Netgear XE103 XE103 User Manual - Page 18

Set Your Network Password, Enter the device password for each remote PowerLine device

Get Netgear XE103 - 85 Mbps Wall-Plugged EN Adapter Bridge PDF manuals and user guides
UPC - 606449047981
View all Netgear XE103 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

XE103 Wall-Plugged Ethernet Adapter User Guide Set Your Network Password The fastest and most reliable way to set the network password is to set the password for all devices at once. To do this, you need the device password on the back label of each PowerLine device. There are two steps to setting the password: first enter the device password for each remote PowerLine device, and then set the network password. 1. Enter the device password for each remote PowerLine device: a. Make sure that all PowerLine devices are plugged into 100~240V AC wall sockets. b. Start the PowerLine encryption utility and click the Main tab. Figure 1-11 c. Check that the utility lists all the remote PowerLine devices d. Select a PowerLine device and, if more than one remote device is listed, identify it from the MAC address. 10 v1.1, March 2007

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
XE103 Wall-Plugged Ethernet Adapter User Guide
10
v1.1, March 2007
Set Your Network Password
The fastest and most reliable way to set the network password is to set the password for all devices
at once. To do this, you need the device password on the back label of each PowerLine device.
There are two steps to setting the password: first enter the device password for each remote
PowerLine device, and then set the network password.
1.
Enter the device password for each remote PowerLine device:
a.
Make sure that all PowerLine devices are plugged into 100~240V AC wall sockets.
b.
Start the PowerLine encryption utility and click the Main tab.
c.
Check that the utility lists all the remote PowerLine devices
d.
Select a PowerLine device and, if more than one remote device is listed, identify it from
the MAC address.
Figure 1-11