Netgear GSM5212P GSM5212P/GSM7212P/GSM7212F/GSM7224P Installation Guide - Page 2
Technical Support
View all Netgear GSM5212P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
GSMManaged_IG 26Oct11.fm Page 2 Wednesday, October 26, 2011 12:48 PM User:admin Password: (switch) >ezconfig NETGEAR EZ Configuration Utility Hello and Welcome! This utility will walk you thru assigning the IP address for the switch management CPU. It will allow you to save the changes at the end. After the session, simply use the newly assigned IP address to access the Web GUI using any public domain Web browser. Admin password not defined. Do you want to change the password? (Y/N/Q) n The 'enable' password required for switch configuration via the command line interface is currently not configured. Do you wish to change it (Y/N/Q)? n Assigning an IP address to your switch management Current IP Address Configuration IP Address Assignment Mode: DHCP IP Address: 0.0.0.0 Subnet mask: 0.0.0.0 Would you like to assign an IP address now? (Y/D/N/Q/?)? y IP Address: 10.10.10.1 Network mask: 255.255.255.0 Do you want to assign switch name and location information (Y/N/Q)? n There are changes detected, do you wish to save the changes permanently (Y/N)? y The configuration changes have been saved successfully. Please enter 'show running-config' to see the final configuration. Thanks for using EzConfig! 7. Use this IP value to log in to the switch (see Web Login to the Switch). For information about how to perform extensive CLI management, see both the CLI Reference Manual for your switch and the Software Administration Guide. PC in DHCP Client Mode with DHCP Server By default, the switch is configured as a DHCP client to obtain its IP address from a DHCP server in the connected network. You need to access the switch from the serial console port. 1. Make sure that the switch is connected to a DHCP server. October 2011 2. Find the switch IP address assigned by the DHCP server. a. Perform steps 1 through 3 of the procedure PC with Static IP Address. b. Type the show network command, and press Enter. A screen displays that shows the active switch IP address. c. Use this IP address to log in to the switch through its web management interface (see Web Login to the Switch). Web Login to the Switch Use the appropriate IP address for your configuration to manage your switch through its web interface. 1. Type http:// into the URL field of your browser. A screen similar to the following displays. 2. Type admin for the user name, and leave the password field blank. 3. Click Login. The System Information screen display. You can now navigate from this point to configure your switch. Technical Support Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label of your product and use it to register your product at http://www.NETGEAR.com/register. Registration is required before you can use the telephone support service. Registration through the website is strongly recommended. Go to http://kbserver.netgear.com for product updates and Web support. For warranty and regional customer support information, see the Resource CD that came with your product. For complete DoC please visit the NETGEAR EU Declarations of Conformity website at: http://kb.netgear.com/app/answers/detail/a_id/11621/. For GNU General Public License (GPL) related information, please visit http://support.netgear.com/app/answers/detail/a_id/2649. WARNING!! Do not stack equipment, or place equipment in tight spaces, or in drawers. Be sure your equipment is surrounded by at least 2 inches of air space. This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union, this product should be treated and recycled in accordance with the laws of your jurisdiction implementing the WEEE Directive. ©2011 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registered trademarks of NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice.