Netgear WN3000RP-100PAS User Manual - Page 14
Connect the Extender to an Existing Network, Use WPS to Add a PC to the Extender’s Wireless Network
View all Netgear WN3000RP-100PAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Universal WiFi Range Extender WN3000RP Connect the Extender to an Existing Network You can use this menu selection to wirelessly connect the Extender to your home network. 1. From the Extender menu at http://www.mywifiext.net, select Setup > Connect to an Existing Network. The Extender scans for wireless networks, and displays a list. If your wireless network is not on the list, and it is up and running, see Positioning Your Extender on page 7 for suggestions. 2. Click the radio button to select your network from the list and click Continue. The next screen displays: 3. Enter your network's passphrase or key and click Continue. The Extender joins your wireless network. Use WPS to Add a PC to the Extender's Wireless Network WPS (Wi-Fi Protected Setup) lets you connect a computer or wireless device to the Extender's network without entering the wireless network passphrase or key. Instead, you use a WPS button or enter a PIN to connect. WPS supports WPA and WPA2 wireless security. If your Extender network is open (no wireless security is set), then connecting with WPS automatically sets WPA2 + WPA wireless security on the Extender network. The Universal WiFi Extender WN3000RP Installation Guide explains how to use WPS during installation. You can connect with WPS by using either the WPS button on the side of the Extender, or by logging in to the Extender and clicking an onscreen WPS button. Extender Network Settings 14