Netgear GSM7212F GSM5212P/GSM7212P/GSM7212F/GSM7224P Administration Manual - Page 355

23. DHCPv6 Server 23 This chapter provides the following examples: • CLI: Configure DHCPv6 on page 357 • Web Interface: Configure an Inter-area Router on page 358 • Configure Stateless DHCPv6 Server on page 362 Dynamic Host Configuration Protocol for IPv6 (DHCPv6) is used to assign IPv6 addresses statefully and distribute other configuration information such as domain name or DNS server. Although DHCPv6 supports stateful address allocation, prefix delegation and stateless services, only prefix delegation mode and stateless service are supported on managed switches. This chapter shows how to configure prefix delegation mode using DHCPv6 pool. When create a DHCPv6 pool, user needs to assign a prefix to client DUID. DUID is used to identify the client's unique duid value. The format is xx:xx:xx:xx:xx:xx. RFC3315 defines three types: a. Link-layer address plus time: • 00:01:hardware type:time:link-layer address • Hardware type - 16 bit hardware type reserved by IANA. 1 means an Ethernet device. • Time: 32-bit unsigned integer. The time in seconds when this DUID was generated since 00:00:00 1/1/2000. • Link-layer address - The link layer address of a device generating the DUID. b. Vendor-assigned unique ID based on Enterprise Number: • 00:02:enterprise-number:identifier • Enterprise-number - 32-bit integer reserved by IANA. • Identifier - Variable length data for each vendor c. Link-layer address: • 00:03:hardware type:link-layer address • Hardware type - 16 bit hardware type reserved by IANA. 1 means an Ethernet device. • Link-layer address - The link layer address of a device generating the DUID. Chapter 23. DHCPv6 Server | 355