Netgear WNR1000-100NAS WNR1000 Setup Manual - Page 21
Verifying Your Connection
View all Netgear WNR1000-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
3. Turn on your computer. It will take several minutes for your router to establish a connection with your computer and your Internet provider. For DSL customers, if software logs you in to the Internet, do not run that software. You might need to go to the Internet Explorer Tools menu, Internet Options, Connections tab and select "Never dial a connection." Verifying Your Connection Verify that your router is connected correctly by checking the wireless router status lights (as illustrated in Figure 11). Figure 11 Table 2. Status Lights After Installation Label Description 1. Power 2. Push 'N' Connect 3. Wireless 4. Internet The power light should turn solid green. If it does not, see "Checking Basic Router Functions" on page 30. The WPS button/light will not be lit unless you push it to enable Push 'N' Connect (WPS) security. See "Using Push 'N' Connect (WPS) to Configure Your Wireless Network" on page 23. The wireless light should be lit after turning on the wireless router. The Internet port light should be lit. If it is not, make sure the Ethernet cable is securely attached to the wireless router Internet port and the modem, and that the modem is powered on. Manually Installing Your Router 17