Netgear WG302v1 WG302v1 Product datasheet - Page 2

Product Specifications, NETGEAR Related Products, Package Contents, System Requirements, Antennas - firmware

Page 2 highlights

WG302 ProSafe™ Wireless Access Point 802.11g NETGEAR Related Products - FVXS538 ProSafe™ VPN Firewall 200 - FVS338 ProSafe™ VPN Firewall 50 - FVS318 ProSafe™ VPN Firewall 8 - FWG114P ProSafe™ 802.11g Wireless Firewall with Print Server - WAG511 Dual Band 802.11a/b/g Wireless PC Card - WAG311 Dual Band 802.11a/b/g/ Wireless PCI Adapter - WG511T 108 Mbps Wireless PC Card - WG311T 108 Mbps Wireless PCI Adapter 4500 GreatEAvmeerryicbaoPdayrk'swaCyonnecting.™ Santa Clara, CA 95054 USA Phone: 1-888-NETGEAR (638-4327) E-mail: [email protected] www.NETGEAR.com ©2005 NETGEAR, Inc. NETGEAR®, Everybody's connecting®, the Netgear logo, Auto Uplink, ProSafe, Smart Wizard and RangeMax are trademarks or registered trademarks of NETGEAR, Inc. in the 68! United States and/or other countries. Microsoft, Windows, and the Windows logo are trademarks or registered 36! trademarks of Microsoft Corporation in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice. All rights reserved. * Free basic installation support provided for 90 days from date of purchase. Advanced product features and configurations are not included in free basic installation support; optional premium support available. D-WG302-5 0678! Product Specifications • Wireless: - Standards: IEEE 802.11g 54 Mbps - Antennas: Two (2) 5 dBi detachable - Typical maximum power output: 19.8 dBm - Typical maximum receive sensitivity: 96 dB Note: Maximum Tx varies based on country and/or region selection to ensure local regulatory compliance. • Physical Interfaces: - LAN Port: One (1) 10/100BASE-T Ethernet (RJ-45) port with Auto Uplink™ (Auto MDI-X) with IEEE 802.3af Power over Ethernet (PoE) support - Power adapter: Output 12 VDC, 1.2 A; plug is localized to country of sale - Five (5) LEDs: Power, Test, 100 Mbps, Link/ACT, and WLAN 802.11g - Console Port: One (1) with standard RS-232C interface with DB-9 male connector - Antenna Connectors: Two (2) reverse SMA • Network Management: - Remote configuration and management through Web browser, SNMP or Telnet with command line interface (CLI) - SNMP management supports SNMP MIB I, MIB II, and 802.11 MIB • Advanced Wireless Features: - Bridging and repeater mode - Simultaneous wireless bridge and access point mode - Adjustable transmit power control 100 mW down to 0 mW - Dynamic transmit power control and channel selection with AutoCell - Wi-Fi Multimedia (WMM™) to optimize audio, video and voice applications • Receive Sensitivity: - 802.11b 1 Mbps -93 dBm 2 Mbps -92 dBm 5.5 Mbps -92 dBm 11 Mbps -89 dBm - 802.11g 6 Mbps 9 Mbps 12 Mbps 18 Mbps 24 Mbps 36 Mbps 48 Mbps 54 Mbps -93 dBm -90 dBm -90 dBm -88 dBm -84 dBm -80 dBm -76 dBm -75 dBm • Security: - Wi-Fi Protected Access 2 (WPA2), 802.11i - Block SSID Broadcast - VPN pass-through support - MAC address filtering with access control lists - up to 256 users - 802.1x RADIUS support with EAP TLS, TTLS, PEAP - Secure SSH Telnet - Secure Socket Layer (SSL) remote management login - Wireless isolation enables peer-to-peer blocking so users may not access another user's PC • Standards, Safety and Electromagnetic Conformance: - IEEE 802.11g (2.4 GHz Frequency Band, DSSS Modulation Type) - IEEE 802.3af Power over Ethernet (PoE) - FCC Part 15 Subpart B and Subpart C - CE EN60950, EN 300328-2 v1.1.1 (2000-07), EMC EN301489-1 v1.2.1 (2000-08), and EN301489-17 v1.1.1 (2000-09), EN55022(B), CISPR22(B), AS/NZS 3548(B) • Physical Specifications: - Dimensions: 25.4 x 17.8 x 3.18 cm (10 x 7 x 1.25 in.) - Weight: 574 g (1.27 lb) - Processor and memory: Intel® IXP422, 8 MB Flash, 16 MB DRAM • Environmental Specifications: - Operating temperature: 0 to 40° C (32 to 104° F) - Operating humidity: 90% maximum relative humidity, noncondensing • Warranty: NETGEAR 3-year warranty Package Contents - ProSafe 802.11g Wireless Access Point WG302 - Two (2) 5 dBi Detachable Antennas - Resource CD - Power adapter - Ethernet cable - Wall Mounting Kit - Installation guide - Warranty/support information card System Requirements - Windows® 98, Me, 2000, or XP - 2 Mbytes of available disk space Antennas and Accessories - ANT24O5 5 dBi Omni-directional antenna - ANT2409 9 dBi Indoor/Outdoor Omni-directional Antenna - ANT24D18 18 dBi Indoor/Outdoor Directional antenna - Five (5) antenna cable lengths: 1.5, 3, 5, 10, and 30 m AutoCell RF Management and Control AutoCell RF Management technology is sophisticated cognitive radio software embedded in the WG302 firmware that is accessed via the user interface. The AutoCell-enabled WG302 monitors radio frequency (RF) patterns and automatically tunes the access point signal strength and channel selection to avoid interference to achieve optimum performance.

  • 1
  • 2

Everybody’s Connecting.
Product Specifications
• Wireless:
-
Standards:
IEEE 802.11g 54 Mbps
-
Antennas:
Two (2) 5 dBi detachable
-
Typical maximum power output:
19.8 dBm
-
Typical maximum receive sensitivity:
96 dB
Note: Maximum Tx varies based on country and/or region
selection to ensure local regulatory compliance.
Physical Interfaces:
-
LAN Port:
One (1) 10/100BASE-T Ethernet
(RJ-45) port with Auto Uplink
(Auto MDI-X)
with IEEE 802.3af Power over Ethernet (PoE)
support
-
Power adapter:
Output 12 VDC, 1.2 A; plug is
localized to country of sale
-
Five (5) LEDs:
Power, Test, 100 Mbps, Link/ACT,
and WLAN 802.11g
-
Console Port:
One (1) with standard RS-232C
interface with DB-9 male connector
-
Antenna Connectors:
Two (2) reverse SMA
Network Management:
-
Remote configuration and management through
Web browser, SNMP or Telnet with command
line interface (CLI)
-
SNMP management supports SNMP MIB I,
MIB II, and 802.11 MIB
Advanced Wireless Features:
-
Bridging and repeater mode
-
Simultaneous wireless bridge and access point mode
-
Adjustable transmit power control 100 mW
down to 0 mW
-
Dynamic transmit power control and channel
selection with AutoCell
-
Wi-Fi Multimedia (WMM
) to optimize
audio, video and voice applications
Receive Sensitivity:
-
802.11b
1 Mbps
-93 dBm
2 Mbps
-92 dBm
5.5 Mbps
-92 dBm
11 Mbps
-89 dBm
-
802.11g
6 Mbps
-93 dBm
9 Mbps
-90 dBm
12 Mbps
-90 dBm
18 Mbps
-88 dBm
24 Mbps
-84 dBm
36 Mbps
-80 dBm
48 Mbps
-76 dBm
54 Mbps
-75 dBm
• Security:
-
Wi-Fi Protected Access 2 (WPA2), 802.11i
-
Block SSID Broadcast
-
VPN pass-through support
-
MAC address filtering with access control lists –
up to 256 users
-
802.1x RADIUS support with EAP TLS, TTLS, PEAP
-
Secure SSH Telnet
-
Secure Socket Layer (SSL) remote management login
-
Wireless isolation enables peer-to-peer blocking
so users may not access another user’s PC
NETGEAR Related Products
-
FVXS538 ProSafe
VPN
Firewall 200
-
FVS338 ProSafe
VPN
Firewall 50
-
FVS318 ProSafe
VPN
Firewall 8
-
FWG114P ProSafe
802.11g
Wireless Firewall with Print
Server
-
WAG511 Dual Band
802.11a/b/g Wireless PC Card
-
WAG311 Dual Band
802.11a/b/g/ Wireless PCI
Adapter
-
WG511T 108 Mbps Wireless
PC Card
-
WG311T 108 Mbps Wireless
PCI Adapter
WG302
ProSafe™ Wireless Access Point 802.11g
Standards, Safety and Electromagnetic
Conformance:
-
IEEE 802.11g (2.4 GHz Frequency Band, DSSS
Modulation Type)
-
IEEE 802.3af Power over Ethernet (PoE)
-
FCC Part 15 Subpart B and Subpart C
-
CE
EN60950, EN 300328-2 v1.1.1 (2000-07),
EMC EN301489-1 v1.2.1 (2000-08), and
EN301489-17 v1.1.1 (2000-09), EN55022(B),
CISPR22(B), AS/NZS 3548(B)
Physical Specifications:
-
Dimensions:
25.4 x 17.8 x 3.18 cm (10 x 7 x 1.25 in.)
-
Weight:
574 g (1.27 lb)
-
Processor and memory:
Intel
®
IXP422, 8 MB
Flash, 16 MB DRAM
Environmental Specifications:
-
Operating temperature:
0 to 40° C (32 to 104° F)
-
Operating humidity:
90% maximum relative
humidity, noncondensing
• Warranty:
NETGEAR 3-year warranty
Package Contents
-
ProSafe 802.11g Wireless Access Point WG302
-
Two (2) 5 dBi Detachable Antennas
-
Resource CD
-
Power adapter
-
Ethernet cable
-
Wall Mounting Kit
-
Installation guide
-
Warranty/support information card
System Requirements
-
Windows
®
98, Me, 2000, or XP
-
2 Mbytes of available disk space
Antennas and Accessories
-
ANT24O5 5 dBi Omni-directional antenna
-
ANT2409 9 dBi Indoor/Outdoor Omni-directional
Antenna
-
ANT24D18 18 dBi Indoor/Outdoor Directional
antenna
-
Five (5) antenna cable lengths: 1.5,
3, 5, 10, and 30 m
AutoCell RF Management and Control
AutoCell RF Management technology is sophisticated
cognitive radio software embedded in the WG302 firmware
that is accessed via the user interface. The AutoCell-enabled
WG302
monitors radio frequency (RF) patterns and
automatically tunes the access point signal strength
and channel selection to avoid interference to achieve
optimum performance.
4500 Great America Parkway
Santa Clara, CA 95054 USA
Phone: 1-888-NETGEAR (638-4327)
www.NETGEAR.com
©2005 NETGEAR, Inc. NETGEAR®,
Everybody's connecting®, the Netgear
logo, Auto Uplink, ProSafe, Smart Wizard
and RangeMax are trademarks or regis-
tered trademarks of NETGEAR, Inc. in the
United States and/or other countries.
Microsoft, Windows, and the Windows
logo are trademarks or registered
trademarks of Microsoft Corporation in
the United States and/or other countries.
Other brand and product names are
trademarks or registered trademarks of
their respective holders. Information is
subject to change without notice.
All rights reserved.
* Free basic installation support provided
for 90 days from date of purchase.
Advanced product features and
configurations are not included in free
basic installation support; optional
premium support available.
D-WG302-5
0678
!