Netgear M4100-50G Hardware Installation Guide - Page 17
Hardware Installation, NETGEAR Managed Switch
View all Netgear M4100-50G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
NETGEAR Managed Switch 2. Use the provided Phillips head screws to fasten the brackets to the sides of the switch. M4100-24G-POE+ Mounting bracket 3. Tighten the screws with a No. 1 Phillips screwdriver to secure each bracket. 4. Align the bracket and rack holes. Use two pan-head screws with nylon washers to fasten each bracket to the rack. 5. Tighten the screws with a No. 2 Phillips screwdriver to secure the switch in the rack. Hardware Installation 17
Hardware Installation
17
NETGEAR Managed Switch
2.
Use the provided Phillips head screws to fasten the brackets to the sides of the
switch.
M4100-24G-POE+
Mounting
bracket
3.
Tighten the screws with a No. 1 Phillips screwdriver to secure each bracket.
4.
Align the bracket and rack holes. Use two pan-head screws with nylon washers to
fasten each bracket to the rack.
5.
Tighten the screws with a No. 2 Phillips screwdriver to secure the switch in the rack.