Nikon COOLPIX S7000 Product Manual - Page 305
Flicker Reduction, Slot Empty Release Lock, Video Mode, Enable release, Release locked
View all Nikon COOLPIX S7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 305 highlights
Flicker Reduction G button ➜ B setup menu Reduce flicker and banding when shooting under fluorescent or mercury-vapor lighting during live view (0 162) or movie recording (0 174). Choose Auto to allow the camera to automatically choose the correct frequency, or manually match the frequency to that of the local AC power supply. A Flicker Reduction If Auto fails to produce the desired results and you are unsure as to the frequency of the local power supply, test both the 50 and 60 Hz options and choose the one that produces the best results. Flicker reduction may not produce the desired results if the subject is very bright, in which case you should select mode A or M and choose a smaller aperture (higher f-number) before starting live view. Note that flicker reduction is not available when On is selected for Movie settings > Manual movie settings (0 179) in mode M. Slot Empty Release Lock G button ➜ B setup menu Selecting Enable release allows the shutter to be released when no memory card is inserted, although no pictures will be recorded (they will however be displayed in the monitor in demo mode). If Release locked is selected, the shutter-release button is only enabled when a memory card is inserted in the camera. Video Mode G button ➜ B setup menu When connecting the camera to a television or VCR, be sure the camera video mode matches the device video standard (NTSC or PAL). B The Setup Menu: Camera Setup 281