Nextar 43LT Hardware Manual - Page 35

Problem, Possible Cause, Possible Solution

Page 35 highlights

Troubleshooting Problem Navigator cannot receive satellite signals or does not orient Possible Cause Unit may be inside a tunnel, inside a building, or tall buildings may obstruct the satellite signal Mapping SD card may be removed for music or photo functions Possible Solution Check for obstructions Re-install Mapping SD Card Satellite signal strength is unstable. Comes and goes. Rechargeable battery is weak Unit is moving side to side too much Signal is obstructed by buildings or other materials System software fails to function after entering a command Plug in power adaptor and charge Battery Secure unit Check and correct obstruction Turn the unit off and on again to reset using slide switch on rear. 34

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80

34
Troubleshooting
Problem
Possible Cause
Possible Solution
Unit may be inside a
tunnel, inside a building,
or tall buildings may
obstruct the satellite
signal
Check for
obstructions
Navigator
cannot
receive
satellite
signals or
does not
orient
Mapping SD card may
be removed for music or
photo functions
Re-install Mapping
SD Card
Rechargeable battery is
weak
Plug in power
adaptor and
charge Battery
Unit is moving side to
side too much
Secure unit
Signal is obstructed by
buildings or other
materials
Check and correct
obstruction
Satellite
signal
strength is
unstable.
Comes and
goes.
System software fails to
function after entering a
command
Turn the unit off
and on again to
reset using slide
switch on rear.