Netgear XS708T User Manual - Page 132

8-Port, 12-Port, and 16-Port 10-Gigabit Smart Managed Pro Switch The default values are as follows: • All ports are assigned to the default VLAN of 1. • All ports are configured with a PVID of 1. • All ports are configured to an Acceptable Frame Types value of Admit All Frames. • All ports are configured with ingress filtering disabled. • All ports are configured to transmit only untagged frames. • GVRP is disabled on all ports and all dynamic entries are cleared. All VLANs, except for the default VLAN, are deleted. Configure VLAN membership To configure VLAN membership: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Discover or change the switch IP address on page 13. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Switching > VLAN > Advanced > VLAN Membership. Configure Switching 132 User Manual