Nikon COOLPIX B500 Quick Start Guide - English for customers in the Americas - Page 19
Pair i.e., establish a Bluetooth link between the camera and the, smart device., Check
View all Nikon COOLPIX B500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
3 Pair (i.e., establish a Bluetooth link between) the camera and the smart device. • Android Devices with NFC Support After checking that NFC is enabled on the smart device, touch the camera Y (N-Mark) to the NFC antenna on the smart device to launch the SnapBridge app. - If the SnapBridge download site is displayed, download and install the app before repeating the above steps. • iOS Devices and Android Devices Without NFC Support Press the camera k button. The camera will wait for a connection; launch the SnapBridge app on the smart device and follow the on-screen instructions to tap the name of the camera you want to pair with. App SnapBridge Camera On your smart device, go to the app store and search for SnapBridge. After installing, open the SnapBridge app. Cancel Connect to Camera Camera name 4 Check the authentication code. • After confirming that the camera and smart device display the same six-digit authentication code, follow the steps below to complete pairing (note that the code may not be displayed in some versions of iOS, but you should follow the steps below even if the code is not displayed). - On the camera, press k. - On the smart device, tap Pairing (the name of the button varies with the smart device). Auth. code 000000 Confirm that the same authentication code is displayed on the smart device and press OK. Cancel OK Camera Getting Started 7