see Reset the switch to its factory default settings on page 496). Manage Device Security - Netgear GS728TPv2 | User Manual - Page 379
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports To activate the access profile: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your - Netgear GS728TPv2 | User Manual - Page 380
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Access the switch on-network and connected to the - Netgear GS728TPv2 | User Manual - Page 381
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Deactivate an access profile You can deactivate an access profile. To deactivate an access profile: 1. Connect your computer to the same network as the switch. - Netgear GS728TPv2 | User Manual - Page 382
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Remove an access profile You can remove an access profile that you no longer need. Before you can remove the access profile, you must deactivate - Netgear GS728TPv2 | User Manual - Page 383
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Configure port authentication With port-based authentication, when 802.1X is enabled globally and on the port, successful authentication of any one supplicant attached to the port results in all users being able - Netgear GS728TPv2 | User Manual - Page 384
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 5. Click the Login button. The System Information page displays. 6. Select Security > Port Authentication > Basic > 802.1X Configuration. 7. Select the Port Based Authentication State Enable radio button. This - Netgear GS728TPv2 | User Manual - Page 385
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Manage port authentication on individual ports You can enable and configure port access control on one or more physical ports. Configure 802.1X settings for a port To configure 802.1X settings for a port: 1. - Netgear GS728TPv2 | User Manual - Page 386
-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports You can also select multiple check boxes to apply the same settings to the selected ports, or select the check box in the heading row to apply the same settings to all ports. 9. Specify the following settings: • Port - Netgear GS728TPv2 | User Manual - Page 387
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports • Max EAP Requests. Specify the maximum number of EAP requests for the selected port. The value is the maximum number Request Response Success Fail Timeout Initialize Idle Manage Device Security 387 User Manual - Netgear GS728TPv2 | User Manual - Page 388
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Initialize 802.1X on a port To initialize 802.1X on a port: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or - Netgear GS728TPv2 | User Manual - Page 389
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Access the switch on-network and connected to the - Netgear GS728TPv2 | User Manual - Page 390
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports If you do not know the IP address of the switch, see Access the switch on-network and connected to the Internet on page 20 or Access the switch off-network on - Netgear GS728TPv2 | User Manual - Page 391
and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Table 76. Port summary (continued) Field Description Operating Control Mode The control mode under which the port is actually operating. Possible values are as follows: • ForceUnauthorized • ForceAuthorized • Auto - Netgear GS728TPv2 | User Manual - Page 392
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 5. Click the Login button. The System Information page displays. 6. Select Security > Port configure MAC filters, storm control, port security, protected port, and private VLAN settings. Manage MAC filtering You can - Netgear GS728TPv2 | User Manual - Page 393
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports A packet with a MAC address and VLAN ID that you specify for a filter can be transmitted only from a port that is part of the outbound filter. To create a MAC filter: 1. Connect your computer to the same network as - Netgear GS728TPv2 | User Manual - Page 394
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. From the MAC Filter menu, select Create Filter. If you did not configure any filters, this is the only option available. 8. From the VLAN ID menu, select the VLAN that must be used with the MAC address. 9. In - Netgear GS728TPv2 | User Manual - Page 395
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Note: Destination ports can be included only in a multicast filter. 12. Click the Apply button. Your settings are saved. Delete a MAC filter To delete a MAC filter: 1. Connect your - Netgear GS728TPv2 | User Manual - Page 396
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports View the MAC filter summary You can view the MAC filters that are configured on the switch. To view the MAC filter summary: 1. Connect your - Netgear GS728TPv2 | User Manual - Page 397
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Table 78. MAC Filter Summary information (continued) Field Description Source Port Members The ports to be used for filtering inbound packets. Destination Port Members The ports to be used for filtering - Netgear GS728TPv2 | User Manual - Page 398
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports total threshold between 0 and 100%. The default is 5%. 10. From the Control Action mode menu, select one : • None. No action is taken. This is the default setting. • Trap. If the threshold of the configured broadcast - Netgear GS728TPv2 | User Manual - Page 399
-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Configure storm control settings for one or more ports After you configure the global settings, you can specify storm control settings for one or more ports. To configure storm control settings for one or more ports - Netgear GS728TPv2 | User Manual - Page 400
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The default settings in the Port Settings section depends on the global storm control settings (see Configure global storm control settings on page 397), which apply to all ports. 7. In the Port Settings section, - Netgear GS728TPv2 | User Manual - Page 401
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The Local Device Login page displays. If you did not yet register the switch with your NETGEAR account, the Register to unlock all features page displays. For more information, see Register the switch on page 35. - Netgear GS728TPv2 | User Manual - Page 402
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Table 79. Port Security Violations information (continued) Field VLAN ID Description The VLAN ID corresponding to the last MAC address violation. Configure port security settings A MAC address can be defined as - Netgear GS728TPv2 | User Manual - Page 403
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 6. Select Security > Traffic Control > Port Port Security. Enable or disable the port security feature for the selected interfaces The default received. The default value is No is received. The default value is No, - Netgear GS728TPv2 | User Manual - Page 404
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports View learned MAC addresses and convert them to static MAC addresses After you enabled port security globally (see Configure the global port security mode on page 400) and enabled port security for specific - Netgear GS728TPv2 | User Manual - Page 405
48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 10. Select Security > Traffic Control > Port Security > Security MAC Address. 11. From the Port List menu, select the individual interface. The Dynamic MAC Address Table displays the MAC addresses and their associated VLANs - Netgear GS728TPv2 | User Manual - Page 406
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports If you do not know the IP address of the switch, see Access the switch on-network and connected to the Internet on page 20 or Access the switch off-network on - Netgear GS728TPv2 | User Manual - Page 407
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Configure a private VLAN To configure a private VLAN: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or - Netgear GS728TPv2 | User Manual - Page 408
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 9. Click the Apply button. Your settings are saved. Configure private VLAN associations To configure private VLAN associations: 1. Connect your computer to the same network as the switch. You can use a WiFi or - Netgear GS728TPv2 | User Manual - Page 409
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The following table describes the nonconfigurable information displayed on the page. Table 80. Private VLAN Association information Field Isolated VLAN Community VLAN(s) Description The isolated VLAN associated - Netgear GS728TPv2 | User Manual - Page 410
and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. Select whether to display physical interfaces, LAGs, or both by clicking one of the following links above the table heading: • 1 (the unit ID of the switch). Only physical interfaces are displayed. This is the default - Netgear GS728TPv2 | User Manual - Page 411
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports If you do not know the IP address of the switch, see Access the switch on-network and connected to the Internet on page 20 or Access the switch off-network on - Netgear GS728TPv2 | User Manual - Page 412
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The range of the VLAN ID is 2-4093. 10. In the Host Secondary VLAN field, enter the secondary VLAN ID for host association mode. The range of the VLAN ID is 2-4093. 11. Click the Apply button. Your settings are - Netgear GS728TPv2 | User Manual - Page 413
and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. Select whether to display physical interfaces, LAGs, or both by clicking one of the following links above the table heading: • 1 (the unit ID of the switch). Only physical interfaces are displayed. This is the default - Netgear GS728TPv2 | User Manual - Page 414
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports updates, decide which types of traffic are forwarded or blocked, and above all provide security for the network. The switch's software supports ports easily ports IP address of the switch. If you do not know the IP - Netgear GS728TPv2 | User Manual - Page 415
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports If you did not yet register the switch with your NETGEAR account, the Register to unlock all features page displays. For more information, see Register the switch on page 35. 4. Enter one of the following passwords - Netgear GS728TPv2 | User Manual - Page 416
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports • ACL Based on With this selection, you can add a destination MAC address, destination MAC mask, and VLAN. • True. Signifies that all packets must match the selected ACL and rule and are 416 User Manual - Netgear GS728TPv2 | User Manual - Page 417
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The rest of the rule match criteria fields available for configuration depend on the selected ACL type. For information about the possible match criteria fields, - Netgear GS728TPv2 | User Manual - Page 418
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports b. In the Destination MAC Mask field, specify the destination MAC address mask that must be compared against the information in an Ethernet frame. The valid - Netgear GS728TPv2 | User Manual - Page 419
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 5. Click the Login button. The System Information page displays. 6. Select Security > ACL > ACL Wizard. The ACL Wizard page displays. 7. Select check box that is associated with the rule. 8. Update the match - Netgear GS728TPv2 | User Manual - Page 420
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports ACL Wizard Example In the following figure, the ACL rule is configured to check for packet matches on ports 4, 5, and 9 and on LAG 1. Only the MAC binding table on page 430. Manage Device Security 420 User Manual - Netgear GS728TPv2 | User Manual - Page 421
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Add a MAC ACL To add a MAC ACL: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to - Netgear GS728TPv2 | User Manual - Page 422
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The name string can include alphabetic, numeric, hyphen, underscore, or space characters only. The name must start with an alphabetic character. 8. Click the Add button. - Netgear GS728TPv2 | User Manual - Page 423
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 9. Click the Apply button. Your settings are saved. Delete a MAC ACL To delete a MAC ACL: 1. Connect your computer to the same network as the switch. - Netgear GS728TPv2 | User Manual - Page 424
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Add a rule to a MAC ACL To add a rule to a MAC ACL: 1. Connect your computer to the same network as the switch. You can use a WiFi - Netgear GS728TPv2 | User Manual - Page 425
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 9. From the Action menu, select the action that must be taken if a packet matches the rule's criteria: • are as follows: • Appletalk • ARP • IBM SNA • IPv4 • IPv6 • IPX Manage Device Security 425 User Manual - Netgear GS728TPv2 | User Manual - Page 426
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports In the VLAN field, specify the VLAN ID that must 4095. Either VLAN range or VLAN can be interval. This field is only supported for a deny action. 23 IP address of the switch. Manage Device Security 426 User - Netgear GS728TPv2 | User Manual - Page 427
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports If you do not know the IP address of the switch, see Access the switch on-network and connected to the Internet on page 20 or Access the switch off-network on - Netgear GS728TPv2 | User Manual - Page 428
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports By default, the local device password is password. You must change this password at initial login. • If you previously managed the switch through the Insight app or Cloud portal, enter the Insight network password - Netgear GS728TPv2 | User Manual - Page 429
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports For information about the credentials, see to several ports and LAGs. The Ports and LAG tables display the available and valid interfaces for ACL binding. All nonrouting physical interfaces, VLAN interfaces, and - Netgear GS728TPv2 | User Manual - Page 430
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 10. Click the Apply button. Your settings are saved. The following table describes the information displayed in the Interface Binding Status table. Table 81. Interface - Netgear GS728TPv2 | User Manual - Page 431
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports For information about the credentials, see IPv4 ACL and applying it to the switch: 1. Add an IPv4 ACL ID (see Add an IP ACL on page 432). The differences between a basic IPv4 ACL and an extended IPv4 ACL are - Netgear GS728TPv2 | User Manual - Page 432
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports • Numbered ACL from 100 to 199. Creates an extended IPv4 ACL, which allows you to permit or deny specific types of Layer 3 or Layer 4 traffic from a source IP address to a destination IP address. This type of ACL - Netgear GS728TPv2 | User Manual - Page 433
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The IP ACL page shows 4 traffic from a source IP address to a destination IP address. This type of ACL provides more granularity and filtering capabilities than the standard IP ACL. • IP ACL Name. Create an IPv4 - Netgear GS728TPv2 | User Manual - Page 434
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Change the number or name of an IPv4 ACL To change the number or name of an IPv4 ACL: 1. Connect your computer to the same - Netgear GS728TPv2 | User Manual - Page 435
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Access the switch on-network and connected to the Internet on page 20 or Access - Netgear GS728TPv2 | User Manual - Page 436
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Access the switch on-network and connected to the - Netgear GS728TPv2 | User Manual - Page 437
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 9. Specify the following match criteria for the rule: • Sequence Number. Enter an ACL sequence number in the range of 1 to 2147483647 that is used to identify the rule. An IP matching this IP ACL rule. the IP ACL - Netgear GS728TPv2 | User Manual - Page 438
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports This field cannot be set if a mirror interface is already configured for the IP ACL rule. • Source IP Address. Enter an IP address using dotted-decimal notation to be compared to a packet's source IP address as a - Netgear GS728TPv2 | User Manual - Page 439
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 9. Modify the basic IP ACL rule criteria. 10. Click the Apply button. Your settings are saved. Delete a basic IPv4 ACL rule To delete a basic IPv4 ACL rule: 1. Connect your - Netgear GS728TPv2 | User Manual - Page 440
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Configure rules for an extended IPv4 ACL You can define rules for extended IP-based ACLs. The access list definition includes rules that specify whether traffic matching the criteria is forwarded normally or - Netgear GS728TPv2 | User Manual - Page 441
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports ID/Name menu, select the IP ACL for which you want to add a rule. For extended IP ACLs, this must be an to 2147483647 that is used to identify the rule. An extended IP ACL can contain up to 50 rules. • Action. Select - Netgear GS728TPv2 | User Manual - Page 442
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports • Egress Queue. If the selection from the Action menu is Permit, select the hardware egress queue identifier that is used to handle all packets matching this IP packet's IP protocol must be matched against: IP, ICMP, - Netgear GS728TPv2 | User Manual - Page 443
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports - If you select the Port radio button, you can either enter the port number yourself or select one of the following protocols from the menu: • The source IP TCP port protocols are domain, echo, ftp, ftpdata, www- - Netgear GS728TPv2 | User Manual - Page 444
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The wildcard mask destination IP TCP port protocols are domain, echo, ftp, ftpdata, www-http, smtp, telnet, pop2, pop3, and bgp. • The destination IP UDP port protocols are domain, echo, snmp, User Manual - Netgear GS728TPv2 | User Manual - Page 445
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports • IGMP Type. If you specify the IGMP type, the IP ACL rule matches the specified IGMP message type. Possible values are in the range 0 to 255. If this field is left empty, it means any. • - Netgear GS728TPv2 | User Manual - Page 446
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports ToS mask value is a hexadecimal number that is composed of numbers 00 to FF. The ToS mask denotes the bit positions in the ToS bits value that are used for comparison against the IP ToS field in a packet. For - Netgear GS728TPv2 | User Manual - Page 447
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 9. Modify the extended IP ACL rule criteria. 10. Click the Apply button. Your settings are saved. Delete an extended IPv4 ACL rule To delete an extended IPv4 ACL rule: 1. - Netgear GS728TPv2 | User Manual - Page 448
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Configure an IPv6 ACL An IPv6 ACL consists of a set of rules that are matched sequentially against a packet. When a packet meets the match criteria of a - Netgear GS728TPv2 | User Manual - Page 449
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports of the IP ACLs configured on the switch. The maximum number of IP ACLs that can associated with the IP ACL. The type web browser, enter the IP address of the switch. If you do not know the IP address of the switch, - Netgear GS728TPv2 | User Manual - Page 450
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The Local Device Login page displays. If you did not yet register the switch with your NETGEAR account, the Register to unlock all features page displays. For more information, see Register the switch on page 35. - Netgear GS728TPv2 | User Manual - Page 451
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports • If you previously managed the switch through the Insight app or Cloud portal, enter the Insight network password for the last Insight network location. For information about the credentials, see Credentials for - Netgear GS728TPv2 | User Manual - Page 452
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 5. Click the Login button. The System Information page displays. 6. Select Security > ACL > Advanced > IPv6 buttons: - Permit. Forward packets that meet the ACL criteria. Manage Device Security 452 User Manual - Netgear GS728TPv2 | User Manual - Page 453
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports - Deny. Drop packets that meet the • The source IP TCP port protocols are domain, echo, ftp, ftpdata, www-http, smtp, telnet, pop2, pop3, and bgp. • The source IP UDP port protocols are domain, echo, snmp, ntp, rip - Netgear GS728TPv2 | User Manual - Page 454
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Each of these values translates into its equivalent port number, which is used as both the start and end of the port range. Select Other from the menu to enter a port number. If you select Other from the menu but - Netgear GS728TPv2 | User Manual - Page 455
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports • The destination IP UDP port protocols are domain, echo, snmp, ntp, rip, time, who, and tftp. Each of these values translates into its equivalent port number, which is used as both the start and end of the port Manual - Netgear GS728TPv2 | User Manual - Page 456
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The ICMPv6 message types are destination-unreachable, echo-reply, echo-request, header, hop-limit, mld-query, mld-reduction, mld-report, nd-na, nd-ns, next-header, no-admin, no-route, packet-too-big, port- - Netgear GS728TPv2 | User Manual - Page 457
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports • If you previously managed the switch through the Insight app or Cloud portal, enter the Insight network password for the last Insight network location. For information about the credentials, see Credentials for - Netgear GS728TPv2 | User Manual - Page 458
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The System Information page displays. 6. Select Security > ACL > Advanced > IPv6 Rules. The IPv6 Rules page displays. 7. From the ACL Name menu, select the ACL that - Netgear GS728TPv2 | User Manual - Page 459
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. From the ACL ID menu, select an existing IP ACL for you which you want to add an IP ACL interface binding. The fixed selection from the Direction menu is Inbound, which means that MAC ACL rules are applied to - Netgear GS728TPv2 | User Manual - Page 460
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The following table describes the nonconfigurable information displayed on the page. Table 84. IP Binding Status table Field Interface Direction ACL Type ACL ID/Name Sequence Number Description The selected - Netgear GS728TPv2 | User Manual - Page 461
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 6. Select Security > ACL > Advanced > Binding Table. 7. To delete an IP with a VLAN. When you do so, the ACL is applied to all interfaces that are members of the VLAN. Add a VLAN ACL binding To add a VLAN ACL binding - Netgear GS728TPv2 | User Manual - Page 462
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports If you did not yet register the switch with your NETGEAR account, the Register to unlock all features page displays. For more information, see Register the switch on page 35. 4. Enter one of the following passwords - Netgear GS728TPv2 | User Manual - Page 463
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Remove a VLAN ACL binding To remove a VLAN ACL binding: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the - Netgear GS728TPv2 | User Manual - Page 464
7 7Monitor the Switch and the Traffic This chapter contains the following sections: • Monitor the switch and the ports • Configure and view the logs • Configure port mirroring 464 - Netgear GS728TPv2 | User Manual - Page 465
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Monitor the switch and the ports You can view and clear port and switch statistics and perform a cable test. View or clear switch statistics You can view detailed statistical information about the traffic that the - Netgear GS728TPv2 | User Manual - Page 466
and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. Select whether to display physical interfaces, LAGs, or both by clicking one of the following links above the table heading: • 1 (the unit ID of the switch). Only physical interfaces are displayed. This is the default - Netgear GS728TPv2 | User Manual - Page 467
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Table 86. Switch statistics Field Description ifIndex The interface index of the interface table entry associated with the processor of this switch. Octets Received The - Netgear GS728TPv2 | User Manual - Page 468
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Table 86. Switch statistics (continued) Field VLAN Deletes Time Since Counters Last Cleared Description The number of VLANs on this switch that were created and then deleted since the last reboot. The elapsed - Netgear GS728TPv2 | User Manual - Page 469
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. Select whether to display physical interfaces, link aggregation groups (LAGs), or both by clicking one of the following links above the table heading: • 1 (or the - Netgear GS728TPv2 | User Manual - Page 470
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Reset the counters for all interfaces on the switch To reset the counters for all interfaces on the switch: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection - Netgear GS728TPv2 | User Manual - Page 471
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports If you do not know the IP address of the switch, see Access the switch on-network and connected to the Internet on page 20 or Access the switch off-network on - Netgear GS728TPv2 | User Manual - Page 472
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports View and manage detailed port statistics You can view a variety of per-port traffic statistics. To view or clear detailed port statistics: 1. Connect your computer to the same network as the switch. You can use a - Netgear GS728TPv2 | User Manual - Page 473
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The previous figure does not show all fields on the Port Detailed Statistics page. 7. From the Interface menu, select the interface for which you want to view the statistics. 8. From the MST ID menu, select the - Netgear GS728TPv2 | User Manual - Page 474
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Table 88. Detailed port statistics Field ifIndex Port Type Port Channel ID Port • Broken The port control administration state. The port must be enabled for it to be allowed into the network. The default is Enabled. - Netgear GS728TPv2 | User Manual - Page 475
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Table 88. Detailed port statistics (continued) Field Description Packets RX and TX 64 Octets The total number of octets) and were otherwise well formed. Monitor the Switch and the Traffic 475 User Manual - Netgear GS728TPv2 | User Manual - Page 476
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Table 88. Detailed port statistics (continued) Field Description Total Packets Received Without Errors The total number of and after a common interval. Monitor the Switch and the Traffic 476 User Manual - Netgear GS728TPv2 | User Manual - Page 477
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Table 88. Detailed port statistics (continued) interface supports or is configured to use, including Ethernet header, CRC, and payload. The possible range is 1522 to 10000. The default maximum 477 User Manual - Netgear GS728TPv2 | User Manual - Page 478
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Table 88. Detailed port statistics (continued) Field Description Single Collision Frames The number of successfully off-network using an Ethernet cable. Monitor the Switch and the Traffic 478 User Manual - Netgear GS728TPv2 | User Manual - Page 479
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Access the switch on-network and connected to the - Netgear GS728TPv2 | User Manual - Page 480
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Table 89. EAP statistics your NETGEAR account, the Register to unlock all features page displays. For more information, see Register the switch on page 35. Monitor the Switch and the Traffic 480 User Manual - Netgear GS728TPv2 | User Manual - Page 481
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 4. Enter one of the following passwords: • After initial login, enter your local device password. By default, the local device password is password. You must change this password at initial login. • If you - Netgear GS728TPv2 | User Manual - Page 482
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Table 90. Cable Test information (continued) Field Cable Length Failure Location Description The estimated length of the cable in meters. The length is displayed as a - Netgear GS728TPv2 | User Manual - Page 483
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports By default, the local device password is password. You must change this password at initial login. • If you previously managed the switch through the Insight app or Cloud portal, enter the Insight network password - Netgear GS728TPv2 | User Manual - Page 484
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports console log. Messages logged to a collector or relay through syslog support the same format as well. The following example shows the standard format for a log message: *Jan 01 2018 00:00:18: AAA-5-CONNECT: New - Netgear GS728TPv2 | User Manual - Page 485
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 5. Click the Login button. The System Logs. The log messages for the current switch sessions are displayed. This is the default setting. • Previous Logs. The previous log messages are displayed, that is, User Manual - Netgear GS728TPv2 | User Manual - Page 486
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The following example shows the standard format for a persistent log message: *Jan 01 2018 00:00:18: AAA-5-CONNECT: New http connection for user admin, - Netgear GS728TPv2 | User Manual - Page 487
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. Select one of the Host Address. Specify the IP address or host name of the syslog host. • Port. Specify the port on the host to which syslog messages must be sent. The default port number is 514. • User Manual - Netgear GS728TPv2 | User Manual - Page 488
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Modify the settings for a remote syslog host To modify the settings for a remote syslog host: 1. Connect your computer to the same network as the switch. - Netgear GS728TPv2 | User Manual - Page 489
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Access the switch on-network and connected to the Internet on page 20 or Access - Netgear GS728TPv2 | User Manual - Page 490
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports If you did not yet register the switch with your NETGEAR account, the Register to unlock all features page displays. For more information, see Register the switch on page 35. 4. Enter one of the following passwords - Netgear GS728TPv2 | User Manual - Page 491
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Table 91. Trap Logs information (continued) Field Log System Up Time Trap Description The sequence number of this trap. The time when this trap occurred, - Netgear GS728TPv2 | User Manual - Page 492
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports For information about the credentials, see Credentials for the local browser UI on page 34. 5. Click the Login button. The System Information page displays. 6. Select Monitoring > Mirroring > Port Mirroring. 7. - Netgear GS728TPv2 | User Manual - Page 493
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports • To select multiple interfaces with the same settings, select the check box associated with each interface. Traffic from the selected ports is sent to the probe port. 12. From the Direction menu, specify the - Netgear GS728TPv2 | User Manual - Page 494
or Troubleshoot the switch This chapter contains the following sections: • Reboot the switch • Reset the switch to its factory default settings • Export a file from the switch • Download a file to the switch or update the software • Manage software images • Perform diagnostics and troubleshooting - Netgear GS728TPv2 | User Manual - Page 495
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Reboot the switch You can reboot the switch from the local browser UI. Note: If you can physically access the switch, you can reboot the switch by pressing the single-function Reset button on the front panel for - Netgear GS728TPv2 | User Manual - Page 496
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 8. Click the Apply button. An Alert pop-up window opens. 9. Click the OK button. The switch reboots. Reset the switch to its factory default settings You can reset the system configuration to the factory default - Netgear GS728TPv2 | User Manual - Page 497
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports If you do not know the IP address of the switch, see Access the switch on-network and connected to the Internet on page 20 or Access the switch off-network on - Netgear GS728TPv2 | User Manual - Page 498
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports To reset the switch to factory default settings and reset the registration status: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to - Netgear GS728TPv2 | User Manual - Page 499
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Export a file from the switch You can export configuration (ASCII or log ASCII) files from the switch to a file server by using TFTP, HTTP, or - Netgear GS728TPv2 | User Manual - Page 500
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. From the File Type menu, select the type of file: • Text Configuration. A text-based configuration file enables you to edit a configured text file (startup-config) - Netgear GS728TPv2 | User Manual - Page 501
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The page displays information about the file transfer progress. The page refreshes automatically when the file transfer completes (or if it fails). Use HTTP to - Netgear GS728TPv2 | User Manual - Page 502
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports offline to personalize it for another similar device (for example, change the device name or IP address), and download it to that device. • Tech Support. The tech support file is a text-base file that contains a - Netgear GS728TPv2 | User Manual - Page 503
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports , change the device name or IP address), and download it to use up to 139 characters. The default is blank. 9. In the update the software (firmware) on the switch. Maintain or Troubleshoot the switch 503 User Manual - Netgear GS728TPv2 | User Manual - Page 504
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Use TFTP to download a file to the switch or update the software image You can download a software (firmware) image, configuration files, and SSL files from a TFTP server to the switch. Before you download a file - Netgear GS728TPv2 | User Manual - Page 505
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 7. From the File Type menu, select the type of file: • Software. The system software image, which is saved in one of two flash sectors called - Netgear GS728TPv2 | User Manual - Page 506
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The default is the IPv4 address 0.0.0.0. 11. In the Transfer File Path field, specify the path on the TFTP server where the file is located. Enter up - Netgear GS728TPv2 | User Manual - Page 507
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports If you did not yet register the switch with your NETGEAR account, the Register to unlock all features page displays. For more information, see Register the switch on page 35. 4. Enter one of the following passwords - Netgear GS728TPv2 | User Manual - Page 508
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 8. If the selection from the File Type menu is Software, the Image Name menu is PEM file. This is the key file, which must be in the format xxxxKEYxxxxx.pem. Maintain or Troubleshoot the switch 508 User Manual - Netgear GS728TPv2 | User Manual - Page 509
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Before you can download and install an SSL security certificate, you must disable HTTPS on the switch. To disable HTTPS and use an HTTP session - Netgear GS728TPv2 | User Manual - Page 510
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 13. Click the Apply button. The file transfer begins. The page displays information about the progress of the file transfer. The page refreshes automatically when - Netgear GS728TPv2 | User Manual - Page 511
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports , change the device name, serial number, IP address), and download it to that device. You can enter up to 32 characters. The default is blank. Note: We recommended that you do Troubleshoot the switch 511 User Manual - Netgear GS728TPv2 | User Manual - Page 512
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports when you are updating the switch NETGEAR account, the Register to unlock all features page displays. For more information, see Register the switch on page 35. Maintain or Troubleshoot the switch 512 User Manual - Netgear GS728TPv2 | User Manual - Page 513
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 4. Enter one of the following passwords: • After initial login, enter your local device password. By default, the local device password is password. You must change this password at initial login. • If you - Netgear GS728TPv2 | User Manual - Page 514
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports If you did not yet register the switch with your NETGEAR account, the Register to unlock all features page displays. For more information, see Register the switch on page 35. 4. Enter one of the following passwords - Netgear GS728TPv2 | User Manual - Page 515
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Delete a software Image To delete a software image: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to - Netgear GS728TPv2 | User Manual - Page 516
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports View the dual image status You can view information about the active and backup images on the system. To view dual image status information: 1. Connect - Netgear GS728TPv2 | User Manual - Page 517
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Perform diagnostics and troubleshooting You can send a ping or a traceroute, and you can perform a memory dump. Ping an IPv4 address You can configure the switch to send a ping request - Netgear GS728TPv2 | User Manual - Page 518
48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports For information about the credentials, see Credentials for the local browser UI on page 34. 5. Click the Login button. The System Information page displays. 6. Select Maintenance > Troubleshooting > Ping IPv4. 7. In the IP - Netgear GS728TPv2 | User Manual - Page 519
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 12. Click the Apply button. The specified address is pinged. The results are displayed below the configurable data in the Results field. Ping an IPv6 - Netgear GS728TPv2 | User Manual - Page 520
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports For information about the credentials, see Credentials for the local browser UI on page 34. 5. Click the Login button. The System Information page displays. 6. Select Maintenance > Troubleshooting > Ping IPv6. 7. - Netgear GS728TPv2 | User Manual - Page 521
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 12. From the Source menu, select the IP address or interface that must be used to send echo request packets: • None. The source address of the ping packet is the address of the default egress interface. • IPv6 - Netgear GS728TPv2 | User Manual - Page 522
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports By default, the local device password is password. You must change this password at initial login. • If you previously managed the switch through the Insight app or Cloud portal, enter the Insight network password - Netgear GS728TPv2 | User Manual - Page 523
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 14. In the Size field, enter the size of the probe packets. The default value is 0. The range is 32 to 32768. 15. From the Source menu, select the IP address or interface that must be used to send echo request - Netgear GS728TPv2 | User Manual - Page 524
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 4. Enter one of the following passwords: • After initial login, enter your local device password. By default, the local device password is password. You must change this password at initial login. • If you - Netgear GS728TPv2 | User Manual - Page 525
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 13. In the Port field, enter the UDP destination port for the probe packets. The default value is 33434. The range is 1-65535. 14. In the Size field, enter the size of the probe packets. The default value is 0. The - Netgear GS728TPv2 | User Manual - Page 526
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports • If you previously managed the switch through the Insight app or Cloud portal, enter the Insight network password for the last Insight network location. For information about the credentials, see Credentials for - Netgear GS728TPv2 | User Manual - Page 527
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports For information about the credentials, see Credentials for the local browser UI on page 34. 5. Click the Login button. The System Information page displays. 6. Select Maintenance > Troubleshooting default default default - Netgear GS728TPv2 | User Manual - Page 528
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports CAUTION: Make sure that the Write Core check box is cleared when you click the Apply button. Otherwise, the switch reboots. b. Click the Apply button. A - Netgear GS728TPv2 | User Manual - Page 529
A AConfiguration Examples This appendix contains the following sections: • Virtual local area networks (VLANs) • Access control lists (ACLs) • Differentiated Services (DiffServ) • 802.1X access control • Multiple Spanning Tree Protocol • VLAN routing interfaces 529 - Netgear GS728TPv2 | User Manual - Page 530
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Virtual local area networks (VLANs) A local area network (LAN) can generally be defined as a broadcast domain. Hubs, bridges, or switches in the same physical segment or segments connect all end - Netgear GS728TPv2 | User Manual - Page 531
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports • If the port is a member of the VLAN specified by the packet's VLAN ID, the packet can be sent to other ports with the same VLAN ID. • Packets leaving the switch are either tagged or untagged, depending on the - Netgear GS728TPv2 | User Manual - Page 532
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports • If an untagged packet enters port 4, the switch tags it with VLAN ID 20. The packet can access port 5 and port 6. The outgoing packet is stripped of its tag to become an untagged packet as it leaves port 6. For port - Netgear GS728TPv2 | User Manual - Page 533
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 2. On the MAC Rules page, create a rule for the Sales_ACL must be tagged with VLAN ID 2, which is the Sales department VLAN. The CoS value of the frame must be 0, which is the default value for Ethernet frames. - Netgear GS728TPv2 | User Manual - Page 534
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Basic IPv4 ACL example configuration The following example shows how to create an IPv4-based ACL that prevents any IP traffic from the Finance department from being allowed on the ports that are associated with - Netgear GS728TPv2 | User Manual - Page 535
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Differentiated Services (DiffServ) Standard IP-based networks are designed to provide best effort data delivery service. Best effort service implies that the network delivers the data in a timely fashion, - Netgear GS728TPv2 | User Manual - Page 536
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports • Secondary 802.1p priority value (second/inner VLAN tag) • Secondary VLAN ID range (second/inner VLAN tag) • IP Service Service Provisioning Policy. A policy applied to a DiffServ service level You must manually - Netgear GS728TPv2 | User Manual - Page 537
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports service level associated with a particular DiffServ traffic class. Alternatively, the IP precedence available for such packets). The DiffServ feature supports the following types of traffic policing treatments ( - Netgear GS728TPv2 | User Manual - Page 538
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports DiffServ example configuration To Source IP Address. 192.12.1.0. • Source Mask. 255.255.255.0. • Source L4 Port. Other, and enter 4567 as the source port value. • Destination IP Address. Examples 538 User Manual - Netgear GS728TPv2 | User Manual - Page 539
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 9. On the Service Configuration page, select the check box next to interfaces g7 and g8 to attach the policy to these interfaces, and then click the Apply button. (See Configure the DiffServ service interface on - Netgear GS728TPv2 | User Manual - Page 540
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports The ports of an 802.1X authenticator switch provide the means by which it can offer services to other systems reachable through the LAN. Port-based network access control allows the operation of a switch's ports to - Netgear GS728TPv2 | User Manual - Page 541
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports 802.1X example configuration This example shows how to configure the switch so that 802.1X-based authentication is required on the ports in a corporate conference room (1/0/5-1/0/8). These ports are available to - Netgear GS728TPv2 | User Manual - Page 542
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Multiple Multiple Spanning Tree Protocol (MSTP) supports multiple instances of spanning tree to efficiently channel VLAN traffic over different interfaces. Each port. Configuration Examples 542 User Manual - Netgear GS728TPv2 | User Manual - Page 543
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports An MST region comprises of one or more MSTP bridges with the same MST configuration identifier, using the same MSTIs, and without any bridges attached - Netgear GS728TPv2 | User Manual - Page 544
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Figure 4. MSTP example configuration Perform the following procedures on each switch to configure MSTP: 1. On the VLAN Configuration page, create VLANs 300 and 500 (see Configure VLAN settings on page 170). 2. On - Netgear GS728TPv2 | User Manual - Page 545
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Since the edge ports are not at risk for network loops, ports with Fast Link enabled transition directly to the forwarding state. 8. Click the Apply button. You can use the CST Port Status page to view spanning - Netgear GS728TPv2 | User Manual - Page 546
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Since a port can be configured to belong to more than one VLAN, VLAN routing might be enabled for all of the VLANs on the port, or for a subset. VLAN routing can be used to allow more than one physical port to - Netgear GS728TPv2 | User Manual - Page 547
Settings This appendix contains the following sections: • Switch default settings • General feature default settings • System setup and maintenance settings • Port characteristics • Traffic control settings • Quality of service settings • Security settings • System management settings • Settings for - Netgear GS728TPv2 | User Manual - Page 548
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Switch default settings The following table describes the switch default settings. Table 93. Switch default settings Feature IP address Subnet mask Default gateway Protocol Management VLAN ID Minimum password - Netgear GS728TPv2 | User Manual - Page 549
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Table 93. Switch default settings (continued) Feature Head of line blocking prevention Advertised port speed Broadcast storm control MAC table address aging Default VLAN ID Default VLAN name GVRP Voice VLAN Guest - Netgear GS728TPv2 | User Manual - Page 550
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Table 94. General feature default settings (continued) Feature Name/Setting Admin mode 82 Option trust mode Virtual LAN (IEEE 802.1Q) Default VLANs PVID Acceptable frame types Ingress filtering Port priority - Netgear GS728TPv2 | User Manual - Page 551
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Table 94. General feature default settings (continued spanning tree max hops MST default instance ID MST instance priority MST instance VLAN IDs STP/RSTP/MSTP, interface CST STP status CST auto edge CST fast link - Netgear GS728TPv2 | User Manual - Page 552
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Table 94. General feature default settings (continued) Feature Name/Setting GVRP, global GVRP mode GVRP, interface Port GVRP mode Link aggregation Lag name Admin mode Hash mode STP mode Link trap LAG type Local - Netgear GS728TPv2 | User Manual - Page 553
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Table 94. General feature default settings (continued) Feature Name/Setting Rate limit Burst interval Persistent configuration Store Write delay IP routing Admin mode Time-to-live Maximum next hops ARP/ARP aging - Netgear GS728TPv2 | User Manual - Page 554
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Table 94. General feature default settings (continued) Feature Name/Setting 802.1p to queue mapping (802.1p -> queue) Default (13) 001101 -> 0 (15) 001111 -> 0 Specifications and Default Settings 554 User Manual - Netgear GS728TPv2 | User Manual - Page 555
Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Table 94. General feature default settings (continued) Feature Name/Setting DSCP to queue mapping (DSCP -> queue) (continued) Class of Service -> 2 6 -> 3 7 -> 3 Specifications and Default Settings 555 User Manual - Netgear GS728TPv2 | User Manual - Page 556
48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Table 94. General feature default settings (continued) Feature Name/Setting Queue Scheduler Type Auto-VoIP, protocol-based Admin mode Prioritization type Auto-VoIP traffic class Auto-VoIP, OUI-based Admin mode Auto-VoIP VLAN - Netgear GS728TPv2 | User Manual - Page 557
48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Port characteristics The following table describes the port characteristics. Table 96. Port characteristics Feature Sets Supported Default Auto negotiating speed and full/half duplex All ports Auto negotiation Auto - Netgear GS728TPv2 | User Manual - Page 558
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Quality of service settings The following table describes the Quality of Service settings. Table 98. Quality of Service settings Feature Number of queues 802.1p DSCP Egress Rate limiting Ingress Rate limiting - Netgear GS728TPv2 | User Manual - Page 559
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports System VLANs 15 Max ARP entries 512 Number of DHCP snooping 256 bindings Default Disabled N/A Disabled Disabled Disabled Disabled N/A N/A N/A N/A Specifications and Default Settings 559 User Manual - Netgear GS728TPv2 | User Manual - Page 560
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Table 101. Settings for other features (continued) Feature Sets Supported Number of DHCP static entries 256 MLD Snooping N/A Protocol and MAC-based VLANs 128 Dynamic ARP Inspection N/A Multiple VLAN - Netgear GS728TPv2 | User Manual - Page 561
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Managed Pro Switches with 4 SFP Ports Table 102. Hardware technical specifications (continued) Feature Electromagnetic + A1:2009 + A2:2013 AN/NZS 60950.1:2015 CCC (China Compulsory Certificate) Specifications and Default Settings 561 User Manual
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
-
153
-
154
-
155
-
156
-
157
-
158
-
159
-
160
-
161
-
162
-
163
-
164
-
165
-
166
-
167
-
168
-
169
-
170
-
171
-
172
-
173
-
174
-
175
-
176
-
177
-
178
-
179
-
180
-
181
-
182
-
183
-
184
-
185
-
186
-
187
-
188
-
189
-
190
-
191
-
192
-
193
-
194
-
195
-
196
-
197
-
198
-
199
-
200
-
201
-
202
-
203
-
204
-
205
-
206
-
207
-
208
-
209
-
210
-
211
-
212
-
213
-
214
-
215
-
216
-
217
-
218
-
219
-
220
-
221
-
222
-
223
-
224
-
225
-
226
-
227
-
228
-
229
-
230
-
231
-
232
-
233
-
234
-
235
-
236
-
237
-
238
-
239
-
240
-
241
-
242
-
243
-
244
-
245
-
246
-
247
-
248
-
249
-
250
-
251
-
252
-
253
-
254
-
255
-
256
-
257
-
258
-
259
-
260
-
261
-
262
-
263
-
264
-
265
-
266
-
267
-
268
-
269
-
270
-
271
-
272
-
273
-
274
-
275
-
276
-
277
-
278
-
279
-
280
-
281
-
282
-
283
-
284
-
285
-
286
-
287
-
288
-
289
-
290
-
291
-
292
-
293
-
294
-
295
-
296
-
297
-
298
-
299
-
300
-
301
-
302
-
303
-
304
-
305
-
306
-
307
-
308
-
309
-
310
-
311
-
312
-
313
-
314
-
315
-
316
-
317
-
318
-
319
-
320
-
321
-
322
-
323
-
324
-
325
-
326
-
327
-
328
-
329
-
330
-
331
-
332
-
333
-
334
-
335
-
336
-
337
-
338
-
339
-
340
-
341
-
342
-
343
-
344
-
345
-
346
-
347
-
348
-
349
-
350
-
351
-
352
-
353
-
354
-
355
-
356
-
357
-
358
-
359
-
360
-
361
-
362
-
363
-
364
-
365
-
366
-
367
-
368
-
369
-
370
-
371
-
372
-
373
-
374
-
375
-
376
-
377
-
378
-
379
-
380
-
381
-
382
-
383
-
384
-
385
-
386
-
387
-
388
-
389
-
390
-
391
-
392
-
393
-
394
-
395
-
396
-
397
-
398
-
399
-
400
-
401
-
402
-
403
-
404
-
405
-
406
-
407
-
408
-
409
-
410
-
411
-
412
-
413
-
414
-
415
-
416
-
417
-
418
-
419
-
420
-
421
-
422
-
423
-
424
-
425
-
426
-
427
-
428
-
429
-
430
-
431
-
432
-
433
-
434
-
435
-
436
-
437
-
438
-
439
-
440
-
441
-
442
-
443
-
444
-
445
-
446
-
447
-
448
-
449
-
450
-
451
-
452
-
453
-
454
-
455
-
456
-
457
-
458
-
459
-
460
-
461
-
462
-
463
-
464
-
465
-
466
-
467
-
468
-
469
-
470
-
471
-
472
-
473
-
474
-
475
-
476
-
477
-
478
-
479
-
480
-
481
-
482
-
483
-
484
-
485
-
486
-
487
-
488
-
489
-
490
-
491
-
492
-
493
-
494
-
495
-
496
-
497
-
498
-
499
-
500
-
501
-
502
-
503
-
504
-
505
-
506
-
507
-
508
-
509
-
510
-
511
-
512
-
513
-
514
-
515
-
516
-
517
-
518
-
519
-
520
-
521
-
522
-
523
-
524
-
525
-
526
-
527
-
528
-
529
-
530
-
531
-
532
-
533
-
534
-
535
-
536
-
537
-
538
-
539
-
540
-
541
-
542
-
543
-
544
-
545
-
546
-
547
-
548
-
549
-
550
-
551
-
552
-
553
-
554
-
555
-
556
-
557
-
558
-
559
-
560
-
561
 |
 |
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
March 2020
202-12021-03
User Manual
24-Port and 48-Port Gigabit Ethernet PoE+
Smart Managed Pro Switches
with 4 SFP Ports
Models
GS728TPv2, GS728TPPv2,
GS752TPv2, and GS752TPP
User Manual