Netgear MCAB1001 MCA1001 User Guide - Page 38
Configuring the Coax Settings, Password, Administrative Password, Apply - support
UPC - 606449060355
View all Netgear MCAB1001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Coax-Ethernet Adapter MCA1001 User Manual 1. Select Password under Setup in the main menu. The Password screen displays. Figure 3-9 2. In the Administrative Password fields, enter between 4 and 8 characters (no spaces) for your new password, then confirm it by entering it again. 3. Click Apply to save your password setting. Note: If you forget your password, use a pen to press the Reset button located on the back of your Coax-Ethernet Adapter to factory default settings by holding it longer than 10 seconds; if LEDs are on, the Ethernet and Coax traffic LEDs will go off to indicate when the Coax-Ethernet Adapter has finished resetting. Configuring the Coax Settings Note: Usually the default settings do not need to be changed, unless Technical Support has specifically instructed you to adjust them. You may want to change these settings for the following reasons: 3-12 Managing Your MCA1001 Coax-Ethernet Adapter Network v1.0, December 2008