Netgear WNR3500 WNR3500v2 Setup Manual - Page 33

Figure 18 Using either method, the client wireless device will attempt to detect the WPS signal from the router and establish a wireless connection in the time allotted. • If no connection is detected, - The router WPS screen displays a message confirming that WPS did not establish a connection with a wireless client device. - Neither the router's SSID nor the wireless security settings were configured on the client device. • If a connection is established: - The router WPS screen displays a message confirming that the wireless client was successfully added to your wireless network. - The router's SSID and wireless security settings were successfully transmitted to the client; the client now shares the same security settings as the router. 4. Note your SSID and security key (whether previously set or generated) for your wireless network. To access the Internet from any computer connected to your wireless router, launch a browser such as Microsoft Internet Explorer or Firefox. You should see the wireless router's Internet LED blink, indicating communication to the ISP. If you are planning a mixed network of WPS capable devices and non-WPS capable devices, NETGEAR suggests that you set up your wireless network and security settings manually first, and only use WPS for adding the WPS capable devices. For more information on setting up your wireless network and configuring your wireless security settings, see the online User Manual. Configuring Your Wireless Network 29