Netgear XAVB5201 Installation Guide - Page 1
Netgear XAVB5201 Manual
View all Netgear XAVB5201 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
LED and Button Descriptions Power LED Powerline LED Ethernet LED Factory Reset Security button Ethernet port Item Power LED Powerline LED Description • Solid green. The electrical power is on. • Solid amber. The adapter is in power saving mode. • Blinking green. The adapter is in the process of setting up security. • Off. There is no electrical power. • Solid. The adapter is connected to a Powerline network. • Off. The adapter has not found any other compatible Powerline devices using the same encryption key. The Pick A Plug feature lets you pick the electri- cal outlet with the strongest link rate, indicated by the color displayed by the LED: Green: Link Amber: Link rate Red: Link rate > 80 > 50 and < 80 rate < 50 Mbps (Best) Mbps (Better) Mbps(Good) Item Ethernet LED Description • Solid. The Ethernet port is linked. • Off. There is no Ethernet connection. Security button Factory Reset After you plug in your new AV adapter, press the Security button for 2 seconds, then press the security button on one of the other AV adapters in your existing network for 2 seconds. Both buttons must be pressed within 2 minutes. Note: The Security button does not work in power saving mode (see "Power LED is amber" in the Troubleshooting Tips table). Press the Reset button for 1 second, then release it to return the Powerline adapter to its factory default settings. Warning: Do not press the Security button on the Powerline adapter until installation is complete and the adapters are communicating with each other (indicated by the blinking Powerline LED). Pressing this button too soon can temporarily disable Powerline communication. If this should occur, use the Factory Reset button to return the Powerline adapter to its factory default settings. Troubleshooting Tips Power LED is off Make sure that power is supplied to the electrical outlet, and that the Powerline devices are not plugged into an extension cord, power strip, or surge protector. Power LED is amber Power saving mode occurs when the Ethernet LED is off. This can occur when: • The Ethernet cable is unplugged. • The device connected through the Ethernet cable is turned off. • The adapter is idle for 10 minutes. It returns to normal mode within 2 seconds once the Ethernet link is up. Powerline LED is off • If you have set network security, make sure that all Power line devices are using the same encryption key; see the online User Manual for details. • Press the Reset button on each device for 1 second to return the Powerline adapter to its factory default settings. Powerline LED is amber or red Move the Powerline device to a closer location. Ethernet LED is off • Make sure that the Ethernet cables are working and securely plugged into the devices. • Press the Reset button on each device for 1 second to return the Powerline adapter to its factory default settings. This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union, this product should be treated and recycled in accordance with the laws of your jurisdiction implementing the WEEE Directive. NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. in the United States and/or other countries. Information is subject to change without notice.Other brand and product names are trademarks or registered trademarks of their respective holders. ©2012 by NETGEAR, Inc. All rights reserved. May 2012 Installation Guide Powerline 500 (2-pack) XAVB5201 Package Contents Powerline 500 Nano Adapters Ethernet cables In some regions, a Resource CD is included with your product.