Netgear GSM7328SO GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guide - Page 13

Managed Stackable Layer 3 Switches GSM7328S, GSM7352S and GSM7328FS Hardware Instal- Table 2-1. LED Descriptions for GSM7328S (continued) LED Description M1, M2, M3, M4 High-Speed I/O Modules (1 LED per module) XFP Module present or Stacking Adapter present and ACT LED: XFP Module present LED /ACT • Off: The 10GbE Adapter is not present. • Solid green: The 10GbE Adapter is present. • Blinking green: Packets transmission or reception is occurring on the port Stacking Adapter Link/ACT LED • Off: Stacking module is not present . • Solid green: Stacking module is present . • Blinking green: Packets transmission or reception is occurring on the port . 10/100/1000M Ports (2 LEDs per port) Link/ACT LED • Off: No link is established on the port. • Solid green: A valid link is established on the port. • Blinking green: The port is sending or receiving packets. SPD LED • Off: No link or a valid 10M link is established on the port. • Solid yellow: A valid 100 Mbps link is established on the port. • Solid green: A valid 1000 Mbps link is established on the port. Note: If port 21-24 media is changed to SFP, the RJ-45 LEDs l change to OFF status. SFP Ports (1Link/ACT LED per port) • Off: No SFP module link is established on the port. • Solid green: A valid SFP module link is established on the port. • Blinking green: The port is sending or receiving packets. Note. If port 21-24 media is changed to copper, the SFP LEDs change to OFF status. Introduction 2-3 v1.0, February 2007