Netgear PLP2000 Product Data Sheet - Page 2

Powerline 2000 + Extra Outlet Connection Diagram Data Sheet PLP2000 Filtered power socket Pick-a-Plug LED Connects to Ethernet ports Push-and-Secure button Package Contents • Two (2) Powerline 2000 + Extra Outlet Adapters (PLP2000) • Two (2) Ethernet cables • Quick start guide Specifications • Dimensions: 133.5 x 72 x 37.8 mm (5.26 x 2.83 x 1.49 in) • Weight: 226g (0.5lb) • 2,000Mbps† Powerline interface • Two (2) 10/100/1000Mbps† Gigabit Ethernet ports • Typical coverage up to 500m² (5382ft²)† • IEEE® 1901 compliant • IEEE® 802.3 compliant • Works with HomePlug AV2 devices‡ Warranty • www.netgear.com/warranty System Requirements • Ethernet: two (2) RJ-45 Ethernet ports • Existing electrical wiring and outlets This product comes with a limited warranty that is valid only if purchased from a NETGEAR authorized reseller. * 90-day complimentary technical support following purchase from a NETGEAR authorized reseller. † Actual data throughput and data over distance will vary. Network conditions and environmental factors, including volume of network traffic, building material and construction, and network overhead, result in lower actual data throughput rate. Outlets must be electrically connected in order for Powerline devices to provide a network connection between them. AFCI circuit breaker and Powerline in different circuit may degrade the Powerline performance. ‡ For a complete list of HomePlug AV certified devices, please check www.homeplug.org/certified_products. NETGEAR, the NETGEAR Logo, and genie are trademarks of NETGEAR, Inc. Mac and the Mac logo are trademarks of Apple Inc. Any other trademarks mentioned herein are for reference purposes only. ©2017 NETGEAR, Inc. NETGEAR, Inc. 350 E. Plumeria Drive, San Jose, CA 95134-1911 USA, www.NETGEAR.com/support D-PLP2000-0 PAGE 2 OF 2