Netgear RND4425 RND4000 User Manual - Page 14
Specifying Your Ethernet Connection Settings, Apply, Standard Setting, Use values from a DHCP server - guide
UPC - 606449054071
View all Netgear RND4425 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
NETGEAR ReadyNAS User Guide Toward the bottom left, there are two buttons that allow you to switch back and forth between the Setup Wizard mode and the Advanced Control mode. At the bottom of the screen is the status bar including the date button on the left which, which clicked, links you to the Clock screen. The status lights to the right give a quick glimpse of the system device status. Figure 1-3 Move the mouse pointer over the status light to display device information, or click a status light to display the status in more detail. Above the Status Lights is the Apply button. Use this to save any changes on the current screen. You can access your Network settings by selecting Network from the main menu. From the Network menu, you can then navigate to your basic network settings screens such as Interfaces, Global Settings, WINS and DHCP. Specifying Your Ethernet Connection Settings Select Network > Interfaces, and then select the Ethernet tab to specify network interface-specific settings for Standard Settings, VLAN Settings and Performance Settings. In the Standard Setting section, you can specify the IP address, network mask, speed/duplex mode, and MTU settings. In most networks where a DHCP server is enabled, you can simply specify the Use values from a DHCP server option to automatically set the IP address and network mask. Figure 1-4 1-2 v1.0, October 2007 Configuring Your ReadyNAS