Netgear GSM7352S FSM7328PS Command line reference manual - Page 199
radius server host
UPC - 606449068078
View all Netgear GSM7352S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 199 highlights
Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches, 11.2.1.1 no radius accounting mode Use this command to disable the RADIUS accounting function. Format no radius accounting mode Mode Global Config 11.2.2 radius server host Use this command to configure the RADIUS authentication and accounting server. If you use the parameter, the command configures the IP address to use to connect to a RADIUS authentication server. You can configure up to 3 servers per RADIUS client. If the maximum number of configured servers is reached, the command fails until you remove one of the servers by issuing the "no" form of the command. If you use the optional parameter, the command configures the UDP port number to use when connecting to the configured RADIUS server. The number range is 1 - 65535, with 1812 being the default value. Note: To re-configure a RADIUS authentication server to use the default UDP , set the parameter to 1812. If you use the parameter, the command configures the IP address to use for the RADIUS accounting server. You can only configure one accounting server. If an accounting server is currently configured, use the "no" form of the command to remove it from the configuration. The IP address you specify must match that of a previously configured accounting server. If you use the optional parameter, the command configures the UDP port to use when connecting to the RADIUS accounting server. If a is already configured for the accounting server, the new replaces the previously configured . The must be a value in the range 1 - 65535, with 1813 being the default. Note: To re-configure a RADIUS accounting server to use the default UDP , set the parameter to 1813. Format Mode radius server host {auth | acct} [] Global Config Port-Based Access and Authentication Commands v3.0, January 2008 11-15