Nikon D600 User Manual - Page 80
The Live View Display, Flicker reduction, Exposure, x
View all Nikon D600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
D The Live View Display Although they will not appear in the final picture, jagged edges, color fringing, moire, and bright spots may appear in the monitor, while bright bands may appear in some areas with flashing signs and other intermittent light sources or if the subject is briefly illuminated by a strobe or other bright, momentary light source. In addition, distortion may occur if the camera is panned horizontally or an object moves at high speed through the frame. Flicker and banding visible in the monitor under fluorescent, mercury vapor, or sodium lamps can be reduced using Flicker reduction (0 252), although they may still be visible in the final photograph at some shutter speeds. When shooting in live view mode, avoid pointing the camera at the sun or other strong light sources. Failure to observe this precaution could result in damage to the camera's internal circuitry. A Exposure Depending on the scene, exposure may differ from that which would be obtained when live x view is not used. Metering in live view is adjusted to suit the live view display, producing photographs with exposure close to what is seen in the monitor. In P, S, A, and M modes, exposure can be adjusted by ±5 EV (0 112). Note that the effects of values over +3 EV or under -3 EV can not be previewed in the monitor. 54