Netgear WG302 WG302v1 Reference Manual - Page 53
Global-key Re-Key Time, IP Address
UPC - 606449030365
View all Netgear WG302 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302 3. Enter the Radius settings. • Authentication/Access Control Radius Server Configuration: This configuration is required for authentication using Radius. IP Address, Port No. and Shared Secret is required for communication with Radius Server. A Secondary Radius Server can be configured which is used on failure on Primary Radius Server • IP Address: The IP address of the Radius Server. The default is 0.0.0.0. • Port Number: Port number of the Radius Server. The default is 1812. • Shared Secret: This is shared between the Wireless Access Point and the Radius Server while authenticating the supplicant. • Re-authentication Time: The time interval in seconds after which the supplicant will be authenticated again with the Radius Server. The default is 3600 seconds. • Global-key Re-Key Time: Check on this option to enable Re-keying of Global Key. The Global Key Re-Key can be done based on time interval in seconds or number of packets exchanged using the global key. The default is 3600 seconds. • Update if any station disassociates: Check on this option to refresh global key when any stations disassociated with wireless Access Point. • Accounting Radius Server Configuration: This configuration is required for accounting using Radius Server. IP Address, Port No. and Shared Secret is required for communication with Radius Server. A Secondary Radius Server can be configured which is used on failure on Primary Radius Server. • IP Address: The IP address of the Radius Server. The default is 0.0.0.0. • Port Number: Port number of the Radius Server. The default is 1813. • Shared Secret: This is shared between the Wireless Access Point and the Radius Server while authenticating the supplicant. 4. Click Apply to save your settings. Basic Installation and Configuration July 2005 v3.0 3-31