Netgear GSM7224v1 GSM7212 Command line reference manual - Page 97
spanning-tree mst vlan, spanning-tree port mode, spanning-tree port mode all
View all Netgear GSM7224v1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver- 5.1.15 spanning-tree mst vlan This command adds an association between a multiple spanning tree instance and a VLAN so that the VLAN is no longer associated with the common and internal spanning tree. The parameter is a number that corresponds to the desired existing multiple spanning tree instance. The corresponds to an existing VLAN ID. Format spanning-tree mst vlan Mode Global Config 5.1.15.1 no spanning-tree mst vlan This command removes an association between a multiple spanning tree instance and a VLAN so that the VLAN is again be associated with the common and internal spanning tree. The parameter is a number that corresponds to the desired existing multiple spanning tree instance. The corresponds to an existing VLAN ID. Format no spanning-tree mst vlan Mode Global Config 5.1.16 spanning-tree port mode This command sets the Administrative Switch Port State for this port to enabled. Default disabled Format spanning-tree port mode Mode Interface Config 5.1.16.1 no spanning-tree port mode This command sets the Administrative Switch Port State for this port to disabled. Format no spanning-tree port mode Mode Interface Config 5.1.17 spanning-tree port mode all This command sets the Administrative Switch Port State for all ports to enabled. Default disabled Format spanning-tree port mode all Mode Global Config Spanning Tree Protocol Commands 5-9 v1.0, February 2007