Netgear GSM7328Sv2 GSM7328Sv2/GSM7352Sv2 Series Managed Switch Hardware Instal - Page 16
Table, GSM7352S v2 LED Description continued
View all Netgear GSM7328Sv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Managed Stackable Layer 3 Switches GSM7328S v2 and GSM7352S v2 Hardware Installation Table 2-2. GSM7352S v2 LED Description (continued) LED M1, M2 High-Speed I/O Modules (1 LED per module) SFP ports SFP+ Ports (1 Link/ACT LED per port) Description XFP Module present or Stacking Adapter present and ACT LED XFP Module present LED /ACT • Off: The 10GbE Adapter is not present or present but link down with system. • Solid green: The 10GbE Adapter is present and link up with system. • Blinking green: Packets transmission or reception is occurring on the port. Stacking Adapter Link/ACT LED • Off: Stacking module is not present or present but link down wih system. • Solid green: Stacking module is present and link up with system. • Blinking green: Packets transmission or reception is occurring on the port. • Off: No SFP module link is established on the port. • Solid green: A valid 1000Mbps SFP module link is established on the port. • Blinking green: Packet transmission or reception is occurring on the port at 1000Mbps. • Solid yellow: A valid 100Mbps SFP module link is established on the port. • Blinking yellow: Packet transmission or reception is occurring on the port at 100Mbps. Note: If port 43~48 media is changed to copper, the SFP LEDs change to OFF status. SPD/Link/ACT LED: • OFF: No SFP module link is established on the port. • Solid green: A valid 10Gbps SFP+ module link is established on the port. • Blinking green:Packet transmission or reception is occurring on the port at 10Gbps. 2-6 Introduction v1.0, July 2009