Netgear WG311v3 WG311v3 Installation Guide - Page 1

)NSTALLATION'UIDE NETGEAR 54 Mbps Wireless PCI Adapter WG311 v3 These setup instructions assume that you will connect to an access point or wireless router. Estimated completion time: 15-25 minutes. Installation 1. First, install the WG311 v3 software. Insert the NETGEAR CD. If the CD main page does not appear, double click Autorun.exe on the CD. a. Click Install the Software. The Check for Updates window opens. b. If you are connected to the Internet, click Check for Updates. If not, you can choose to install from the CD. c. Follow the Wizard steps and click Next to continue. When the software has been installed the Connection Wizard prompts you to shut down the computer. 2. Now, install the wireless PCI adapter. a. When prompted, shut down the computer. b. Unplug the computer, open the case, and install the WG311 v3 into a PCI slot. c. Connect the antenna to the adapter and position the antenna to the up position. d. Close the case, plug the power cord back in, and restart your computer. e. When prompted, select the country where you are located and click Agree. 3. Use the Smart Wizard to set up your wireless PCI adapter. a. Windows 2000, 98SE/ME users go to Step b. Windows XP or Vista users can set up the wireless adapter either with the NETGEAR Smart Wizard (recommended) or the Windows configuration utilities. • NETGEAR Smart Wizard: Reveals more information about each network and makes it easier to troubleshoot network connection problems. • Windows configuration utilities: See the Windows documentation or "Using Windows XP and Vista Wireless Configuration Utilities" at: http://documentation.netgear.com/reference/enu/winzerocfg/index.htm b. Click Next to accept the NETGEAR Smart Wizard. You will be prompted to let the wizard help you connect to a network (recommended). c. Click Next to accept. 4. Connect to a wireless network. a. Select the wireless network from the drop-down list, and the wizard records your choice. Note: Hidden networks do not broadcast the Network Name (SSID). These networks are in the drop-down list, but the Network Name (SSID) is blank. If the network uses security, then the Smart Wizard detects it. b. Follow the Wizard steps for Security (if used) and for saving a Profile. c. After you have reviewed the settings, click Finish. The WG311 v3 icon appears in the system tray and on the desktop; and the Settings page opens. The wizard initiates your wireless connection. It could take up to a minute for your wireless connection to be established. Check the status bar. Using the Status Bar The status bar is located at the bottom of the Settings page. Security Channel Throughput Wireless network Signal strength Find a Network Connection status Understanding the Status Bar Wireless network Identifies which wireless network you have joined. Security • Locked: security enabled. • Unlocked: security not enabled. Channel The wireless channel used by the network. If many wireless networks in your area use the same channel they can interfere with one another. Throughput Wireless throughput measured in Mega bits per second. Signal strength More dots indicates a stronger signal. Usually, you will experience higher throughput when the signal is strongest. Find a Network Click Find a Network to open the Connection Wizard. Connection status Identifies the status of your network connection. • Connected to Internet: Wireless Internet connection is OK. • Connected to Router: Wireless connection to the router is OK but the router is not connected to the Internet. • 169.254.x.x or The wireless connection to the router is OK but there is a problem with the router. See the online help or the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v3 User Manual on the NETGEAR CD for troubleshooting tips.