Netgear PS121v1 PS121v1 Installation Guide - Page 2
Unpack the Box and Verify the Contents, Connect the Print Server, Introduction, Installation - cd
View all Netgear PS121v1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Introduction Thank you for purchasing a NETGEAR PS121 USB Mini Print Server. With this print server you can share your printer with all the computers in your home or office that run Microsoft® Windows® 98, 2000, NT 4.x, Me, or XP operating system. This installation guide shows you how to connect the print server to your printer and configure it to use with your computers. Setup is easy - if you follow the instructions in this guide, the print server will soon be up and running for your computers. If you have problems, there is a troubleshooting section on page 8 to help you. You can get more detailed troubleshooting information from the Reference Manual on the USB Mini Print Server Resource CD or online at www.NETGEAR.com in our Support section. Installation Procedure Overview Estimated time: 30 minutes 1. Unpack the box and verify the contents. 2. Connect the print server to the printer and to the network. 3. Configure the print server to be recognized on the network. 4. Configure each computer to print through the print server. Note: You only need to go through procedures 1 through 3 once. Repeat procedure 4 for each computer that will share the printer with the print server. It takes less than 5 minutes to configure and test each computer. On the USB Mini Print Server Resource CD, you will find a Reference Manual containing more detailed information about installation, troubleshooting and configuration. 1 1 Unpack the Box and Verify the Contents PS121 USB Mini Print Server USB Mini Print Server Resource CD, Installation Guide, Warranty/ Support information card USB Cable When you open the box, verify that you received everything. The package includes: • PS121 USB Mini Print Server • AC Power adapter • 5 ft. (1.52 m) USB cable • USB Mini Print Server Resource CD • Installation guide • Warranty/Support information card Power adapter 2 Connect the Print Server The PS121 USB Mini Print Server connects directly to the USB port on your printer. After connecting it to your printer, you then connect the print server to a network device (like a hub, router, or switch). Before you share the printer with the NETGEAR PS121 USB Mini Print Server, you should have at least one computer connected to an Ethernet network and have one unused port on an Ethernet hub, switch, or router. 2