Nikon 8405 Instruction Manual - Page 4
Eye Relief
UPC - 018208084050
View all Nikon 8405 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
• The riflescope 3-9x40, 3-9x50 has a variable magnification from 3 to 9X, 2-7x32 from 2 to 7X. To change powers, just rotate the power selector ring until the desired magnification appears adjacent to the power index dot. (3) Adjustment of the riflescope Sighting through the riflescope, align the rifle with your aiming point on the target and shoot a trial round. If the bullet does not hit the aiming point, adjust the elevation and windage, as follows: • If the bullet hits under the aiming point, turn the elevation adjustment (counter-clockwise) in the direction of the arrow marked "U" for up as in Fig. 3-5. If the bullet hits high, turn adjustment (clockwise) in the direction of the arrow marked "D" for down. • If the bullet hits to the right of the aiming point, turn the windage adjustment (clockwise) in the direction of the arrow marked "L" for left as in Fig. 3-6. If the bullet hits to the left of the aiming point, turn adjustment (counter-clockwise) in the direction of the arrow marked "R" for right. • After the reticle has been adjusted to the point of impact, insert the tip of a screwdriver into the slot of the scale ring and rotate the scale ring so that the " " is lined up with the index dot. (Fig. 3-7, Fig. 3-8) 1) Lock Ring 2) Eyepiece Adjustment 3) Eye Relief Note: • The windage and elevation scales of the riflescope 3-9x40, 3-9x50, 27x32, and 4x32 are calibrated in division of minute of angle with a click at intervals of minute if angle (one division).