Netgear RN10441D Software Manual - Page 24
Change from Flex-RAID to X-RAID2, To change from Flex-RAID to X-RAID2 on a single-volume system
View all Netgear RN10441D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
ReadyNAS OS 6.1 Change from Flex-RAID to X-RAID2 If your system contains only one volume, you can easily switch from Flex-RAID to X-RAID2. Data on the Flex-RAID volume is preserved when you switch to X-RAID2. If your system contains multiple volumes, you must first reconfigure your disks into a single volume. Note: When you switch to X-RAID2 mode, any extra disks installed in your system are automatically reformatted and used for storage expansion. You cannot change the RAID mode of a RAID 0 or RAID 10 volume. To change from Flex-RAID to X-RAID2 on a single-volume system: 1. Select System > Volumes. 2. Click the X-RAID button at the right side of the screen. 3. Confirm that you want to switch from X-RAID2 to Flex-RAID. The volume switches from Flex-RAID mode to X-RAID2 mode and the indicator on the X-RAID button turns green. Any available drives are automatically used for storage expansion. Volume Configuration 24