Nikon 25535 User Manual - Page 145

Using the Wireless Transfer Mode The following conditions and preparations are required to use the Wireless transfer mode (c134). Requirements for Using the Wireless Transfer Mode Wireless LAN Environment (IEEE802.11b/g Compatible) Set up the following devices or environment. • When making a peer-to-peer connection between the camera and computer (Ad-hoc mode): Set up a computer with an internal or external wireless LAN adapter. Wireless Transfer Mode • When making a connection via an access point (Infrastructure mode): Set up a wireless LAN environment using a wireless LAN access point. Check that the computer which will receive the images is connected to the wireless LAN network. Wireless LAN access point Operating Systems that Support Wireless Transfer Mode Operations of the Wireless transfer mode are confirmed for the following operating systems: • Windows XP Professional/Home Edition (SP1 or later; SP2 is recommended) • Mac OS X (10.3 or later) The latest information on supported operating systems is available on the Nikon Web site listed in Life-Long Learning (c1). Software for Setting up Profile Information in the Camera • Wireless Camera Setup Utility (hereafter referred to as the Setup Utility) The Setup Utility sets the profiles and wireless LAN environment information in the camera. If this is not set properly, the camera cannot connect to the wireless LAN. The "Wireless Camera Setup Utility/PictureProject Installer CD" (hereafter referred to as the CD-ROM) supplied with the camera is required for installation. Wireless LAN environment For further information about wireless LAN environment, contact the manufacturer of the wireless LAN adapter or the access point for the wireless LAN, or refer to the commercial guidebook. 133