Nikon 25539 User Manual - Page 120

Information about Profile Configuration Configuration of Profile Devices Every computer that will connect to the camera must be configured as a profile device. Maximum Number of Profile Devices You can configure a maximum of nine profile devices (computers, printers connected to a computer, the optional PD-10 wireless printer adapter) in the camera. If nine have already been configured and you want to add a new one, delete an unneeded profile device using the Setup Utility (P.120). Checking the Computer Wireless LAN Settings Check the following items on the computer before starting the Setup Utility and configuring a profile device. Refer to the manual and other reference materials for your computer and wireless LAN devices. Network Name (SSID) Enter the network ID for the computer. Type Select Camera to Computer (Ad-hoc) or Access Point (Infrastructure). The camera and the computer must be set to the same option. Channel Select the same channel (1 to 11) set in the computer (Camera to Computer (Ad-hoc) only). Authentication Select Open, Shared or WPA-PSK (Access Point (Infrastructure) only). Select the same method set in the computer. Security Select None, WEP 64 bits, WEP 128 bits or TKIP (Access Point (Infrastructure) only). Select the same method set in the computer. Security Key Format When Security is set to WEP 64 bits or WEP 128 bits, select the same method set in the computer (unnecessary when Security is set to None). Security Key Enter the security key set in the computer (unnecessary when Security is set to None). Key Index When Security is set to WEP 64 bits or WEP 128 bits, select the same key index set in the computer (unnecessary when Security is set to None). The default setting is 1. Configure Select Auto or Manual for the method of setting the camera IP address. IP Address When Configure is set to Manual, enter the IP address for the camera. Wireless Transfer Mode 118