Netgear RND4000v2 Software Manual - Page 64
Update Firmware Remotely, Con gt; System > Settings, Update, Check for Updates
View all Netgear RND4000v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
ReadyNAS for Home RAIDiator 5.3 NETGEAR recommends that you back up your data, especially data that cannot be replaced, before you perform a firmware update. Update Firmware Remotely If your ReadyNAS system has Internet access, the remote method is easiest. To update firmware remotely: 1. Select Configure > System > Settings, and click Update to expand that section. 2. Click the Check for Updates button. If no firmware update is available, you are notified that your system has the most current firmware. If a firmware update is available, you are prompted to update your system. 3. If a firmware update is available, click the Perform System Update button. A pop-up window displays notifying you that the firmware update is under way. After the update finishes, you are prompted to reboot the system. 4. Reboot your system. If you enabled email alerts, your ReadyNAS system sends a message when the firmware update finishes. Update Firmware Locally If you keep your ReadyNAS system in a location that does not have Internet access, for example, at a remote vacation cabin, you must update your firmware locally. To update firmware locally: 1. Using a computer that has Internet access, download the latest firmware for your system from http://readynas.com/downloads to a USB drive. 2. Connect the USB drive containing the updated firmware file to your ReadyNAS system. System Management 64