Netgear GSM7352SNA GSM7328S, GSM7352S and GSM7328FS Hardware Installation Guid - Page 24
Protecting Against Electrostatic Discharge, Unpacking the Hardware
UPC - 606449043013
View all Netgear GSM7352SNA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Managed Stackable Layer 3 Switches GSM7328S, GSM7352S and GSM7328FS Hardware Instal- Protecting Against Electrostatic Discharge Warning: Static electricity can harm delicate components inside your system. To prevent static damage, discharge static electricity from your body before you touch any of the electronic components, such as the microprocessor. You can do so by periodically touching an unpainted metal surface on the switch. You can also take the following steps to prevent damage from electrostatic discharge (ESD): 1. When unpacking a static-sensitive component from its shipping carton, leave it in the antistatic package until you are ready to install it. Just before unwrapping the antistatic package, discharge static electricity from your body. 2. Before moving a sensitive component, place it in an antistatic container or package. 3. Handle all sensitive components in a static-safe area. If possible, use antistatic floor pads, workbench pads, and an antistatic grounding strap. Unpacking the Hardware Check the contents of the boxes to make sure that all items are present before beginning the installation. 1. Place the container on a clean flat surface and cut all straps securing the container. 2. Unpack the hardware from the boxes. Carefully remove the hardware and place it on a secure and clean surface. See "Select a Location" on page 3-4. 3. Remove all packing material. 3-2 Hardware Installation v1.0, February 2007