Netgear WNDR4300 Installation Guide - Page 1

Installation Guide N750 Wireless Dual Band Gigabit Router Premium Edition WNDR4300 Package Contents: Ethernet cable N750 Wireless Router Power adapter Step 1: Unplug the power to turn off your modem. DSL or cable Step 2: Connect one end of the yellow Ethernet cable to your modem, and the other end to the Internet port on your router. Internet Power On/Off Modem Step 3: Plug in the power to turn on your modem. Wait approximately 2 minutes until your modem turns on. If your modem has a battery backup, first remove and reinsert the battery before connecting your modem to power. Power On/Off N750 Wireless Router Step 4: Connect the power adapter to the router, then plug it into an outlet. Wait for the 2.4 GHz LED ( ) 2.4 GHz to light. If none of the LEDs light, make sure that the Power On/Off button is in the on position (pushed in). (not included) Laptop or desktop computer Step 5: Connect your computer to the router Step 6: Open a browser. If the web page does not display, close and reopen the browser, then enter http://www.routerlogin.net in the address bar, or check the "Troubleshooting" section on the back of this installation guide.