Netgear WNDRMAC WNDRMAC User Manual - Page 74
Wireless Repeating Function (WDS), Up to, 54Mbps, Wireless Base Station
View all Netgear WNDRMAC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
N600 Wireless Dual Band Gigabit Router WNDRMAC Wireless Repeating Function (WDS) You can set the WNDRMAC router up to be used as a wireless access point (AP). Doing this enables the router to act as a wireless repeater. A wireless repeater connects to another wireless router as a client where the network to which it connects becomes the ISP service. Wireless repeating is a type of Wireless Distribution System (WDS). A WDS allows a wireless network to be expanded through multiple access points instead of using a wired backbone to link them. The following figure shows a wireless repeating scenario. Base station access point Figure 9. Wireless repeating scenario Repeater access point Note: If you use the wireless repeating function, you need to select either WEP or None as a security option in the Wireless Settings screen. The WEP option displays only if you select the wireless mode Up to 54Mbps in the Wireless Settings screen. Wireless Base Station. The router acts as the parent access point, bridging traffic to and from the child repeater access point, as well as handling wireless and wired local computers. To configure this mode, you have to know the MAC addresses of the child repeater access point. Advanced Settings 74