Netgear GSM7224v2 GSM72XXv2 Hardware Installation Guide - Page 13
GSM7248 Rear Panel, Interpreting the LEDs, Table 1-1., LED Descriptions
![]() |
View all Netgear GSM7224v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Managed Layer 2 Switches GSM7224 and GSM7248 Hardware Installation Guide GSM7248 Rear Panel The rear panel has a console port, a redundant power supply connector, and a standard AC power receptacle for the supplied power cord. Console Figure 1-4 Redundant power supply connector Interpreting the LEDs Power receptacle The following table describes the LEDs on the front panel of the switch. Table 1-1. LED Descriptions LED PWR (power) FAN RPS (redundant power supply) Description • Solid green. Power is supplied and the switch is working. • Blinking green. Power-on self-test (POST) in progress. • Solid yellow. System is booting up. • Blinking yellow. POST, CPU, or power supply has failed • Off. Power is disconnected. • Yellow. The fan has failed. • Off. The fan is operating normally. • Solid green. The redundant power supply is connected (and using internal power). • Solid yellow. The switch internal power has failed or been disconnected, but the redundant power supply is providing power to the switch. • Blinking yellow. The redundant power supply unit is present, but the power has failed. • Off. The redundant power supply is disconnected or not present. Introduction 1-3 v1.0, July 2009
![](/manual_guide/products/netgear-gsm7224v2-gsm72xxv2-hardware-installation-guide-a0ff152/13.png)