Netgear WAG302NA Reference Manual - Page 60
Wireless Channels on B-7, Table 4-1., General Information Fields
UPC - 606449039467
View all Netgear WAG302NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302 This screen shows the following parameters: Table 4-1. General Information Fields Field Description Access Point Information Access Point Name (NetBIOS name) MAC Address Country/Region Firmware Version The default name may be changed if desired. Displays the Media Access Control address (MAC address) of the wireless access point's Ethernet port. Displays the domain or region for which the wireless access point is licensed for use. It may not be legal to operate this wireless access point in a region other than one of those identified in this field. The version of the firmware currently installed. Current IP Settings IP Address Subnet Mask Default Gateway DHCP Client The IP address of the wireless access point. The subnet mask for the wireless access point. The default gateway for the wireless access point communication. Enabled indicates that the current IP address was obtained from a DHCP server on your network. Disabled indicated a static IP configuration. Current Wireless Settings 11a Access Point Mode Operating Mode Wireless Network Name (SSID) Channel/Frequency WEP/WPA Identifies the operating mode of the WAG302: Access Point, Point-to-point bridge, Multi-point bridge or Repeater. Identifies the 802.11 operating mode of the WAG302. Displays the wireless network name (SSID) being used by the wireless port of the wireless access point. The default is NETGEAR_11a. Identifies the channel the wireless port is using. 52 is the default channel setting. See "Wireless Channels" on page B-7 for the frequencies used on each channel. WEP/WPA setting. 4-6 Management 202-10078-01