Nextar N1-102 N1-101 Manual - Page 2

This Charging Time Is Typically 2-3

Get Nextar N1-102 - Key Chain Photo Viewer PDF manuals and user guides
UPC - 714129933339
View all Nextar N1-102 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 2 highlights

5. After double clicking this icon, the following screen should appear: NOTE: YOUR PHOTO ALBUM MUST BE FULLY CHARGED BEFORE USING IT. THIS CHARGING TIME IS TYPICALLY 2-3 HOURS 2. When the unit if first plugged in to your PC, the following screen appears: 5. You will see the following screen: Using the DOWN navigation button on the side of the unit, move the cursor down to the USB Update position: 6. Follow the on-screen prompts to install the software. Accept all the "defaults" that the program suggests (if you are experienced in installing software you can customize your install) You are now ready to charge your Keychain Photo Album. 1. Using the included cable, plug the cable into your PC first, and then into your Mini Photo Album. There will be blinking battery icon in the lower left hand corner. This icon will stop flashing once your unit is fully charged 3. Once the unit is fully charged, unplug it from your PC and turn it off using the ON/OFF switch on the side of the unit. 4. With the unit off, plug it back into your PC (using the same procedure as #1). Then press the MENU (top) button to select the Update mode. The following screen will appear: You are now ready to transfer images to and from your unit.

  • 1
  • 2
  • 3
  • 4
  • 5
5.
After double clicking this icon, the
following screen should appear:
6.
Follow the on-screen prompts to install
the software.
Accept all the “defaults”
that the program suggests
(if you are
experienced in installing software you
can customize your install)
You are now ready to charge your Keychain
Photo Album.
1.
Using the included cable, plug the cable
into your PC first, and then into your
Mini Photo Album.
NOTE:
YOUR PHOTO ALBUM MUST BE
FULLY CHARGED BEFORE USING IT.
THIS CHARGING TIME IS TYPICALLY 2-3
HOURS
2.
When the unit if first plugged in to your
PC, the following screen appears:
There will be blinking battery icon in the
lower left hand corner.
This icon will
stop flashing once your unit is fully
charged
3.
Once the unit is fully charged, unplug it
from your PC and turn it off using the
ON/OFF switch on the side of the unit.
4.
With the unit off, plug it back into your
PC (using the same procedure as #1).
5.
You will see the following screen:
Using the DOWN navigation button on the
side of the unit, move the cursor down to the
USB Update position:
Then press the MENU (top) button to select
the Update mode.
The following screen will
appear:
You are now ready to transfer images to and
from your unit.