Nikon COOLPIX P1000 Reference Manual - Page 749
Wireless Remote Controllers, WR-R10 and WR-T10 Wireless Remote Controllers
View all Nikon COOLPIX P1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 749 highlights
˔ Wireless Remote Controllers • WR-R10 and WR-T10 Wireless Remote Controllers - When a WR-R10 wireless remote controller is attached to the accessory terminal, the camera can be controlled wirelessly using a WR-T10 wireless remote controller. - WR-R10 wireless remote controllers can also be used to control radiocontrolled flash units. - For synchronized release involving more than one camera, ready multiple cameras with paired WR-R10 units attached. * When connecting the WR-R10, be sure the cover for the accessory terminal and the USB and HDMI connectors is fully open. • WR-1 Wireless Remote Controller: WR-1 units are used with WR-R10 or WR-T10 wireless remote controllers or with other WR-1 remote controllers, with the WR-1 units functioning as either transmitters or receivers. When a WR-R10 or a WR-1 configured as a receiver is connected to the camera accessory terminal, a second WR-1 configured as a transmitter can be used to take pictures and adjust camera settings remotely. * When using a wireless remote controller with the WR-R10, be sure the firmware for the WR-R10 and WR-1 have been updated to the latest versions (WR-R10 firmware version 3.0 or later and WR-1 firmware version 1.0.1 or later). For information on firmware updates, see the Nikon website for your area. Consult a Nikon-authorized service representative when updating the firmware for the WR-R10 from versions prior to version 2.0 to version 3.0 or later. Other Compatible Accessories 707