Home » Netgear Manuals » Hubs & Switches » Netgear GSM7328Sv1 » Manual Viewer

Netgear GSM7328Sv1 7000 Series Managed Switch version 8.0 CLI Reference Manual - Page 54

external-cost, port-priority

Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

Managed Switch CLI Manual, Release 8.0 If you specify the cost option, the command sets the path cost for this port within a multiple spanning tree instance or the common and internal spanning tree instance, depending on the parameter. You can set the path cost as a number in the range of 1 to 200000000 or auto. If you select auto the path cost value is set based on Link Speed. If you specify the external-cost option, this command sets the external-path cost for MST instance '0' i.e. CIST instance. You can set the external cost as a number in the range of 1 to 200000000 or auto. If you specify auto, the external path cost value is set based on Link Speed. If you specify the port-priority option, this command sets the priority for this port within a specific multiple spanning tree instance or the common and internal spanning tree instance, depending on the parameter. The port-priority value is a number in the range of 0 to 240 in increments of 16. Default Format Mode • cost-auto • external-cost-auto • port-priority-128 spanning-tree mst {{cost | auto} | {external- cost | auto} | port-priority } Interface Config no spanning-tree mst This command sets the Path Cost or Port Priority for this port within the multiple spanning tree instance, or in the common and internal spanning tree to the respective default values. If you specify an parameter that corresponds to an existing multiple spanning tree instance, you are configuring that multiple spanning tree instance. If you specify 0 (defined as the default CIST ID) as the , you are configuring the common and internal spanning tree instance. If the you specify cost, this command sets the path cost for this port within a multiple spanning tree instance or the common and internal spanning tree instance, depending on the parameter, to the default value, i.e. a path cost value based on the Link Speed. If you specify external-cost, this command sets the external path cost for this port for mst '0' instance, to the default value, i.e. a path cost value based on the Link Speed. If you specify port-priority, this command sets the priority for this port within a specific multiple spanning tree instance or the common and internal spanning tree instance, depending on the parameter, to the default value. Switching Commands v1.0, July 2009 3-18

Section	Page
ProSafe 7300S Managed Switches CLI Manual, Version 8.0	1
About This Manual	4
Audience	4
About Managed Switch Software	4
Scope	5
Conventions and Formats	6
How to Print This Manual	7
Revision History	7
Contents	8
Chapter 1 Using the Command-Line Interface	13
Command Syntax	13
Command Conventions	14
Common Parameter Values	15
Unit/Slot/Port Naming Convention	15
Using the “No” Form of a Command	16
Managed Switch Modules	17
Command Modes	17
Command Completion and Abbreviation	21
CLI Error Messages	21
CLI Line-Editing Conventions	22
Using CLI Help	23
Accessing the CLI	24
Chapter 2 Stacking Commands	25
Dedicated Port Stacking	25
Front Panel Stacking Commands	34
Chapter 3 Switching Commands	37
Port Configuration Commands	38
Spanning Tree Protocol (STP) Commands	47
VLAN Commands	67
Double VLAN Commands	82
Voice VLAN Commands	84
Provisioning (IEEE 802.1p) Commands	87
Protected Ports Commands	88
Private Group Commands	90
GARP Commands	92
GVRP Commands	95
GMRP Commands	97
Port-Based Network Access Control Commands	100
Storm-Control Commands	114
Port-Channel/LAG (802.3ad) Commands	126
Port Mirroring	149
Static MAC Filtering	151
DHCP Snooping Configuration Commands	156
Dynamic ARP Inspection Commands	167
IGMP Snooping Configuration Commands	175
IGMP Snooping Querier Commands	184
MLD Snooping Commands	189
MLD Snooping Querier Commands	198
Port Security Commands	202
LLDP (802.1AB) Commands	206
LLDP-MED Commands	217
Denial of Service Commands	228
MAC Database Commands	240
ISDP Commands	242
Chapter 4 Routing Commands	249
Address Resolution Protocol (ARP) Commands	249
IP Routing Commands	256
Router Discovery Protocol Commands	268
Virtual LAN Routing Commands	272
Virtual Router Redundancy Protocol Commands	273
DHCP and BOOTP Relay Commands	282
IP Helper Commands	285
Open Shortest Path First (OSPF) Commands	287
Routing Information Protocol (RIP) Commands	330
ICMP Throttling Commands	339
Chapter 5 IP Multicast Commands	342
Multicast Commands	342
DVMRP Commands	348
PIM-DM Commands	353
PIM-SM Commands	357
Internet Group Message Protocol (IGMP) Commands	367
IGMP Proxy Commands	376
Chapter 6 IPv6 Multicast Commands	382
IPv6 Multicast Forwarder	383
IPv6 PIM-DM Commands	385
IPv6 PIM-SM Commands	389
IPv6 MLD Commands	397
IPv6 MLD-Proxy Commands	404
Chapter 7 IPv6 Commands	411
IPv6 Management Commands	412
Tunnel Interface Commands	416
Loopback Interface Commands	418
IPv6 Routing Commands	420
OSPFv3 Commands	443
DHCPv6 Commands	478
Chapter 8 Quality of Service (QoS) Commands	488
Class of Service (CoS) Commands	489
Differentiated Services (DiffServ) Commands	495
DiffServ Class Commands	497
DiffServ Policy Commands	506
DiffServ Service Commands	512
DiffServ Show Commands	513
MAC Access Control List (ACL) Commands	519
IP Access Control List (ACL) Commands	524
IPv6 Access Control List (ACL) Commands	531
Auto-Voice over IP Commands	535
Chapter 9 Utility Commands	538
Auto Install Commands	539
Dual Image Commands	541
System Information and Statistics Commands	543
Logging Commands	555
System Utility and Clear Commands	561
Simple Network Time Protocol (SNTP) Commands	571
DHCP Server Commands	577
DNS Client Commands	592
Packet Capture Commands	598
Serviceability Packet Tracing Commands	600
Cable Test Command	620
sFlow Commands	621
Chapter 10 Management Commands	627
Configuring the Switch Management CPU	628
Network Interface Commands	630
Console Port Access Commands	634
Telnet Commands	637
Secure Shell (SSH) Commands	642
Management Security Commands	645
Hypertext Transfer Protocol (HTTP) Commands	646
Access Commands	654
User Account Commands	655
SNMP Commands	666
RADIUS Commands	678
TACACS+ Commands	693
Configuration Scripting Commands	697
Pre-login Banner and System Prompt Commands	699
Chapter 11 Log Messages	701
Core	701
Utilities	704
Management	706
Switching	710
QoS	716
Routing/IPv6 Routing	717
Multicast	721
Stacking	723
Technologies	723
O/S Support	726
Chapter 12 Captive Portal Commands	728
Capitve Portal Global Commands	728
Captive Portal Configuration Commands	732
Captive Portal Status Commands	741
Captive Portal Client Connection Commands	746
Captive Portal Interface Commands	750
Captive Portal Local User Commands	751
Captive Portal User Group Commands	758
Chapter 13 List of Commands	760
{deny \| permit} (IP ACL) 8-40	760
{deny \| permit} (IPv6) 8-45	760
{deny \| permit} (MAC ACL) 8-34	760
1583compatibility 4-41	760
aaa authentication dot1x 10-39	760
aaa authentication login 10-37	760
aaa authenticaton enable 10-38	760
access-list 8-37	760
acl-trapflags 8-42	760
addport 3-92	760
area default-cost (OSPF) 4-41	760
area default-cost (OSPFv3) 7-38	760
area nssa (OSPF) 4-42	760
area nssa (OSPFv3) 7-38	760
area nssa default-info-originate (OSPF) 4-42	760
area nssa default-info-originate (OSPFv3) 7-39	760
area nssa no-redistribute (OSPF) 4-43	760
area nssa no-redistribute (OSPFv3) 7-39	760
area nssa no-summary (OSPF) 4-43	760
area nssa no-summary (OSPFv3) 7-40	760
area nssa translator-role (OSPF) 4-44	760
area nssa translator-role (OSPFv3) 7-40	760
area nssa translator-stab-intv (OSPF) 4-44	760
area nssa translator-stab-intv (OSPFv3) 7-40	760
area range (OSPF) 4-45	760
area range (OSPFv3) 7-41	760
area stub (OSPF) 4-45	760
area stub (OSPFv3) 7-41	760
area stub no-summary (OSPF) 4-46	760
area stub no-summary (OSPFv3) 7-42	760
area virtual-link (OSPF) 4-46	760
area virtual-link (OSPFv3) 7-42	760
area virtual-link authentication 4-47	760
area virtual-link dead-interval (OSPF) 4-47	761
area virtual-link dead-interval (OSPFv3) 7-43	761
area virtual-link hello-interval (OSPF) 4-48	761
area virtual-link hello-interval (OSPFv3) 7-43	761
area virtual-link retransmit-interval (OSPF) 4-48	761
area virtual-link retransmit-interval (OSPFv3) 7-44	761
area virtual-link transmit-delay (OSPF) 4-49	761
area virtual-link transmit-delay (OSPFv3) 7-44	761
arp 4-2	761
arp access-list 3-135	761
arp cachesize 4-3	761
arp dynamicrenew 4-3	761
arp purge 4-4	761
arp resptime 4-4	761
arp retries 4-4	761
arp timeout 4-5	761
assign-queue 8-20	761
authentication timeout 12-3	761
authorization network radius 10-52	761
auto-cost (OSPF) 4-49	761
auto-cost (OSPFv3) 7-45	761
auto-negotiate 3-3	761
auto-negotiate all 3-4	761
auto-summary 4-83	761
auto-voip 8-49	761
auto-voip all 8-48	761
bandwidth 4-50	761
block 12-14	761
boot autoinstall auto-save 9-3	761
boot autoinstall retry-count 9-4	761
boot autoinstall start 9-3	761
boot autoinstall stop 9-3	761
boot system 9-5	761
bootfile 9-45	761
bootpdhcprelay cidoptmode 4-34	761
bootpdhcprelay maxhopcount 4-34	761
bootpdhcprelay minwaittime 4-35	761
bridge aging-time 3-204	761
cablestatus 9-83	761
capability opaque 4-51	761
captive-portal client deauthenticate 12-23	762
captive-portal 12-1	762
capture wrap 9-62	762
class 8-21	762
class-map 8-10	762
class-map rename 8-11	762
classofservice dot1p-mapping 8-2	762
classofservice ip-dscp-mapping 8-2	762
classofservice trust 8-3	762
clear arp-cache 4-5	762
clear arp-switch 4-6	762
clear captive-portal users 12-31	762
clear config 9-27	762
clear counters 9-27	762
clear dot1x statistics 3-64	762
clear host 9-59	762
clear igmpsnooping 9-28	762
clear ip arp inspection statistics 3-138	762
clear ip dhcp binding 9-51	762
clear ip dhcp conflict 9-51	762
clear ip dhcp server statistics 9-51	762
clear ip dhcp snooping binding 3-129	762
clear ip dhcp snooping statistics 3-129	762
clear ip ospf 4-51	762
clear ip ospf configuration 4-51	762
clear ip ospf counters 4-51	762
clear ip ospf neighbor 4-52	762
clear ip ospf neighbor interface 4-52	762
clear ip ospf redistribution 4-52	762
clear ip route all 4-13	762
clear ipv6 dhcp 7-75	762
clear ipv6 neighbors 7-24	762
clear ipv6 ospf 7-46	762
clear ipv6 ospf configuration 7-46	762
clear ipv6 ospf counters 7-46	762
clear ipv6 ospf neighbor 7-46	762
clear ipv6 ospf neighbor interface 7-47	762
clear ipv6 ospf redistribution 7-47	762
clear ipv6 statistics 7-32	762
clear isdp counters 3-208	762
clear isdp table 3-208	763
clear lldp remote-data 3-175	763
clear lldp statistics 3-174	763
clear logging buffered 9-27	763
clear mac-addr-table 9-27	763
clear pass 9-28	763
clear port-channel 9-28	763
clear radius statistics 3-64	763
clear traplog 9-28	763
clear vlan 9-28	763
client-identifier 9-41	763
client-name 9-42	763
clock timezone 9-37	763
configuration 10-8	763
configuration (Captive Portal) 12-5	763
conform-color 8-21	763
copy 9-32	763
copy (pre-login banner) 10-73	763
cos-queue min-bandwidth 8-4	763
cos-queue strict 8-4	763
crypto certificate generate 10-19	763
crypto key generate dsa 10-20	763
crypto key generate rsa 10-20	763
debug arp 9-63	763
debug auto-voip 9-63	763
debug clear 9-64	763
debug console 9-64	763
debug dot1x packet 9-65	763
debug igmpsnooping packet 9-65	763
debug igmpsnooping packet receive 9-67	763
debug igmpsnooping packet transmit 9-66	763
debug ip acl 9-68	763
debug ip dvmrp packet 9-68	763
debug ip igmp packet 9-69	763
debug ip mcache packet 9-69	763
debug ip pimdm packet 9-70	763
debug ip pimsm packet 9-71	763
debug ip vrrp 9-71	763
debug ipv6 mcache packet 9-72	763
debug ipv6 mld packet 9-72	763
debug ipv6 pimdm packet 9-73	764
debug ipv6 pimsm packet 9-73	764
debug isdp packet 3-212	764
debug lacp packet 9-74	764
debug mldsnooping packet 9-74	764
debug ospf packet 9-75	764
debug ospfv3 packet 9-77	764
debug ping packet 9-78	764
debug rip packet 9-79	764
debug sflow packet 9-80	764
debug spanning-tree bpdu 9-80	764
debug spanning-tree bpdu receive 9-81	764
debug spanning-tree bpdu transmit 9-82	764
default-information originate (OSPF) 4-53	764
default-information originate (OSPFv3) 7-47	764
default-information originate (RIP) 4-84	764
default-metric (OSPF) 4-53	764
default-metric (OSPFv3) 7-48	764
default-metric (RIP) 4-84	764
default-router 9-42	764
delete 9-4	764
deleteport (Global Config) 3-92	764
deleteport (Interface Config) 3-92	764
description 3-5	764
diffserv 8-9	764
disconnect 10-28	764
distance ospf (OSPF) 4-54	764
distance ospf (OSPFv3) 7-48	764
distance rip 4-84	764
distribute-list out (OSPF) 4-54	764
distribute-list out (RIP) 4-85	764
dns-server 9-43	764
dns-server (IPv6) 7-72	764
domain-name 9-46	764
domain-name (IPv6) 7-71	764
dos-control all 3-193	764
dos-control firstfrag 3-194	764
dos-control icmp 3-196	764
dos-control icmpfrag 3-202	764
dos-control icmpv4 3-201	764
dos-control icmpv6 3-202	765
dos-control l4port 3-195	765
dos-control sipdip 3-193	765
dos-control smacdmac 3-196	765
dos-control tcpfinurgpsh 3-200	765
dos-control tcpflag 3-195	765
dos-control tcpflagseq 3-198	765
dos-control tcpfrag 3-194	765
dos-control tcpoffset 3-199	765
dos-control tcpport 3-197	765
dos-control tcpsyn 3-199	765
dos-control tcpsynfin 3-200	765
dos-control udpport 3-197	765
dot1x guest-vlan 3-65	765
dot1x initialize 3-65	765
dot1x max-req 3-66	765
dot1x max-users 3-66	765
dot1x port-control 3-67	765
dot1x port-control all 3-67	765
dot1x re-authenticate 3-68	765
dot1x re-authentication 3-68	765
dot1x system-auth-control 3-69	765
dot1x timeout 3-69	765
dot1x unauthenticated-vlan 3-70	765
dot1x user 3-71	765
drop 8-20	765
dvlan-tunnel ethertype 3-46	765
enable (OSPF) 4-39	765
enable (OSPFv3) 7-49	765
enable (Privileged EXEC access) 10-4	765
enable (RIP) 4-82	765
enable authentication 10-10	765
enable password 9-29	765
enable 12-1	765
enable (Instance) 12-6	765
encapsulation 4-13	765
exit-overflow-interval (OSPF) 4-55	765
exit-overflow-interval (OSPFv3) 7-49	765
external-lsdb-limit (OSPF) 4-55	765
external-lsdb-limit (OSPFv3) 7-50	765
ezconfig 10-2	766
filedescr 9-5	766
group 12-8	766
hardware-address 9-43	766
hashing-mode 3-107	766
host 9-44	766
hostroutesaccept 4-87	766
http port 12-2	766
https port 12-2	766
idle-timeout 12-12	766
interface 3-2	766
interface (Captive Portal) 12-13	766
interface lag 3-3	766
interface loopback 7-8	766
interface range 3-3	766
interface tunnel 7-6	766
interface vlan 3-3	766
ip access-group 8-41	766
ip access-list 8-39	766
ip access-list rename 8-40	766
ip address 4-9	766
ip arp inspection filter 3-134	766
ip arp inspection limit 3-133	766
ip arp inspection trust 3-133	766
ip arp inspection validate 3-132	766
ip arp inspection vlan 3-131	766
ip arp inspection vlan logging 3-132	766
ip dhcp bootp automatic 9-50	766
ip dhcp conflict logging 9-50	766
ip dhcp excluded-address 9-48	766
ip dhcp ping packets 9-49	766
ip dhcp pool 9-41	766
ip dhcp snooping 3-120	766
ip dhcp snooping binding 3-122	766
ip dhcp snooping database 3-121	766
ip dhcp snooping database write-delay 3-122	766
ip dhcp snooping limit 3-123	766
ip dhcp snooping log-invalid 3-124	766
ip dhcp snooping trust 3-124	766
ip dhcp snooping verify mac-address 3-121	766
ip dhcp snooping vlan 3-120	767
ip domain list 9-56	767
ip domain lookup 9-55	767
ip domain name 9-56	767
ip domain retry 9-58	767
ip domain timeout 9-59	767
ip dvmrp 5-8	767
ip dvmrp metric 5-7	767
ip dvmrp trapflags 5-8	767
ip dvmrp(Global Config) 5-7	767
ip helper-address 4-37	767
ip helper-address (Global Config) 4-36	767
ip helper-address discard 4-38	767
ip host 9-57	767
ip http authentication 10-23	767
ip http java 10-22	767
ip http secure-port 10-26	767
ip http secure-protocol 10-27	767
ip http secure-server 10-21	767
ip http secure-session hard-timeout 10-25	767
ip http secure-session maxsessions 10-24	767
ip http secure-session soft-timeout 10-25	767
ip http server 10-21	767
ip http session hard-timeout 10-22	767
ip http session maxsessions 10-23	767
ip http session soft-timeout 10-24	767
ip https authentication 10-26	767
ip icmp echo-reply 4-92	767
ip icmp error-interval 4-92	767
ip igmp 5-26	767
ip igmp last-member-query-count 5-27	767
ip igmp last-member-query-interval 5-28	767
ip igmp query-interval 5-28	767
ip igmp query-max-response-time 5-29	767
ip igmp robustness 5-29	767
ip igmp startup-query-count 5-30	767
ip igmp startup-query-interval 5-30	767
ip igmp version 5-27	767
ip igmp-proxy 5-35	767
ip igmp-proxy reset-status 5-36	767
ip igmp-proxy unsolicit-rprt-interval 5-35	768
ip igmpsnooping unknown-multicast 3-145	768
ip irdp 4-20	768
ip irdp address 4-21	768
ip irdp holdtime 4-21	768
ip irdp maxadvertinterval 4-22	768
ip irdp minadvertinterval 4-22	768
ip irdp preference 4-23	768
ip mcast boundary 5-2	768
ip mtu 4-12	768
ip multicast 5-2	768
ip multicast ttl-threshold 5-3	768
ip name server 9-57	768
ip netdirbcast 4-11	768
ip ospf area 4-40	768
ip ospf authentication 4-56	768
ip ospf cost 4-56	768
ip ospf dead-interval 4-57	768
ip ospf hello-interval 4-57	768
ip ospf mtu-ignore 4-60	768
ip ospf network 4-58	768
ip ospf priority 4-58	768
ip ospf retransmit-interval 4-59	768
ip ospf transmit-delay 4-59	768
ip pimdm (Global Config) 5-12	768
ip pimdm (Interface Config) 5-13	768
ip pimdm hello-interval 5-13	768
ip pimsm bsr-border 5-17	768
ip pimsm bsr-candidate 5-17	768
ip pimsm dr-priority 5-18	768
ip pimsm hello-interval 5-19	768
ip pimsm join-prune-interval 5-19	768
ip pimsm register-threshold 5-20	768
ip pimsm rp-address 5-20	768
ip pimsm rp-candidate 5-21	768
ip pimsm spt-threshold 5-21	768
ip pimsm ssm 5-22	768
ip pimsm(Global Config) 5-16	768
ip pimsm(Interface Config) 5-16	768
ip pim-trapflags 5-22	768
ip proxy-arp 4-2	769
ip redirects 4-91	769
ip rip 4-83	769

Match case Limit results 1 per page

Managed Switch CLI Manual, Release 8.0

Switching Commands

3-18

v1.0, July 2009

If you specify the

cost

option, the command sets the path cost for this port within a multiple

spanning tree instance or the common and internal spanning tree instance, depending on the

<mstid>

parameter. You can set the path cost as a number in the range of 1 to 200000000 or

auto

. If you select

auto

the path cost value is set based on Link Speed.

If you specify the

external-cost

option, this command sets the external-path cost for MST instance

‘0’ i.e. CIST instance. You can set the external cost as a number in the range of 1 to 200000000 or

auto

. If you specify auto, the external path cost value is set based on Link Speed.

If you specify the

port-priority

option, this command sets the priority for this port within a

specific multiple spanning tree instance or the common and internal spanning tree instance,

depending on the

<mstid>

parameter. The port-priority value is a number in the range of 0 to 240

in increments of 16.

no spanning-tree mst

This command sets the Path Cost or Port Priority for this port within the multiple spanning tree

instance, or in the common and internal spanning tree to the respective default values. If you

specify an

<mstid>

parameter that corresponds to an existing multiple spanning tree instance,

you are configuring that multiple spanning tree instance. If you specify 0 (defined as the default

CIST ID) as the

<mstid>

, you are configuring the common and internal spanning tree instance.

If the you specify

cost

, this command sets the path cost for this port within a multiple spanning

tree instance or the common and internal spanning tree instance, depending on the

<mstid>

parameter, to the default value, i.e. a path cost value based on the Link Speed.

If you specify

external-cost

, this command sets the external path cost for this port for mst ‘0’

instance, to the default value, i.e. a path cost value based on the Link Speed.

If you specify

port-priority

, this command sets the priority for this port within a specific multiple

spanning tree instance or the common and internal spanning tree instance, depending on the

<mstid>

parameter, to the default value.

Default

•

cost—auto

•

external-cost—auto

•

port-priority—128

Format

spanning-tree mst

mstid> {{cost <1-200000000> | auto} | {external-

cost <1-200000000> | auto} | port-priority <0-240>}

Mode

Interface Config