Netgear WN802T-200 WN802T User Manual - Page 42
Restricting Wireless Access by MAC Address, Turn Access Control - password
UPC - 606449058505
View all Netgear WN802T-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual Restricting Wireless Access by MAC Address By default, all wireless PCs that are configured with the correct SSID are allowed access to your wireless network. For increased security, you can restrict access to your wireless network to only those trusted wireless PCs based on their MAC address. The Access Control List screen lets you block the network access privilege of any specified stations to only those displayed in the Trusted Wireless Stations table. When you enable the Turn Access Control On radio box, the access point will only accept connections from those clients on the Trusted Wireless Stations access control list. This provides an additional layer of security. Note: If configuring the WN802T from a wireless computer whose MAC address is not in the Trusted Wireless Stations access control list, when you select Turn Access Control On, you will lose your wireless connection when you click Apply. You must then access the wireless access point from a wired computer or from a wireless computer which is on the access control list to make any further changes. To restrict access based on MAC addresses: 1. Log in to the WN802T using the default address of http:/192.168.0.233, user name of admin and default password of password, or whatever LAN address and password you have set up. 2. Under Security on the main menu, select Access Control. The Access Control menu will display. Figure 3-8 3. Check the Turn Access Control On radio button. 4. Click Apply to enable the Access Control feature. 3-10 v1.0, August 2007 Wireless Security Settings