Netgear RND44751G Hardware Manual - Page 23

ReadyNAS Duo v2 and NV+ v2 Status Information You can obtain information about the status of your unit by reviewing the indicators listed in the following table. Indicator Power button and LED Disk LEDs (1, 2, 3, 4) Disk activity LED Rear panel Ethernet port LEDs Description Press this button to turn on the ReadyNAS. The LED has these states: • Blinking. Booting or shutting down • On. Powered on • Off. Powered off Each disk bay has an LED associated with it on the front panel of the unit. The disk LEDs have these states: • On. Power is on and the disk is operating normally. • Blinking. The disk was removed, failed, or is resynchronizing. • Off. The disk bay is empty. The disk activity LED has these states: • Blinking. A disk is active. • Off. No disks are active. Two LED status indicators are built into this port, one green and one amber. They indicate port speed and activity as follows: • Green on, amber off. 1000 Mbps connection speed, no activity • Green blinking, amber off. 1000 Mbps connection speed, activity • Green off, amber on. 10 Mbps or 100 Mbps connection speed, no activity • Green off, amber blinking. 10 Mbps or 100 Mbps connection speed, no activity • Green off, amber off. No connection System Shutdown You can shut down your unit in these ways: • Using the Power button: • Preferred shutdown. Press the Power button twice to initiate a graceful shutdown. • Forced shutdown. If the unit is not responding, unplug it. • Using the ReadyNAS Dashboard. For information about using the ReadyNAS Dashboard to shut down your NV+ v2, see the ReadyNAS RAIDiator 5.3 for Home Software Manual, which is available at http://www.readynas.com/documentation. ReadyNAS NV+ v2 23