Netgear XSM4348CS Software Administration Manual Software Version 12.x - Page 376

M4300 Series and M4300-96X Fully Managed Switches CLI Example 2: Configure EXEC Authorization by a RADIUS Server The following example shows how to use the CLI to configure command authorization by a RADIUS server for a Telnet user and allow the user to access privileged EXEC mode directly. 1. Configure a RADIUS server on the switch. (Netgear Switch) #config (Netgear Switch) (Config)#radius server host auth 172.26.2.41 (Netgear Switch) (Config)#radius server key auth 172.26.2.41 Enter secret (64 characters max):12345678 Re-enter secret:12345678 2. Change the authentication mode for Telnet users to RADIUS. (Netgear Switch)(Config)#aaa authentication login networkList radius 3. Verify that the RADIUS authentication is set up for Telnet users. (Netgear Switch) #show authentication methods Login Authentication Method Lists defaultList : local networkList : radius Enable Authentication Method Lists enableList : enable none enableNetList : enable none Line ------Console Telnet SSH Login Method List defaultList networkList networkList Enable Method List enableList enableList enableList HTTPS HTTP DOT1X :local :local : 4. Create an EXEC authorization list and configure RADIUS as the authorization. (Netgear Switch)(Config)# aaa authorization exec execList radius Security Management 376 Software Administration Manual