Netgear GS752TS GS7xxTS-TPS Hardware Installation Guide - Page 16

GS728TS, GS728TPS, GS752TS, and GS752TPS Smart Switch Hardware Installation Guide GS752TPS Front-Panel and Back-Panel Configuration The GS752TPS Smart Switch has 48 10/100/1000 Mbps PoE capable copper ports and 6 SFP fiber ports, 2 of which are combo ports. Up to two SFP ports (port 51 and 52) at a time can be used as stacking ports. Each port is capable of sensing the line speed and negotiating the duplex mode with the link partner automatically. Figure 8 illustrates the front panel of the NETGEAR GS752TPS Smart Switch. Power, Fan, LED mode, PoE Max, and Stack Master LEDs Stack ID LED Select Button Link/Speed/ACT LEDs Combo and Dedicated SFP Ports Factory Defaults Button 10/100/1000M PoE capable Ethernet Ports Reset Button Figure 8. GS752TPS Front Panel The front panel contains the following: • 48 RJ-45 connectors for 10/100/1000 Mbps autosensing Gigabit Ethernet switching ports. • 2 Combo ports (port 47 and 48) to support 10/100/1000 Mbps copper or 100M/1G optical module. • 2 dedicated SFP ports (port 49 and 50) to support 1G optical module. • 2 dedicated SFP ports (port 51 and 52) to support 1G optical module (uplink) or 2.5G stacking (via stacking cable). • Up to two of these ports (ports 51 and 52) can alternatively be used as stacking ports • Reset button to restart the device. • Select button to change the working mode of the port LEDs with either PoE Mode or Ethernet Mode. • Recessed default reset button to restore the device back to the factory defaults • Link, Speed, and Activity LEDs for each port. • Power, Fan Status, Stack Master, LED mode, PoE Max, and Stack ID LEDs. Figure 9 illustrates the NETGEAR GS752TPS Smart Switch back panel. 16 | Chapter 2. Physical Description