Nikon 25478 User Manual - Page 28
Auto Meter-Off, Auto off timers, The Built-in Flash, Using a Zoom Lens, Image Sensor Cleaning
View all Nikon 25478 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
A Auto Meter-Off The viewfinder and information display will turn off if no operations are performed for about 8 seconds (auto meter-off ), reducing the drain on the battery. Press the shutter-release button halfway to reactivate the display. The auto meter-off delay can be selected using Custom Setting c2 (Auto off timers; 0 11). 8 s Exposure meters on Exposure meters off Exposure meters on s A The Built-in Flash If additional lighting is required for correct exposure in i mode, the built-in flash will pop up automatically when the shutter-release button is pressed halfway. If the flash is raised, photographs can only be taken when the flash-ready indicator (M) is displayed. If the flashready indicator is not displayed, the flash is charging; remove your finger briefly from the shutter-release button and try again. To save battery power when the flash is not in use, return it to its closed position by pressing it gently downward till the latch clicks into place. A Using a Zoom Lens Use the zoom ring to zoom in on the subject so that it fills a larger area of the frame, or zoom out to increase the area visible in the final photograph (select longer focal lengths on the lens focal length scale to zoom in, shorter focal lengths to zoom out). Zoom in Zoom ring Zoom out A Image Sensor Cleaning The camera vibrates the low-pass filter covering the image sensor to remove dust when the camera is turned on or off. 20